Ultrasonic Imaging Inspection of Melted Welds Seam
摘 要
简介了熔焊焊缝超声扫描成像检测方法,综述了目前几种常用的熔焊焊缝超声扫描成像检测方法及其特点和缺陷检测能力,并对今后熔焊焊缝超声检测技术的发展趋势进行了展望。
Abstract
The basic of ultrasonic scanning imaging technique for non-destructive testing and evaluation(NDT&E) of melted welds is reviewed in this paper. Different imaging methods based on the ultrasonic imaging technique are summarized.
中图分类号 TG115.28
所属栏目 综述
基金项目 无损检测技术教育部重点实验室基金资助项目(200929009)
收稿日期 2011/11/11
修改稿日期
网络出版日期
作者单位点击查看
备注应烨军(1987-),男,硕士研究生,从事无损检测技术相关研究。
引用该论文: YING Ye-Jun,LIU Song-Ping. Ultrasonic Imaging Inspection of Melted Welds Seam[J]. Nondestructive Testing, 2013, 35(2): 23~28
应烨军,刘松平. 熔焊焊缝超声扫描成像检测[J]. 无损检测, 2013, 35(2): 23~28
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】刘松平,刘菲菲,李乐刚,等.自动化无损检测技术及其应用[J].航空制造技术,2009(4):26-31.
【2】李生田,刘志远.焊接结构现代无损检测技术[M].北京:机械工业出版社,2000:11-13.
【3】SUBBARATNAM R, VENKATRAMAN B, BALDEV R. Time of flight diffraction-an alternative to radiography examination of thick walled stainless steel weldments[C]// 12th Asia-Pacific Conference on NDT. Auckland, New Zealand:[s.n],2006.
【4】BARKHATOV V A. Development of methods of ultrasonic nondestructive testing of welded joints[J]. Russian Journal of Nondestructive Testing,2003,1(39):23-47.
【5】刘松平,刘菲菲,郭恩明,等.先进的可视化成像无损检测技术及其应用[J].航空制造技术,2006(11):48-51.
【6】刘松平,刘菲菲,张丙法,等.管道焊缝超声多维成像检测技术[J].无损检测,2008,30(2):77-80.
【7】JEPPESEN L, J RGEN D, OLSEN HO. Subsea automated ultrasonic inspection[C]// 3rd MENDT. Bahrain Manama:[s.n],2005.
【8】MICHAEL M, SIMON L. Ultrasonic Inspection of Pressure Vessel Construction Welds using Phased Arrays[C]// 3rd Middle East NDT Conference & Exhibition. Bahrain, Manama:[s.n],2005.
【9】WASSINK C, DIJKSTRA F. Approaches for Developing Solutions for Specific NDT Problems[C]// The 2nd International Conference on Technical Inspection and NDT, Tehran, Iran:[s.n],2008.(下转第48页)
【10】冯若.超声手册[M].南京:南京大学出版社,1999:5.
【11】中国特种设备检验协会.超声检测[M].北京:中国劳动社会保障出版社,2008:137-148.
【12】庞勇,韩焱.超声成像方法综述[J].华北工学院测试技术学报,2001,15(4):280-284.
【13】刘松平,陈积懋,郭恩明.先进的超声手动扫描成像检测技术[J].无损检测, 1997,19(6):151-153.
【14】滕永平,郑中兴,崔建英,等.便携式超声波P扫描成像系统软件的设计[J].无损检测,1996,18(12):333-342.
【15】BRILLON C, ARMITT T, DUPUIS O. TOFD Inspection with Phased Arrays[C]// 17th World Conference on NDT. Shanghai:[s.n],2008.
【16】史俊伟,刘松平.浅谈超声衍射时差法(TOFD)检测技术[J].航空制造技术(增刊),2009:96-100.
【17】GINZEL E, HONARVAR F, YAGHOOTIAN A. A Study of Time-of-Flight Diffraction Technique Using Photoelastic Visualisation[C]// The 2nd International Conference on Technical Inspection and NDT. Tehran, Iran:[s.n],2008.
【18】LIU Fu-Jun, DING Shou-Bao, HU Dong-Ming, et al. Application progress of TOFD technique in China[J]. Nondestructive Testing,2009,31(10):762-768.
