Microstructure and Mechanical Properties of In-situ Synthesized (TiB+La2O3)/TC4 Titanium Matrix Composite
摘 要
利用钛与镧、硼单质之间的原位反应,经真空自耗电弧熔炼与后续的热加工工艺制备了增强体含量不同的(TiB+La2O3)/TC4钛基复合材料,并研究了它的显微组织和室温拉伸性能.结果表明:该复合材料的基体为网篮状组织,增强体分布均匀,其中TiB呈短纤维状并沿加工方向分布,La2O3呈短棒状或颗粒状;与基体TC4合金相比,复合材料的室温抗拉强度均有所提高,且随着TiB与La2O3增强体含量的增多而增大,增强体起到了较好的增强作用;复合材料的拉伸断裂方式均为韧性断裂.
Abstract
In-situ synthesized (TiB+La2O3)/TC4 composites with different reinforcements contents were produced by vacuum consumable arc melting and heat treatment utilizing the reactions between Ti,B and La,and the microstructure and mechanical properties of the composite were studied.The results show that the basketweave structure and dispersed reinforcements were obtained in the composites,the short fibrous TiB reinforcement distributed along processing direction and the La2O3 reinforcement was in short-rob like and granulated state.Compared with TC4 alloy,the room temperature tensile strength of the composites increased with the increase of TiB and La2O3 reinforcement contents and the renforcements had good potentiation to the substrate.The fracture mechanism of the composites was ductile rupture.
中图分类号 TG146.2
所属栏目 材料性能及其应用
基金项目 国家重点基础研究发展计划资助项目(2012CB619600);国家自然科学基金资助项目(51371114);上海市科委学术带头人项目(12XD1402800);上海航天技术研究院-上海交大航天先进技术联合研究中心资助项目(USCAST2012-14);中国博士后基金资助项目(2014M550235);上海市博士后基金资助项目(14R21410900)
收稿日期 2013/10/17
修改稿日期 2014/8/15
网络出版日期
作者单位点击查看
备注邝玮(1989-),男,江西赣州人,硕士研究生.
引用该论文: KUANG Wei,WANG Min-min,LI Jiu-xiao,HAN Yuan-fei,HUANG Guang-fa,Lv Wei-jie,ZHANG Di. Microstructure and Mechanical Properties of In-situ Synthesized (TiB+La2O3)/TC4 Titanium Matrix Composite[J]. Materials for mechancial engineering, 2015, 39(2): 67~72
邝玮,王敏敏,李九霄,韩远飞,黄光法,吕维洁,张荻. 原位自生(TiB+La2O3)/TC4钛基复合材料的显微组织和力学性能[J]. 机械工程材料, 2015, 39(2): 67~72
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】TJONG S C,MA Z Y.Microstructural and mechanical characteristics of in situ metal matrix composites[J].Materials Science and Engineering R-Reports,2000,29(3/4):49-113.
【2】TJONG S C,MAI Y-W.Processing-structure-property aspects of particulate-and whisker-reinforced titanium matrix composites[J].Composites Science and Technology,2008,68(3/4):583-601.
【3】DANIEL B S S,MURTHY V S R,MURTY G S.Metal-ceramic composites via in-situ methods[J].Journal of Materials Processing Technology,1997,68(2):132-55.
【4】YANG Z,LU W,ZHAO L,et al.In situ synthesis of hybrid-reinforced titanium matrix composites[J].Materials Letters,2007,61(11/12):2368-72.
【5】LI Y,XIAO L,LU W,et al.Creep rupture property of in situ synthesized (TiB+La2O3)/Ti composite[J].Materials Science and Engineering:A,2008,488(1/2):415-419.
【6】XIAO L,LU W,QIN J,et al.Effects of reinforcements on creep resistance of hybrid-reinforced titanium matrix composites[J].Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science,2010,41(7):1855-1863.
【7】JIUXIAO L,LIQIANG W,JINING Q,et al.Thermal stability of in situ synthesized (TiB+La2O3)/Ti composite[J].Materials Science & Engineering:A ,2011,528(15):4883-4887.
【8】LI J,WANG L,QIN L,et al.Effect of microstructure on high temperature properties of in situ synthesized (TiB+La2O3)/Ti composite[J].Materials Characterization,2012,66:93-98.
【9】肖旅.原位自生耐热钛基复合材料的高温性能研究[D].上海:上海交通大学,2010.
【10】ZHANG X,ZHAN Y,MO H,et al.Microstructure and compressive properties of in situ synthesized Ti-Si alloy composites reinforced with La2O3 particles[J].Materials Science and Engineering:A,2009,526(1/2):185-189.
【11】COX H L.The elasticity and strength of paper and other fibrous materials[J].British Journal of Applied Physics,1952,3:72-74.
【12】NARDONE V C,PREWO K M.On the strength of discontinuous silicon carbide reinforced aluminum composites[J].Scripta Metallurgica,1986,20(1):43-48.
【13】杨志峰.多元增强钛基复合材料的微结构及性能研究[D].上海:上海交通大学,2007.
【14】吕健,王立强,覃继宁,等.氧含量对原位合成(TiB+La2O3)/Ti复合材料力学性能的影响[J].机械工程材料,2011,35(6):61-64.
【2】TJONG S C,MAI Y-W.Processing-structure-property aspects of particulate-and whisker-reinforced titanium matrix composites[J].Composites Science and Technology,2008,68(3/4):583-601.
【3】DANIEL B S S,MURTHY V S R,MURTY G S.Metal-ceramic composites via in-situ methods[J].Journal of Materials Processing Technology,1997,68(2):132-55.
【4】YANG Z,LU W,ZHAO L,et al.In situ synthesis of hybrid-reinforced titanium matrix composites[J].Materials Letters,2007,61(11/12):2368-72.
【5】LI Y,XIAO L,LU W,et al.Creep rupture property of in situ synthesized (TiB+La2O3)/Ti composite[J].Materials Science and Engineering:A,2008,488(1/2):415-419.
【6】XIAO L,LU W,QIN J,et al.Effects of reinforcements on creep resistance of hybrid-reinforced titanium matrix composites[J].Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science,2010,41(7):1855-1863.
【7】JIUXIAO L,LIQIANG W,JINING Q,et al.Thermal stability of in situ synthesized (TiB+La2O3)/Ti composite[J].Materials Science & Engineering:A ,2011,528(15):4883-4887.
【8】LI J,WANG L,QIN L,et al.Effect of microstructure on high temperature properties of in situ synthesized (TiB+La2O3)/Ti composite[J].Materials Characterization,2012,66:93-98.
【9】肖旅.原位自生耐热钛基复合材料的高温性能研究[D].上海:上海交通大学,2010.
【10】ZHANG X,ZHAN Y,MO H,et al.Microstructure and compressive properties of in situ synthesized Ti-Si alloy composites reinforced with La2O3 particles[J].Materials Science and Engineering:A,2009,526(1/2):185-189.
【11】COX H L.The elasticity and strength of paper and other fibrous materials[J].British Journal of Applied Physics,1952,3:72-74.
【12】NARDONE V C,PREWO K M.On the strength of discontinuous silicon carbide reinforced aluminum composites[J].Scripta Metallurgica,1986,20(1):43-48.
【13】杨志峰.多元增强钛基复合材料的微结构及性能研究[D].上海:上海交通大学,2007.
【14】吕健,王立强,覃继宁,等.氧含量对原位合成(TiB+La2O3)/Ti复合材料力学性能的影响[J].机械工程材料,2011,35(6):61-64.
相关信息