Ultrasonic Phased Array Testing of Composite Material Laminate
摘 要
为满足复合材料层压板在厚度方向不存在加工余量及其缺陷特征的需求,设计了具有不同大小和埋深的人工缺陷的复合材料层压板试块,利用超声相控阵检测法对该试块进行100%扫查。C扫图像显示所有人工缺陷均能被检测出来,且位于第一与第二层碳布之间 3 mm的最小缺陷清晰可辨。经实际应用表明,超声相控阵检测法可用于复合材料层压板的无损检测。
Abstract
Aiming at the problem that there was no machining allowance in the thickness dimension and considering defects feature for composite material laminate, a composite material laminate testing block of artificial defects with various dimensions and indepth was designed, 100% scanning was conducted for the testing block using the method of the ultrasonic phased array testing. The Cscan image showed that all artificial defects could be detected and the minimum 3 mm defect located between first and second layer of carbon cloths could be clearly detected. The practical application showed that the method could be used for the NDT of composite material laminate.
中图分类号 TG115.28
所属栏目 试验研究
基金项目
收稿日期 2011/4/13
修改稿日期
网络出版日期
作者单位点击查看
备注黄景兴(1981-),男,助理工程师,从事理化及无损检测技术工作。
引用该论文: HUANG JingXing,ZHU Zheng,DING NengSheng,YAN LiYong,FANG HuiBo. Ultrasonic Phased Array Testing of Composite Material Laminate[J]. Nondestructive Testing, 2012, 34(1): 43~45
黄景兴,朱政,丁能圣,闫丽永,方慧波. 复合材料层压板的超声相控阵检测[J]. 无损检测, 2012, 34(1): 43~45
被引情况:
【1】张继敏,周晖,刘奎,刘卫平, "复合材料层压结构超声相控阵检测的缺陷定量表征",无损检测 38, 20-25(2016)
【2】付汝龙,陈建华,林丹源,郑伟和,林齐梅, "复合材料的相控阵超声C扫描成像检测",无损检测 37, 38-41(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】杨乃宾,章怡宁.复合材料飞机结构设计[M].北京:航空工业出版社,2002.
【2】《国防科技工业无损检测人员资格鉴定与认证培训教材》编审委员会.超声检测[M].北京:机械工业出版社,2005.
【3】刘松平. 复合材料无损检测与缺陷评估技术[J].无损检测,2008,30(10):673-678.
【4】相控阵辅导[EB/OL]. http://www.olypumsims.com/zh/ndt tutorials/phased array.
【2】《国防科技工业无损检测人员资格鉴定与认证培训教材》编审委员会.超声检测[M].北京:机械工业出版社,2005.
【3】刘松平. 复合材料无损检测与缺陷评估技术[J].无损检测,2008,30(10):673-678.
【4】相控阵辅导[EB/OL]. http://www.olypumsims.com/zh/ndt tutorials/phased array.
相关信息