Precipitation Behavior of Weld Metal with AF during Weld Heat Recycling
摘 要
用Gleeble1500型热模拟机对X70管线钢多道焊焊缝金属进行了热模拟试验,对二次热循环作用后焊缝金属中各种组织尤其是大量针状铁素体组织的数量、尺寸及形貌进行了分析.结果表明:经历了二次热循环过程后,焊缝金属中存在着数量不一的先共析铁素体和块状铁素体,针状铁素体仍占据着主导地位.共感生成的二次针状铁素体在一次针状铁素体的基体上形核并以一定的速率迅速长大到有限的尺寸,一次针状铁素体和二次针状铁素体都是在奥氏体晶内形核、长大,都具有细化奥氏体晶粒、提高多道焊焊缝金属和焊接热影响区韧性的作用.
Abstract
Precipitation behavior of multipass welding metal in X70 pipe-line steel was investigated by Gleeble 1500,SEM and TEM were carried out to analysis the amount,size and morph of various microstructures,especially AF,in welding metal after suffering from secondary heat recycling.The results show that there exit little amount of the grain boundary ferrite and the grain boundary ferrite while the acicular ferrite are predominant in weld metal.The sympathetic AF nucleation nucleated on the primary AF and grown into specific size rapidly,both the primary AF and the sympathetic nucleation AF nucleated and grown in the austenite grain,they play an important role of refining the austenite grain which could improve the toughness of multipass welding metal and HAZ.
中图分类号 TG401
所属栏目
基金项目
收稿日期 2005/10/17
修改稿日期 2005/12/30
网络出版日期
作者单位点击查看
备注黄安国(1975-),男,宁夏贺兰人,讲师,博士.
引用该论文: HUANG An-guo,ZHAO Yong,ZHOU Long-zao,XIE Ming-li,ZHANG Guo-dong,LI Zhi-yuan. Precipitation Behavior of Weld Metal with AF during Weld Heat Recycling[J]. Materials for mechancial engineering, 2006, 30(10): 73~76
黄安国,赵永,周龙早,谢明立,张国栋,李志远. 针状铁素体焊缝金属二次热循环的析出行为[J]. 机械工程材料, 2006, 30(10): 73~76
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】余圣甫,雷毅,黄安国,等.氧化物冶金新进展[J].材料导报,2004,18(8):50-52.
【2】谢建新.结构用钢组织控制强化技术的进展[J].特殊钢,1999,20(3):7-12.
【3】Ma Z T,Janke D,Grain refining of structural steels by dispersion of fine oxide particles[J].Steel Research,1999,70(4-5):178-182.
【4】Gutierres I,Madariaga I,Bhadeshia H K D H.Acicular ferrite morphologies in a medium carbon microalloyed steel[J].Metall & Mater Trans,2001,32A(9):2187-2196.
【5】陈蕴博,马炜,金康.强韧微合金非调质钢的研究动向[J].机械工程材料,2001,25(3):1-6.
【6】余圣甫,余阳春,谢明立,等.二次热循环对晶内铁素体的影响[J].焊接学报,2003,24(2):89-96.
【7】蒋国昌.纯净钢及二次精炼[M].上海:上海科学技术出版社,1994.
【2】谢建新.结构用钢组织控制强化技术的进展[J].特殊钢,1999,20(3):7-12.
【3】Ma Z T,Janke D,Grain refining of structural steels by dispersion of fine oxide particles[J].Steel Research,1999,70(4-5):178-182.
【4】Gutierres I,Madariaga I,Bhadeshia H K D H.Acicular ferrite morphologies in a medium carbon microalloyed steel[J].Metall & Mater Trans,2001,32A(9):2187-2196.
【5】陈蕴博,马炜,金康.强韧微合金非调质钢的研究动向[J].机械工程材料,2001,25(3):1-6.
【6】余圣甫,余阳春,谢明立,等.二次热循环对晶内铁素体的影响[J].焊接学报,2003,24(2):89-96.
【7】蒋国昌.纯净钢及二次精炼[M].上海:上海科学技术出版社,1994.
相关信息