Fractal Dimension Method for Steel Corrosion Acoustic Emission Signals
摘 要
针对钢板的腐蚀检测,提出了一种运用分形维结合独立分量分析法来判断钢板腐蚀程度的方法.利用独立分量分析法将含噪混合信号分离成各自独立的成分进行去噪提取,再对提取到的去噪声发射信号进行分形维计算以降低噪声对分形维数的影响,使结果更准确.通过仿真计算结果的比较可看出,运用独立分量分析法对提取后的信号进行去噪,其分形维对声发射事件数的对应更准确.而钢板腐蚀的试验数据表明,声发射信号的分形维数受腐蚀参数的影响较小,其大小能较好地反映钢板的不同腐蚀状态.
Abstract
In view of the seriousness of the steel corrosion,the paper proposes a method of using Fractal Dimension combined with Independent Component Analysis to judge the degree of steel corrosion.Applying the method of Independent Component Analysis can separate the mixed signals into independent components to extract and denoise the received signals.And then the fractal dimension of the denoised signals was calculated.By this combined method,the effect of noise on fractal dimension can be reduced,and the result will be more accurate.The comparison of the simulation results showed that the fractal dimension of the extracted denoised signal by Independent Component Analysis was more accurate corresponding to the acoustic emission event number.The experimental data of steel corrosion indicated that the fractal dimension of AE signals was less affected by the corrosion parameters.Furthermore,the numeric value reflected the different degrees of steel corrosion well.
中图分类号 TG155.28 DOI 10.11973/wsjc201508009
所属栏目 试验研究
基金项目 辽宁省教育厅创新团队资助项目(LT2010082)
收稿日期 2014/12/24
修改稿日期
网络出版日期
作者单位点击查看
备注于洋(1967-),女,教授,博士,主要研究方向为过程检测技术.
引用该论文: YU Yang,YUAN Cai-hong,LIANG Chun-yan. Fractal Dimension Method for Steel Corrosion Acoustic Emission Signals[J]. Nondestructive Testing, 2015, 37(8): 35~38
于洋,袁彩虹,梁春宴. 钢板腐蚀声发射信号的分形方法[J]. 无损检测, 2015, 37(8): 35~38
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】汪文有,许凤旌.罐底腐蚀声发射检测数据评价方法[J].无损检测,2014,36(6):67-70.
【2】高梦秋.分形理论在机械工程中的应用[J].科技致富向导,2013(6):26.
【3】宗福兴,李政硕,汪辉,等.基于独立分量分析的罐底腐蚀声发射信号去噪方法[J].无损检测,2014,36(7):67-73.
【4】顾江,张光新,刘国华,等.基于独立分量分析的声发射信号去噪方法[J].江南大学学报:自然科学版,2008,7(1):55-59.
【5】王忠民,王信义,陈爱弟,等.基于分形维数的刀具状态在线监测新方法[J].北京理工大学学报,2000,20(4):441-444.
【2】高梦秋.分形理论在机械工程中的应用[J].科技致富向导,2013(6):26.
【3】宗福兴,李政硕,汪辉,等.基于独立分量分析的罐底腐蚀声发射信号去噪方法[J].无损检测,2014,36(7):67-73.
【4】顾江,张光新,刘国华,等.基于独立分量分析的声发射信号去噪方法[J].江南大学学报:自然科学版,2008,7(1):55-59.
【5】王忠民,王信义,陈爱弟,等.基于分形维数的刀具状态在线监测新方法[J].北京理工大学学报,2000,20(4):441-444.
相关信息