Voronoi Model in Monte Carlo Simulation of Grain Growth
摘 要
晶粒生长过程的蒙特卡罗法计算机模拟是研究晶粒生长过程的重要内容,而Voronoi模型的建立是该计算机模拟的关键.详细介绍了Voronoi模型的原理、方法和程序实现,并在程序中引入链表结构.试验表明:链表结构的引入可大幅度提高模拟效率.
Abstract
Monte Carlo computer simulation of grain growth is very important in research of grain growth.Voronoi model is the key step in this computer simulation.The principle,method and establishment of this model are introduced in this paper.List structure is applied in this model.The experiment indicates that the list structure can improve efficiency greatly in simulation.
中图分类号 TG113.1 TP391.9
所属栏目
基金项目 国家自然科学基金资助项目(50334050)
收稿日期 2004/12/13
修改稿日期 2005/3/22
网络出版日期
作者单位点击查看
备注沈满德(1973-),男,湖南永州人,硕士研究生.
引用该论文: SHEN Man-de,YU Sheng-fu,WANG Ning. Voronoi Model in Monte Carlo Simulation of Grain Growth[J]. Materials for mechancial engineering, 2006, 30(3): 11~13
沈满德,余圣甫,王宁. 蒙特卡罗法模拟晶粒生长过程中的Voronoi模型[J]. 机械工程材料, 2006, 30(3): 11~13
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张世兴,刘新田.计算机模拟焊接热影响区晶粒生长的研究进展[J].机械,2003,30(2):42-46.
【2】温俊芹,刘新田.蒙特卡罗方法及其在晶粒生长模拟中的研究进展[J].焊接技术,2002,31(2):1-3.
【3】温俊芹,刘新田,莫春立.计算机模拟在焊接微观组织中的应用[J].电焊机,2003,33(1):21-24.
【4】张世兴,刘新田,温俊芹.焊接热影响区微观结构演化的蒙特卡罗计算机模拟方法[J].电焊机,2003,33(4):1-5.
【5】陈伟元,钟晓征,谭锐,等.正常晶粒生长形貌演化的计算机模拟研究[J].功能材料,2000,31(2):175-177.
【6】陈伟元,钟晓征,谭锐,等.多晶材料晶粒生长的计算机模拟研究[J].原子与分子物理学报,2000,17(2):297-302.
【7】钟晓征,陈伟元,王豪才,等.多晶材料晶粒生长的Monte Carlo计算机模拟方法Ⅰ模拟正常晶粒生长[J].功能材料,1999,30(3):232-235.
【8】傅廷亮.基于C语言的二维细胞结构蒙特卡罗法仿真[J].微电子与计算机,1998,3:53-55.
【9】傅廷亮.计算机模拟技术[M].合肥:中国科学技术大学出版社,2001.
【10】莫春立,丁春辉,何若宏.用Monte Cralo方法模拟晶料长大[J].沈阳工业学院学报,2001,20(1):61-66.
【11】肖贡强,王丽娟,周天瑞,等.基于VB的晶粒长大的蒙特卡罗模拟[J].南方金属,2004,136:24-27.
【12】Saito Y.The Monte Carlo simulation of microstructural evolution in metals[J].Materials Science and Engineering,1997,A223:114-124.
【13】Mehnert K,Klimanek P.Grain growth in metals with strong testures:Three-dimensional Monte Carlo simulations[J].Computational Materials Science,1997,9:261-266.
【14】Lee H N,Ryoo H S,Hwan S K.Monte Carlo simulation of microstructure evolution based on grain boundary character distribution[J].Materials Science and Engineering,2000,A281:176-188.
【2】温俊芹,刘新田.蒙特卡罗方法及其在晶粒生长模拟中的研究进展[J].焊接技术,2002,31(2):1-3.
【3】温俊芹,刘新田,莫春立.计算机模拟在焊接微观组织中的应用[J].电焊机,2003,33(1):21-24.
【4】张世兴,刘新田,温俊芹.焊接热影响区微观结构演化的蒙特卡罗计算机模拟方法[J].电焊机,2003,33(4):1-5.
【5】陈伟元,钟晓征,谭锐,等.正常晶粒生长形貌演化的计算机模拟研究[J].功能材料,2000,31(2):175-177.
【6】陈伟元,钟晓征,谭锐,等.多晶材料晶粒生长的计算机模拟研究[J].原子与分子物理学报,2000,17(2):297-302.
【7】钟晓征,陈伟元,王豪才,等.多晶材料晶粒生长的Monte Carlo计算机模拟方法Ⅰ模拟正常晶粒生长[J].功能材料,1999,30(3):232-235.
【8】傅廷亮.基于C语言的二维细胞结构蒙特卡罗法仿真[J].微电子与计算机,1998,3:53-55.
【9】傅廷亮.计算机模拟技术[M].合肥:中国科学技术大学出版社,2001.
【10】莫春立,丁春辉,何若宏.用Monte Cralo方法模拟晶料长大[J].沈阳工业学院学报,2001,20(1):61-66.
【11】肖贡强,王丽娟,周天瑞,等.基于VB的晶粒长大的蒙特卡罗模拟[J].南方金属,2004,136:24-27.
【12】Saito Y.The Monte Carlo simulation of microstructural evolution in metals[J].Materials Science and Engineering,1997,A223:114-124.
【13】Mehnert K,Klimanek P.Grain growth in metals with strong testures:Three-dimensional Monte Carlo simulations[J].Computational Materials Science,1997,9:261-266.
【14】Lee H N,Ryoo H S,Hwan S K.Monte Carlo simulation of microstructure evolution based on grain boundary character distribution[J].Materials Science and Engineering,2000,A281:176-188.
相关信息