Acoustic Emission Characteristics of Compression Damage in Honeycomb Sandwich Composite
摘 要
应用声发射技术对蜂窝夹层复合材料压缩损伤过程进行了试验研究。分析载荷与声发射信号关联图,依据其损伤过程和声发射特征,发现随着加载条件下载荷的增加,复合材料的损伤逐步增大。在加载初始阶段,仅有少量声发射信号,各种表征信号量小幅度增加;在加载中期,声发射信号增多,各种表征信号量不断增大;在加载后期,声发射信号有明显突增,各种表征信号量急剧增加。复合材料压缩损伤破坏与声发射的幅值、能量、撞击、上升时间、持续时间和计数等参量特征相关。根据各阶段特征参量滤波后所得信号分布与实际断裂位置相吻合。
Abstract
Experimental studies on honeycomb sandwich composite compression damage process based on acoustic emission (AE) technique were carried out. By analyzing the load and acoustic emission signal correlation diagrams, on the basis of the damage process and acoustic emission characteristics, it was found that as load increases on the loading conditions, the composite material damage increases gradually. In the initial loading stage, only a few acoustic emission signals and kinds of AE characteristic parameters have some extent increase; in the middle of the loading, acoustic emission signals increase, and kinds of AE characteristic parameters also increase; in the later loading, acoustic signals have obvious paroxysmal increase, and kinds of AE characteristic parameters rapidly increase. It is also found that the acoustic emission characteristics such as amplitude, energy, hit, rise time, duration, count and other parameters in compression tests are useful for monitoring the damage development and failure of the specimen. The distribution of the signal which is filtered by the characteristic parameter of each stage conforms to the practical rupture position.
中图分类号 TG115.28
所属栏目 2013远东无损检测新技术论坛论文精选
基金项目 无损检测技术教育部共建重点实验室基金资助项目(20120808)
收稿日期 2013/6/17
修改稿日期
网络出版日期
作者单位点击查看
备注邬冠华(1963-),男,教授,主要从事无损检测技术教学与科研工作。
引用该论文: WU Guan-Hua,LIU Si-Yi,WU Wei,ZHONG Jing-Ling. Acoustic Emission Characteristics of Compression Damage in Honeycomb Sandwich Composite[J]. Nondestructive Testing, 2013, 35(12): 42~45
邬冠华,刘斯以,吴伟,钟静玲. 蜂窝夹层复合材料的压缩损伤声发射特征[J]. 无损检测, 2013, 35(12): 42~45
被引情况:
【1】刘双,胡斌,贺铸,李运涛, "风机叶片缺陷的无损检测方法比较与评价",无损检测 37, 47-51(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】谢宗蕻,苏霓,张磊,等.复合材料蜂窝夹芯板低速冲击损伤扩展特性[J].南京航空航天大学学报,2009,41(1):31-35.
【2】张广平,戴干策.复合材料蜂窝夹芯板及其应用[J].纤维复合材料,2000,25(2):25-29.
【3】Chotard T J. New applications of acoustic emission technique for real-time monitoring of material processes[J].Journal of Materials Science Letters,2002,(21):1261-1266.
【4】皇甫劭炜,童小燕,姚磊江,等.复合材料层合板损伤的声发射试验研究[J].机械科学与技术,2009,28(5):669-673.
【5】耿荣生,沈功田,刘时风.基于波形分析的声发射信号处理技术[J].无损检测,2002,24(6):257-261.
【6】郑洁,姚磊江,程起有,等.复合材料损伤的声发射实验研究[J].机械科学与技术,2010,29(11):1478-1481.
【7】李海斌,阳建红,刘承武,等.复合材料随机渐进失效分析与声发射监测[J].复合材料学报,2011,28(1):223-229.
【8】Dmitry S Ivanov, Fabier Baudry, Bjrn Van Den Broucke, et al. Failure analysis of triaxial braided composite[J].Composites Science and Technology,2009,69:1372-1380.
【9】Jeongguk Kim, Peter K Liaw. The nondestructive evaluation of advanced ceramics and ceramic-mareix composites[J].Composites,1997(28A):473-480.
【2】张广平,戴干策.复合材料蜂窝夹芯板及其应用[J].纤维复合材料,2000,25(2):25-29.
【3】Chotard T J. New applications of acoustic emission technique for real-time monitoring of material processes[J].Journal of Materials Science Letters,2002,(21):1261-1266.
【4】皇甫劭炜,童小燕,姚磊江,等.复合材料层合板损伤的声发射试验研究[J].机械科学与技术,2009,28(5):669-673.
【5】耿荣生,沈功田,刘时风.基于波形分析的声发射信号处理技术[J].无损检测,2002,24(6):257-261.
【6】郑洁,姚磊江,程起有,等.复合材料损伤的声发射实验研究[J].机械科学与技术,2010,29(11):1478-1481.
【7】李海斌,阳建红,刘承武,等.复合材料随机渐进失效分析与声发射监测[J].复合材料学报,2011,28(1):223-229.
【8】Dmitry S Ivanov, Fabier Baudry, Bjrn Van Den Broucke, et al. Failure analysis of triaxial braided composite[J].Composites Science and Technology,2009,69:1372-1380.
【9】Jeongguk Kim, Peter K Liaw. The nondestructive evaluation of advanced ceramics and ceramic-mareix composites[J].Composites,1997(28A):473-480.
相关信息