Cable Routing Technique in Photovoltaic Power Plant
摘 要
介绍了光伏发电场的接线方式,对目前较为典型的光伏发电场内各区域段的电缆敷设方式进行讨论,并对电缆的路径选择、规格选型及敷设方式进行研究,提出风电场内可选用普通型电缆,且可将截面较大的电缆按最短路径进行敷设等优化建议,可以供设计人员对今后类似工程进行讨论改进。
Abstract
This paper reviews the technique of cable wiring in Photovoltaic (PV) power plant. The author analyzes the cable routing method separately due to different regions and presents numbers of optimize solutions in the fields of cable path choice, specification and route selection. These optimization suggestions are put forward that the common cable should be selected in Photovoltaic power plant and the large-size section cable is according the shortest path, which provides a reference to similar projects in the future.
中图分类号 TM615
所属栏目 新能源技术
基金项目
收稿日期 2013/4/16
修改稿日期
网络出版日期
作者单位点击查看
备注沈彬(1983-),男,助理工程师,本科,从事送电线路设计。
引用该论文: Shen Bin. Cable Routing Technique in Photovoltaic Power Plant[J]. Power & Energy, 2013, 34(3): 275~277
沈彬. 光伏发电场内电缆敷设技术[J]. 电力与能源, 2013, 34(3): 275~277
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】Thomas R M. An overview: Component development for solar thermal systems[A]. Proceedings of the 7th Inter-national Symposium on Solar Thermal Concentrating Tech-nologies[C]. Moscow Russia, 1994.
【2】William B. Stine, Richard B. Diver,“A Compendium of Solar Dish/Stirling Technology”[C].Sandia National Laboratories, January 1994.
【3】Adkins DR, Andraka CE, Moreno JB, etc. Heat Pipe Solar Receiver Development Activities at Sandia National Laboratories[A]. Proceedings of the Renewable and Advanced Energy Conference[C]. Maui, HA, 1999.
【4】Laing D, Reusch M. Design and Test Results of First and Second generation Hybrid Sodium Heat Pipe Receivers for Dish/Stirling Systems [A]. Proceeding of the ASME International Solar Energy Conference[C]. Albuquerque, NM, 1998.
【5】James A, Terry G. Thermal Performance of Solar Concen-trator/Cavity receiver systems [J]. Solar Energy, 1985, 34(2): 135-142.
【6】Jaffe L D. Test results on parabolic dish concentrators for solar thermal power systems[ J]. Solar Energy, 1989(42): 173-187.
【2】William B. Stine, Richard B. Diver,“A Compendium of Solar Dish/Stirling Technology”[C].Sandia National Laboratories, January 1994.
【3】Adkins DR, Andraka CE, Moreno JB, etc. Heat Pipe Solar Receiver Development Activities at Sandia National Laboratories[A]. Proceedings of the Renewable and Advanced Energy Conference[C]. Maui, HA, 1999.
【4】Laing D, Reusch M. Design and Test Results of First and Second generation Hybrid Sodium Heat Pipe Receivers for Dish/Stirling Systems [A]. Proceeding of the ASME International Solar Energy Conference[C]. Albuquerque, NM, 1998.
【5】James A, Terry G. Thermal Performance of Solar Concen-trator/Cavity receiver systems [J]. Solar Energy, 1985, 34(2): 135-142.
【6】Jaffe L D. Test results on parabolic dish concentrators for solar thermal power systems[ J]. Solar Energy, 1989(42): 173-187.
相关信息