The Application of Ray Testing in the Welded Parts of Complex Structure
摘 要
分析了电子束焊的加工工艺特点及生产过程中可能产生的缺陷;通过对比源在外透照和源在内周向透照的两种射线透照工艺,最终确定了最优射线检测工艺——周向分区透照,确保了产品质量并提高了检测效率.
Abstract
Due to the processing characteristics of electron beam weld,it shall produce defects in the production process.Through the comparison of two radiographic testing procedures of the source being locating outside and inside the ring work pieces,respectively,the optimal X-ray detection technology—the circumferential partition irradiating was concluded which could ensure product quality and maximize the efficiency of detection.
中图分类号 TG115.28 DOI 10.11973/wsjc201506009
所属栏目 试验研究
基金项目
收稿日期 2015/1/16
修改稿日期
网络出版日期
作者单位点击查看
备注朱绍华(1974-),女,硕士,工程师,主要从事无损检测科研与情报工作.
引用该论文: ZHU Shao-hua. The Application of Ray Testing in the Welded Parts of Complex Structure[J]. Nondestructive Testing, 2015, 37(6): 37~39
朱绍华. 环形件非环焊缝周向分区射线检测的应用[J]. 无损检测, 2015, 37(6): 37~39
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】黄刚.电子束焊接技术在航空产品中的应用[J].四川兵工学报,2010(5):73-76.
【2】郑世才.射线检测[M].北京:机械工业出版社,2008.
【3】HB/Z 60-1996 X射线照相检验[S].
【2】郑世才.射线检测[M].北京:机械工业出版社,2008.
【3】HB/Z 60-1996 X射线照相检验[S].
相关信息