Method of Surface Waviness Testing for Automotive Steel Sheets
摘 要
为了满足汽车产品设计开发选材和大规模生产中汽车用薄钢板原材料实物进厂检验评价的实际使用需求,根据国内外汽车板的生产情况,借鉴国内外薄钢板表面波纹度测试的方法,并经过大量的比对试验和验证试验,总结出了一种突出汽车用薄钢板特色、方便现场有效指导具体操作的汽车用薄钢板表面波纹度试验方法.9 a(年)的实践检验结果表明:该试验方法测试参数设置、试样制备要求和测试位置设计合理,测试流程可操作性强,测试过程稳定可靠,测试数据与钢厂无争议,是一个与ISO国际标准接轨、可在汽车行业通用的汽车用薄钢板表面波纹度试验方法.
Abstract
In order to meet the actual application requirement in automotive products material selection,design and development,as well as factory inspection and evaluation of automotive steel sheet raw materials in mass production,according to the automotive steel sheet production conditions in national & international fields and referring to the steel sheet surface waviness testing method,a kind of surface waviness testing method which highlighted the characteristics of automotive steel sheets and was convenient to effectively guide on-site specific operations,was summarized after a plenty of comparison test and verification test.9 years of testing practices and inspection results show that the testing method is reasonably designed on testing parameters setting,sampling requirement and testing positions,the testing procedure has an excellent operability,the testing process is stable and reliable,and the testing data have no controversy with steel plants.And the testing method can align with the ISO international standards,and can be generally adopted in automotive field on automotive steel sheet surface waviness testing.
中图分类号 TG84 DOI 10.11973/lhjy-wl201508010
所属栏目 标准化
基金项目
收稿日期 2015/5/7
修改稿日期
网络出版日期
作者单位点击查看
备注罗五四(1957-),男,高级工程师.
引用该论文: LUO Wu-si,LI Ling,ZHOU Cun-feng,YU Shi-ping,WANG Yi-ran,WANG Jian-guo,LIN Yi,HUANG Jin-ping. Method of Surface Waviness Testing for Automotive Steel Sheets[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2015, 51(8): 570~574
罗五四,李玲,周存锋,余世平,王屹然,王建国,林屹,黄金平. 汽车用薄钢板表面波纹度试验方法[J]. 理化检验-物理分册, 2015, 51(8): 570~574
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】GB/T 2523-2008冷轧金属薄板(带)表面粗糙度和峰值数测量方法[S].
【2】GB/T 3505-2009/ISO 4287:1997产品几何技术规范(GPS)表面结构轮廓法术语、定义及表面结构参数[S].
【3】GB/T 6062-2009/ISO 3274:1996产品几何技术规范(GPS)表面结构轮廓法接触(触针)式仪器的标称特性[S].
【4】GB/T 10610-2009/ISO 4288:1996产品几何技术规范(GPS)表面结构轮廓法评定表面结构的规则和方法[S].
【5】GB/T 16747-2009产品几何技术规范(GPS)表面结构轮廓法表面波纹度词汇[S].
【6】GB/T 18777-2009/ISO 11562:1996产品几何技术规范(GPS)表面结构轮廓法相位修正滤波器的计量特性[S].
【7】GB/T 19067.1-2003/ISO 5436-1:2000产品几何量技术规范(GPS)表面结构轮廓法测量标准 第1部分:实物测量标准[S].
【8】蒋光锐,滕华湘,张浩,等.冷轧薄板表面波纹度评价标准研究[J].表面技术,2013,42(5):112-115.
【9】SEP 1941:2012Measurement of the waviness characteristic value Wsa (1-5)on cold rolled metallic flat products[S].
【10】DIN EN 10049:2006Measurement of roughness average Ra and peak count RPc on metallic flat products[S].
【11】ASME B46.1-2009Surface texture (surface rough-ness,waviness,and lay)[S].
【12】JIS B 0610-2001Geometrical product specification (GPS)-Surface texture:Profile method-Definitions and designation of rolling circle waviness[S].
【13】罗五四.汽车用薄钢板表面波纹度测量技术研究[J].汽车科技,2011(4):77-82.
【14】罗五四,张耿旭,李玲,等.金属薄板表面粗糙度与波纹度测试截止波长重叠问题的探讨[J].理化检验-物理分册,2013,49(10):637-646.
【15】罗五四,王屹然,王生怀,等.对DIN 10049更改ISO 4288取样长度选用规则的检验试验[J].理化检验-物理分册,2014,50(8):543-553.
【2】GB/T 3505-2009/ISO 4287:1997产品几何技术规范(GPS)表面结构轮廓法术语、定义及表面结构参数[S].
【3】GB/T 6062-2009/ISO 3274:1996产品几何技术规范(GPS)表面结构轮廓法接触(触针)式仪器的标称特性[S].
【4】GB/T 10610-2009/ISO 4288:1996产品几何技术规范(GPS)表面结构轮廓法评定表面结构的规则和方法[S].
【5】GB/T 16747-2009产品几何技术规范(GPS)表面结构轮廓法表面波纹度词汇[S].
【6】GB/T 18777-2009/ISO 11562:1996产品几何技术规范(GPS)表面结构轮廓法相位修正滤波器的计量特性[S].
【7】GB/T 19067.1-2003/ISO 5436-1:2000产品几何量技术规范(GPS)表面结构轮廓法测量标准 第1部分:实物测量标准[S].
【8】蒋光锐,滕华湘,张浩,等.冷轧薄板表面波纹度评价标准研究[J].表面技术,2013,42(5):112-115.
【9】SEP 1941:2012Measurement of the waviness characteristic value Wsa (1-5)on cold rolled metallic flat products[S].
【10】DIN EN 10049:2006Measurement of roughness average Ra and peak count RPc on metallic flat products[S].
【11】ASME B46.1-2009Surface texture (surface rough-ness,waviness,and lay)[S].
【12】JIS B 0610-2001Geometrical product specification (GPS)-Surface texture:Profile method-Definitions and designation of rolling circle waviness[S].
【13】罗五四.汽车用薄钢板表面波纹度测量技术研究[J].汽车科技,2011(4):77-82.
【14】罗五四,张耿旭,李玲,等.金属薄板表面粗糙度与波纹度测试截止波长重叠问题的探讨[J].理化检验-物理分册,2013,49(10):637-646.
【15】罗五四,王屹然,王生怀,等.对DIN 10049更改ISO 4288取样长度选用规则的检验试验[J].理化检验-物理分册,2014,50(8):543-553.
相关信息