Analysis of the Phased Array Ultrasonic Inspection Data for MARKII Last Stage Blade Roots
摘 要
百万千瓦级核电厂常规岛低压转子的末级叶片可以实施原位的相控阵超声波自动检查,超声波数据分析是这个项目的技术难点,也是原位检查核心价值之所在。如何能在众多信号中识别缺陷信号或者排除伪缺陷信号显得尤为重要,在基于多次现场检查经验的基础上,为识别真伪缺陷信号提出了一些分析的方法。
Abstract
In the 1000MW nuclear power station, the phased array ultrasonic technique has already been used in the last stage blade root of the low pressure rotor. The ultrasonic data analysis is the key for this inspection. It is very important to correctly analyze the defect signal from many signals. In this article, there are some analysis methods which come from the on-site inspection or from some special test.
中图分类号 TG115.28
所属栏目 试验研究
基金项目
收稿日期 2012/2/21
修改稿日期
网络出版日期
作者单位点击查看
备注范岩成(1978-),男,高级工程师,硕士,主要从事核电厂在役检查。
引用该论文: FAN Yan-Cheng,XU Jin-Li. Analysis of the Phased Array Ultrasonic Inspection Data for MARKII Last Stage Blade Roots[J]. Nondestructive Testing, 2013, 35(4): 65~69
范岩成,徐金利. MARKⅡ型叶片叶根相控阵超声波检查信号的分析[J]. 无损检测, 2013, 35(4): 65~69
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
相关信息