Monitoring for Intermittent Laminate of Steel Plate Based on Phased Array Ultrasonic Technology
摘 要
针对电站钢结构主立柱翼板内部存在的断续夹层缺陷,用常规A型脉冲反射超声波检验时,按JB/T 4730—2005标准该翼板质量达到最差级别,Ⅴ级,该方法已不能满足缺陷监测要求。为解决缺陷的监测问题,进行了超声相控阵试验。试验证明在缺陷分辨率、检验灵敏度、缺陷反射波幅等方面,超声相控阵完全满足断续夹层的监测要求。在此基础上,提出了超声相控阵监测翼板断续夹层的实施方法及所需监测的关键参数等,以期为电厂的安全运行提供借鉴和参考。
Abstract
The intermittent laminate of wing plate for steel construction in thermal power plant was Ⅴ grade based on A-scan pulse-echo ultrasonic inspection while the standard of JB/T 4730—2005 was conducted. So A-scan pulse-echo ultrasonic inspection could not satisfy the requirement of monitoring. In order to solve the problem, phased array ultrasonic technology was applied. The experiment indicated that phased array ultrasonic technology could monitor the intermittent laminate based on resolution, sensitivity and reflected wave amplitude. The monitoring method and crucial parameter were proposed, which provided reference for safe operation of thermal power plant.
中图分类号 TG115.28
所属栏目 实践经验
基金项目
收稿日期 2012/5/11
修改稿日期
网络出版日期
作者单位点击查看
备注代真(1982-),男,硕士,工程师,从事电站高温设备寿命评价技术及结构完整性等研究。
引用该论文: DAI Zhen,LI Wei,JING Shang-Qian,LIU Chang-Fu,ZHAO Ji-Feng. Monitoring for Intermittent Laminate of Steel Plate Based on Phased Array Ultrasonic Technology[J]. Nondestructive Testing, 2013, 35(5): 64~67
代真,李伟,敬尚前,刘长福,赵继峰. 基于相控阵技术的钢板断续夹层监测[J]. 无损检测, 2013, 35(5): 64~67
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】单宝华,喻言,欧进萍.超声相控阵检测技术及其应用[J].无损检测,2004,26(5):235-238.
【2】ERHARD A, SCHENK G, HAUSER T, et al. New applications using phased array techniques [J]. Nuclear Engineering and Design,2001,206(2-3):325-336.
【3】钟志民,梅德松.超声相控阵技术的发展及应用[J].无损检测,2002,24(2):69-71.
【4】施克仁,郭寓岷.相控阵超声成像检测[M].北京:高等教育出版社,2010.
【5】燕会明,宋文爱,陈以方.超声相控阵成像方法研究[J].无损检测,2009,31(1):23-25.
【2】ERHARD A, SCHENK G, HAUSER T, et al. New applications using phased array techniques [J]. Nuclear Engineering and Design,2001,206(2-3):325-336.
【3】钟志民,梅德松.超声相控阵技术的发展及应用[J].无损检测,2002,24(2):69-71.
【4】施克仁,郭寓岷.相控阵超声成像检测[M].北京:高等教育出版社,2010.
【5】燕会明,宋文爱,陈以方.超声相控阵成像方法研究[J].无损检测,2009,31(1):23-25.
相关信息