基于振动特性的含冲击损伤复合材料检测的有限元模拟
Finite Element Simulation of Composite Material with Impact Damage Detection Based on Vibration Characteristic
摘 要
含冲击损伤复合材料的检测对于复合材料的损伤评估和材料的发展有着重要的意义,其检测方法要求具有简洁快速等特点.通过有限元模拟引入冲击损伤,以基于振动模态固有频率和改进的模态曲率损伤因子作为损伤指标,比较了没有损伤和损伤产生后复合材料的振动特征变化情况,并分析了含冲击损伤复合材料的损伤位置、损伤程度、铺层情况等参数对于振动特征参数的影响.结果表明:基于振动模态固有频率和改进的模态曲率损伤因子作为损伤指标对含损伤复合材料进行检测和评估的方法,对于实际检测有一定的指导意义,可应用于该类含损伤复合材料的无损检测.
模态固有频率
模态曲率损伤因子
无损检测
Delamination damage
The modal frequencies
Modal curvature damage factor
Nondestructive testing
Abstract
Testing of composite materials with impact damage has an important significance for the damage assessment of composite materials and the development of materials.The damage detection method needs to be characteristic of being concise and quick.The impact damage was introduced,based on vibration modal frequencies and the improved modal curvature damage factor,the change of vibration characteristics of the composite materials with no damage and with impact damage was compared using finite element simulation.The influence of parameters such as damage location,damage level and the layer orientation of the composite material with impact damage on its vibration characteristic parameters were also studied.The results show that the method for detection and evaluation of the composite with damage based on vibration modal curvature modal frequencies and the improved damage factor is effective,which has certain guiding significance to actual test,and can be used for the nondestructive testing of composite materials with impact damage.
中图分类号 TG115.28
所属栏目 无损检测新技术发展专题
基金项目
收稿日期 2014/10/14
修改稿日期
网络出版日期
作者单位点击查看
备注杨鹏飞(1987-),男,助理工程师,主要从事复合材料无损检测研究工作.
引用该论文: YANG Peng-fei,NING Ning,ZHAN Shao-zheng,HE Xiao. Finite Element Simulation of Composite Material with Impact Damage Detection Based on Vibration Characteristic[J]. Nondestructive Testing, 2015, 37(5): 25～29
杨鹏飞,宁宁,詹绍正,何潇. 基于振动特性的含冲击损伤复合材料检测的有限元模拟[J]. 无损检测, 2015, 37(5): 25～29
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】DOEBIING S W,FARRAR C R,PRIME M B.Asumrnary review of vibration based damage identification methods[J].The Shock and Vibration Digest,1998,30(2):91-96.
【2】CARDEN E P.Vibration based condition monitoring:a review[J].Struct Health Monit,2004(3):355-377.
【3】ZOU Y,TONG L,STEVEN G P.Vibration-based model-dependent damage (delamination) identification and health monitoring for composite structures:a review[J].J Sound Vib,2000(2):357-378.
【4】DELLA C N,SHU D.Vibration of delaminated composite laminates:a review[J].Appl Mech Rev,2007(60):1-20.
【5】PIERRE V,VLADIMIR B,PATRICK T.Prediction of the propagation of impact-induced delamination in carbon/epoxy laminates[J].Composite Structures,2013(95):227-235.
【6】朱炜垚,许希武.T300/QY8911层合板低速冲击试验及有限元模拟[J].材料科学与工程学报,2013,31(1):68-73.
【7】李德葆,陆秋海.实验模态分析及其应用[M].北京:科学技术出版社,2001.
【2】CARDEN E P.Vibration based condition monitoring:a review[J].Struct Health Monit,2004(3):355-377.
【3】ZOU Y,TONG L,STEVEN G P.Vibration-based model-dependent damage (delamination) identification and health monitoring for composite structures:a review[J].J Sound Vib,2000(2):357-378.
【4】DELLA C N,SHU D.Vibration of delaminated composite laminates:a review[J].Appl Mech Rev,2007(60):1-20.
【5】PIERRE V,VLADIMIR B,PATRICK T.Prediction of the propagation of impact-induced delamination in carbon/epoxy laminates[J].Composite Structures,2013(95):227-235.
【6】朱炜垚,许希武.T300/QY8911层合板低速冲击试验及有限元模拟[J].材料科学与工程学报,2013,31(1):68-73.
【7】李德葆,陆秋海.实验模态分析及其应用[M].北京:科学技术出版社,2001.
相关信息
