搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
非线性超声检测方法及应用
          
Review of Nonlinear Ultrasonic Testing Method

摘    要
为保证构件的安全使用,需要建立可靠的、定量的材料无损评价和表征技术。利用超声波传播的非线性特性,可以解决一些线性超声检测技术难以解决的问题。研究发现,非线性超声检测方法在闭合裂纹检测、粘接结构粘接强度评价、力学性能退化评估等方面显示出了线性超声检测无法比拟的优点。
标    签 材料无损评价   非线性特性   闭合裂纹   力学性能退化   Nondestructively evaluation for materials   Nonlinear characteristic   Close crack   Mechanical property degradation  
 
Abstract
It is necessary to establish reliable quantitative techniques for nondestructively evaluating and characterizing the materials in order to ensure the safe use of the component. The use of the nonlinear characteristic can solve some problem that linear ultrasonic testing technology is difficult to solve. With intensive research, now nonlinear ultrasonic detection method is having the incomparable advantages of linear ultrasonic testing in closed crack detection, adhesive strength assessment of adhesive structure, mechanical property degradation evaluation, etc.

中图分类号 TG115.28

 
  中国光学期刊网论文下载说明


所属栏目 综述

基金项目

收稿日期 2012/2/8

修改稿日期

网络出版日期

作者单位点击查看

备注陆铭慧(1963-),女,博士研究生,副教授,主要从事超声检测研究。

引用该论文: LU Ming-Hui,XU Xiao-Xia. Review of Nonlinear Ultrasonic Testing Method[J]. Nondestructive Testing, 2012, 34(7): 61~66
陆铭慧,徐肖霞. 非线性超声检测方法及应用[J]. 无损检测, 2012, 34(7): 61~66


被引情况:


【1】陈军,任俊, "线性和非线性超声技术检测不同裂缝宽度下的砂浆试块损伤",无损检测 37, 22-25(2015)

【2】陈军,黄灿,王豪, "超声有限幅度法检测混凝土孔洞缺陷",无损检测 38, 26-29(2016)



论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】Tribikram Kundu. Ultrasonic Nondestructive Evaluation[M]. United States of America: Crcpress,2004:363-436.
 
【2】钱祖文.非线性声学[M].北京:科学出版社,2009.
 
【3】John H Cantrell. Crystalline structure and symmetry dependence of acoustic nonlinear parameters[J]. Journal of Applied Physics,1994(76):3372-3380.
 
【4】Tae Hun Lee, Kyung Young Jhang. Experimental investigation of nonlinear acoustic effect at crack[J]. NDT&E International,2009(42):757-764.
 
【5】Nohyu Kim. Nonlinear behavior of ultrasonic wave at crack[J]. Review of QNDE,2010(29):313-318.
 
【6】施克仁.无损检测新技术[M].北京:清华大学出版社,2007:162-204.
 
【7】Koichiro Kawashima. Evaluation of minute cracks generated by spallation with nonlinear ultrasonic measurement[J]. Review of QNDE,2001(20):1283-1289.
 
【8】Koichiro Kawashima, Kouichi Sekino, Kazuyoshi Ichigo. Higher harmonic imaging of tight cracks in glass plates and weld interface with mode-converted transverse waves[J]. ISNA,2008(18):537-540.
 
【9】敦怡,师小红,徐章遂.非线性超声在金属基复合材料结构界面粘接强度评价中的应用[J].中国机械工程,2008,19(19):2351-2354.
 
【10】Wegner A. Assessment of the adhesion quality of fusion-welded silicon wafers with nonlinear ultrasound[J]. Ultrasonics,2000(38):316-321.
 
【11】Hirsekorn S. Quality assessment of bond interfaces by nonlinear ultrasonic transmission[J]. Review of QNDE,2000(19):1367-1374.
 
【12】Ryuzo Yamada, Koichiro Kawashima, Morimasa Murase. Application of nonlinear ultrasonic measurement for quality assurance of diffusion bonds of Gamma Titanium Alumiun alloy and steel[J]. Rasearch in Nondestructive Evaluation,2006(17):223-239.
 
【13】Koichiro Kawashima. Nonlinear ultrasonic imaging of imperfectly bonded interfaces[J]. Ultrasonics,2006(44):1329-1333.
 
【14】John H Cantrell, William T Yost. Nonlinear ultrasonic characterization of fatigue microstructures[J]. International Journal of Fatigue,2001(23)487-490.
 
【15】John H Cantrell. Nondestructive evaluation of metal fatigue using nonlinear acoustic[J]. Review of QNDE,2009(28):19-32.
 
