Tribological Properties of High Velocity Oxygen Fuel Sprayed Fe-Al/Cr3C2 Composite Coating
摘 要
运用高速火焰喷涂方法,选用自主研发的Fe-Al/Cr3C2喷涂材料,在20钢基体上制备了复合涂层.利用XRD分析了涂层的相组成,利用SEM分析了涂层表面以及磨损表面形貌,对涂层进行了EDAX分析,并对涂层的摩擦学特性进行了研究.结果表明:高速火焰喷涂Fe-Al/Cr3C2复合涂层中主要相包括Fe3Al、Cr3C2和α-Fe相,涂层的磨损率随温度的升高而下降,具有很好的抗高温磨损性能.
Abstract
The Fe-Al/Cr3C2 composite coating was made on 20 steel by high velocity oxygen fuel(HVOF).The surface and phases of the coating were analyzed using X-ray,SEM and EDAX.The phases of the coating included Fe3Al,Cr3C2 and α-Fe.The wear rate of the coating descended with the temperature increasing.The tribological properties of HVOF sprayed Fe-Al/Cr3C2 was excellent.
中图分类号 TG174.422
所属栏目
基金项目
收稿日期 2005/5/7
修改稿日期 2005/7/5
网络出版日期
作者单位点击查看
备注徐润生(1961-),男,内蒙古呼和浩特人,教授级高级工程师,博士研究生.
引用该论文: XU Run-sheng,XU Bin-shi,MA Shi-ning,DONG Shi-yun,ZHU Zi-xin,LIU Xiao-ming. Tribological Properties of High Velocity Oxygen Fuel Sprayed Fe-Al/Cr3C2 Composite Coating[J]. Materials for mechancial engineering, 2006, 30(6): 43~45
徐润生,徐滨士,马世宁,董世运,朱子新,刘晓明. 高速火焰喷涂Fe-Al/Cr3C2复合涂层的摩擦学特性[J]. 机械工程材料, 2006, 30(6): 43~45
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】徐滨士.推广热喷涂技术发展表面工程[J].表面工程,1990,(2):1-3.
【2】徐滨士,李长久.热喷涂技术的现状与发展[J].表面工程,1991,(1):1-27.
【3】徐滨士,李长久.热喷涂技术的应用与发展[A].第八届全国焊接会议论文集[C].北京:机械工业出版社,1998.148-156.
【4】朱子新.高速电弧喷涂Fe-Al/WC涂层形成机理及高温磨损特性[D].天津:天津大学,2002.
【5】徐维普.高速电弧喷涂Fe-Al/Cr3C2涂层研究及应用[D].上海:上海交通大学,2005.
【6】Economou S,De Bonte M P,Celis J,et al.Tribological behaviour at room temperature and at 550 ℃ of TiC-based plasma sprayed coatings in fretting gross slip conditions[J].Wear,2000,24(4):165-179.
【2】徐滨士,李长久.热喷涂技术的现状与发展[J].表面工程,1991,(1):1-27.
【3】徐滨士,李长久.热喷涂技术的应用与发展[A].第八届全国焊接会议论文集[C].北京:机械工业出版社,1998.148-156.
【4】朱子新.高速电弧喷涂Fe-Al/WC涂层形成机理及高温磨损特性[D].天津:天津大学,2002.
【5】徐维普.高速电弧喷涂Fe-Al/Cr3C2涂层研究及应用[D].上海:上海交通大学,2005.
【6】Economou S,De Bonte M P,Celis J,et al.Tribological behaviour at room temperature and at 550 ℃ of TiC-based plasma sprayed coatings in fretting gross slip conditions[J].Wear,2000,24(4):165-179.
相关信息