Barkhausen Testing of 300 M Steel Thermal Damage
摘 要
利用激光瞬间加热的方法对300M钢表面进行激光烧伤,用来模拟机械加工过程中的磨削烧伤。通过调节激光功率大小获得不同烧伤程度的表面,并利用巴克豪森效应的方法进行检测,获得巴克豪森信号与烧伤程度之间的关系;与酸浸蚀方法对烧伤斑的检测进行验证对比。试验表明300M钢热损伤巴克豪森检测结果较酸浸蚀法更准确,灵敏度更高。
Abstract
In this paper the 300M steel surface is burned by quickly laser heating method to simulate the grind burn in the process of machining. Various degree of surface burn was got by adjusting different laser power, and the relation was acquired between the signal and the burn degree using the method of Barkhausen Noise method. The burn area is tested and analyzed by acid testing method.The testing result of burn indicates that Barkhausen testing method is more exact and more sensitive than acid testing method about 300M steel.
中图分类号 TG115.28
所属栏目 试验研究
基金项目
收稿日期 2012/9/5
修改稿日期
网络出版日期
作者单位点击查看
备注王树志(1980-),男,工程师,硕士,主要从事电磁无损检测技术研究。
引用该论文: WANG Shu-Zhi,REN Xue-Dong,QIAO Hai-Yan,GE Zi-Liang,ZHAO Meng. Barkhausen Testing of 300 M Steel Thermal Damage[J]. Nondestructive Testing, 2013, 35(7): 36~38
王树志,任学冬,乔海燕,葛子亮,赵梦. 300M钢热损伤的巴克豪森检测[J]. 无损检测, 2013, 35(7): 36~38
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】朱克兵,王泓.巴克豪森信号与300M 钢表层应力的响应特性[J].无损检测,2006,28(5):252-255.
【2】STEWART D M, STEVENS K J, KAISER A B. Magnetic Barkhausen noise analysis of stress in steel[J].Current Applied Physics,2004(4):308-311.
【3】尹何迟,颜焕元,陈立功,等.磁巴克豪森效应在残余应力无损检测中的研究现状及发展方向[J].无损检测,2008,30(1):34-36.
【4】VINCENT A, PASCO L, MORIN M, et al. Magnetic Barkhausen noise from strain-induced martensite during low cycle fatigue of 304L austenitic stainless steel[J].Acta Materialia,2005,53:4579-4591.
【5】尹何迟,陈立功,张光业,等.磁巴克豪森残余应力测量技术在热处理工艺评估中的应用[J].热处理,2008,23(2):17-20.
【6】朱正德.检查零部件表面磨削烧伤的新方法[J].工具展望,2006(1):8-10.
【7】WOJTAS A S.使用磁巴克豪森噪声法检测钢制零件磨削后的热损伤[J].轴承技术,2003(1):42-46.
【8】姚山,陈宝庆,戴利欣,等.基于激光快速加热的金属材料热扩散率及导热系数快速测量方法的研究[J].热科学与技术,2005(1):87-90.
【9】陈静,汪荣生.应用巴克豪森磁噪声技术对连杆螺栓硬度的测定[J].理化检验-物理分册,2002,38(2):67-70.
【2】STEWART D M, STEVENS K J, KAISER A B. Magnetic Barkhausen noise analysis of stress in steel[J].Current Applied Physics,2004(4):308-311.
【3】尹何迟,颜焕元,陈立功,等.磁巴克豪森效应在残余应力无损检测中的研究现状及发展方向[J].无损检测,2008,30(1):34-36.
【4】VINCENT A, PASCO L, MORIN M, et al. Magnetic Barkhausen noise from strain-induced martensite during low cycle fatigue of 304L austenitic stainless steel[J].Acta Materialia,2005,53:4579-4591.
【5】尹何迟,陈立功,张光业,等.磁巴克豪森残余应力测量技术在热处理工艺评估中的应用[J].热处理,2008,23(2):17-20.
【6】朱正德.检查零部件表面磨削烧伤的新方法[J].工具展望,2006(1):8-10.
【7】WOJTAS A S.使用磁巴克豪森噪声法检测钢制零件磨削后的热损伤[J].轴承技术,2003(1):42-46.
【8】姚山,陈宝庆,戴利欣,等.基于激光快速加热的金属材料热扩散率及导热系数快速测量方法的研究[J].热科学与技术,2005(1):87-90.
【9】陈静,汪荣生.应用巴克豪森磁噪声技术对连杆螺栓硬度的测定[J].理化检验-物理分册,2002,38(2):67-70.
相关信息