Non-destructive Examination on PF Butt Welds of ITER Superconducting Conductor
摘 要
外方内圆的超导导体(PF)方管铠甲是国际热核聚变实验堆(ITER)托卡马克装置极向场线圈超导导体重要组成部分。为了确保其使用的安全性,需要对PF铠甲对接焊缝进行射线检测。由于PF铠甲外方内圆的结构,造成了射线检测的难度。采用了6次透照,检测时射线束倾斜一定角度的方法。试验结果表明,此方法满足铠甲焊缝无损检测的要求,并解决了黑度差的问题。
Abstract
PF jacket which is round inside and square outside is one of the most important parts of ITER Tokamak device. Radiographic test is required to ensure its safety usage. But the special shape made test technology more difficult than ordinary jacket. We try to exposure six times and make rays source tilt fixed angle to solve the existing problem. The experiment results show this method can satisfy the test requirement on the PF butt welds and avoid density difference.
中图分类号 TG115.28
所属栏目 试验研究
基金项目 ITER超导导体及校正场线圈的设计与关键技术研究(2008GB101000)资助项目
收稿日期 2012/7/25
修改稿日期
网络出版日期
作者单位点击查看
备注刘小川(1986-),女,助理工程师,主要从事核能科学与工程研究。
引用该论文: LIU Xiao-Chuan,WU Yu,WAN Yong-Sheng,XIE Long-Guang. Non-destructive Examination on PF Butt Welds of ITER Superconducting Conductor[J]. Nondestructive Testing, 2013, 35(5): 59~61
刘小川,武玉,万永升,谢龙光. ITER超导导体方管铠甲焊缝的射线检测[J]. 无损检测, 2013, 35(5): 59~61
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】强天鹏.射线检测[M].北京:中国劳动社会保障出版社,2007:129-135.
【2】ASME—2007Sec.V Nondestructive Examination[S].
【3】吕松.小径管X射线检测透照布置的探讨[J].无损检测,2010,32(7):513-514.
【2】ASME—2007Sec.V Nondestructive Examination[S].
【3】吕松.小径管X射线检测透照布置的探讨[J].无损检测,2010,32(7):513-514.
相关信息