【19】史俊伟,刘松平.搅拌摩擦焊焊缝超声TOFD检测与缺陷评估方法[C]//全国第九届无损检测学术年会论文集.上海:[出版者不详],2010:49-53.
【20】BS 7706—1993Guide to Calibration and Setting-Up of the Ultrasonic Time of Flight Diffraction (TOFD) Technique for the Detection, Location, and Sizing of Flaws[S].
【21】MICHAEL M, SIMON L. A Complete Solution for Weld Inspections-Phased Arrays and Diffraction Sizing[C]// 17th World Conference on NDT. Shanghai, China:[s.n],2008.
【22】徐西刚,施克会,陈以方,等.相控阵超声无损检测系统的研制[J].无损检测,2004,26(3):116-119.
【2】李生田,刘志远.焊接结构现代无损检测技术[M].北京:机械工业出版社,2000:11-13.
【3】SUBBARATNAM R, VENKATRAMAN B, BALDEV R. Time of flight diffraction-an alternative to radiography examination of thick walled stainless steel weldments[C]// 12th Asia-Pacific Conference on NDT. Auckland, New Zealand:[s.n],2006.
【4】BARKHATOV V A. Development of methods of ultrasonic nondestructive testing of welded joints[J]. Russian Journal of Nondestructive Testing,2003,1(39):23-47.
【5】刘松平,刘菲菲,郭恩明,等.先进的可视化成像无损检测技术及其应用[J].航空制造技术,2006(11):48-51.
【6】刘松平,刘菲菲,张丙法,等.管道焊缝超声多维成像检测技术[J].无损检测,2008,30(2):77-80.
【7】JEPPESEN L, J RGEN D, OLSEN HO. Subsea automated ultrasonic inspection[C]// 3rd MENDT. Bahrain Manama:[s.n],2005.
【8】MICHAEL M, SIMON L. Ultrasonic Inspection of Pressure Vessel Construction Welds using Phased Arrays[C]// 3rd Middle East NDT Conference & Exhibition. Bahrain, Manama:[s.n],2005.
【9】WASSINK C, DIJKSTRA F. Approaches for Developing Solutions for Specific NDT Problems[C]// The 2nd International Conference on Technical Inspection and NDT, Tehran, Iran:[s.n],2008.(下转第48页)
【10】冯若.超声手册[M].南京:南京大学出版社,1999:5.
【11】中国特种设备检验协会.超声检测[M].北京:中国劳动社会保障出版社,2008:137-148.
【12】庞勇,韩焱.超声成像方法综述[J].华北工学院测试技术学报,2001,15(4):280-284.
【13】刘松平,陈积懋,郭恩明.先进的超声手动扫描成像检测技术[J].无损检测, 1997,19(6):151-153.
【14】滕永平,郑中兴,崔建英,等.便携式超声波P扫描成像系统软件的设计[J].无损检测,1996,18(12):333-342.
【15】BRILLON C, ARMITT T, DUPUIS O. TOFD Inspection with Phased Arrays[C]// 17th World Conference on NDT. Shanghai:[s.n],2008.
【16】史俊伟,刘松平.浅谈超声衍射时差法(TOFD)检测技术[J].航空制造技术(增刊),2009:96-100.
【17】GINZEL E, HONARVAR F, YAGHOOTIAN A. A Study of Time-of-Flight Diffraction Technique Using Photoelastic Visualisation[C]// The 2nd International Conference on Technical Inspection and NDT. Tehran, Iran:[s.n],2008.
【18】LIU Fu-Jun, DING Shou-Bao, HU Dong-Ming, et al. Application progress of TOFD technique in China[J]. Nondestructive Testing,2009,31(10):762-768.
【19】史俊伟,刘松平.搅拌摩擦焊焊缝超声TOFD检测与缺陷评估方法[C]//全国第九届无损检测学术年会论文集.上海:[出版者不详],2010:49-53.
【20】BS 7706—1993Guide to Calibration and Setting-Up of the Ultrasonic Time of Flight Diffraction (TOFD) Technique for the Detection, Location, and Sizing of Flaws[S].
【21】MICHAEL M, SIMON L. A Complete Solution for Weld Inspections-Phased Arrays and Diffraction Sizing[C]// 17th World Conference on NDT. Shanghai, China:[s.n],2008.
【22】徐西刚,施克会,陈以方,等.相控阵超声无损检测系统的研制[J].无损检测,2004,26(3):116-119.
相关信息