【16】John H Cantrell. Acoustic nonlinearity in polycrystalline Nickel from fatigue-generated microstructures[J]. Review of QNDE,2005(24):337-344.
 
【17】John H Cantrell. Dependence of microelastic-plastic nonlinearity of martensitic stainless steel on fatigue damage accumulation[J]. Journal of Applied Physics,2006(100):1-4.
 
【18】邓明晰,裴俊峰.无损评价固体板材疲劳损伤的非线性超声兰姆波方法[J].声学学报,2008(33):360-369.
 
【19】Peter B Nagy. Fatigue damage assessment by nonlinear ultrasonic materials characterization[J]. Ultrasonic,1998(36):375-381.
 
【20】Michele Meo, Umberto Polimeno, Giuseppe Zumpano. Detecting damage in composite material using nonlinear elastic wave spectroscopy methods[J]. Appl Compos Mater,2008(15):115-126.
 
【21】Aymerich F, Staszewski W J. Impact damage detection in composite laminates using nonlinear acoustic[J]. Composites,2010(A41):1084-1092.
 
【22】Kyung-Young Jhang, Kyung-Cho Kim. Evaluation of material degradation using nonlinear acoustic effect[J]. Ultrasonic,1999(37):39-44.
 
【23】Viswanath A. Nondestructive assessment of tensile properties of cold worked AISI type 304 stainless steel using nonlinear ultrasonic technique[J]. Journal of Materials Processing Technology,2011(211):538-544.
 
【24】Kim C S, Ik-Keun Park, Kyung-Young Jhang. Nonlinear ultrasonic characterization of thermal degradation in ferritic 2.25 Cr-1 Mo steel[J]. NDT&E International,2009(42):204-209.
 
【25】Hyunjo Jeong A. Nondestructive method for estimation of the fracture toughness of CrMoV rotor steels based on ultrasonic nonlinearity[J]. Ultrasonic,2003(41):543-549.
 
【26】Koichiro Kawashima. Detection and imaging of nonmetallic inclusions in continuously cast steel plates by higher harmaonics[J]. Japanese Journal of Applied Physics,2010(49):07HC-1-4.
 
【27】Ayumu Osumi. A study of detecting internal defect in solid material using nonlinear aerial convergence ultrasonic waves[J]. Proceedings of Symposium on Ultrasonic Electronics,2011(32):511-512.
 
【28】Shiro Biwa. Quantitative evaluation of harmonic generation at contacting interface[J]. ISNA,2008(18):505-508.
 
【29】Shiro Biwa. Pressure-dependent stiffness and nonlinear ultrasonic response of contacting surface[J]. Journal of Solid Mechanics and Materials Engineering,2009(3):10-21.
 
【30】Toshihiro Ohtani. Nonlinear acoustic evaluation of creep damage in boiler heat exchange tubes[J]. Japan Journal of Applied Physics,2007(46):4577-4582.
 
【31】Minghe Liu. Expermantal study of nonlinear rayleigh wave propagation in shot-peened aluminum plates-feasibility of measuring residual stress[J]. NDT&E International,2011(44):67-74.
 
【32】常俊杰.超声波的非线性对涂层材料的质量评价[J].大连海事大学学报,2008(34):7-10.
 
相关信息
   标题 相关频次
 TKY管接点焊缝形状模型在相控阵检测中的应用
 2
 TKY管节点焊缝的超声检测
 2
 巴氏合金/钢复合层的超声成像检测
 2
 超声F-Scan成像技术检测双金属复合材料的方法
 2
 多通道动态光弹成像系统的研制
 2
 双金属转子复合层超声特征成像系统
 2
 无损检测专业实践教学体系建设的探索——南昌航空大学“测控技术与仪器”国家特色专业建设
 2
 游乐设施主轴的原位检测方法
 2
 《声学检测》课程线上教学探索与实践
 1
 SSA降噪算法在超声检测中的应用
 1
 残余应力对铝薄板Lamb波非线性效应的影响
 1
 复杂曲面粘接结构的阵列成像检测
 1
 基于偏置磁场EMAT表面波换能器效率的分析
 1
 基于涡流脉冲热成像方法的稳态闭合疲劳裂纹检测
 1
 基于相关法的C/SiC复合材料声速测量方法
 1
 硫化亚铂表面态辅助载流子复合及其光学非线性特性研究
 1
 双金属结合面缺陷的凸面相控阵超声检测
 1
 涡轮斜结合面同深度扫描超声成像检测系统的研制
 1