连接接头动态力学性能的研究进展
Development of Research on Dynamic Mechanical Properies of Joints
摘 要
研究连接接头在动态冲击载荷作用下的响应规律,对于汽车和航空航天等产品的安全高效运行具有重要的意义.从试验研究与数值模拟两个方面综述了近年来国内外接头动态力学性能研究的现状,指出应变率、温度、结构等因素对接头动态力学性能具有显著影响;介绍了目前接头动态力学的试验技术以及接头动态失效判据的应用情况.
动态性能
数值模拟
joints
dynamic mechanical property
numerical simulation
Abstract
The research on dynamic response of joints under impact load condition is of significance on safe and efficient operation of product such as automobile and space vehicle.This paper summarizes the actuality and development of dynamic mechanical property research of joints both on experiment and numerical calculation in recent years.It is pointed out that strain rate,temperature and structural factor etc.Rave significant influence on dynamic mechanical properties of joints.Current application of impact test technology of joints and dynamic failure criterion of joints are also introduced.
中图分类号 TB301
所属栏目
基金项目 国家自然科学基金资助项目(50505019)
收稿日期 2006/7/18
修改稿日期 2006/9/14
网络出版日期
作者单位点击查看
备注马啸(1981- ),男,北京人,硕士研究生.
引用该论文: MA Xiao,ZHAO Hai-yan,CAI Zhi-peng,LU Li,PENG Hui-ping. Development of Research on Dynamic Mechanical Properies of Joints[J]. Materials for mechancial engineering, 2007, 31(5): 5～8
马啸,赵海燕,蔡志鹏,鲁立,彭惠平. 连接接头动态力学性能的研究进展[J]. 机械工程材料, 2007, 31(5): 5～8
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】Lee Woei-Shyan,Lin Chi-Feng,Liu Chen-Yang,et al.Impact properties of 304L stainless steel GTAW joints evaluated by high strain rate of compression tests[J].Journal of Nuclear Materials,2004,335(3):335-344.
【2】巩水利,张建勋,裴怡,等.焊接接头动态力学的应变率效应[J].西安交通大学学报,2000,34(11):82-86.
【3】巩水利,张建勋,裴怡,等.高应变率下焊接接头的动态性能测试技术[J].焊接学报,1999,20(12):86-92.
【4】Vikas Srivastava,Arun Shukla,Venkitanarayanan Parameswaran.Experimental evaluation of the dynamic shear strength of adhesive-bonded lap joints[J].Journal of Testing and Evaluation,2000,28(6):438-442.
【5】Bezemer A A,Guyt C B,Vlot A.New impact speci-men for adhesives:optimization of high-speed-loaded adhesive joints[J].International Journal of Adhesion and Adhesives,1998,18(4):255-260.
【6】Birch R S,Alves M.Dynamic failure of structu-ral joint systems[J].Thin-Walled Structures,2000,36:137-154.
【7】Mochizuki M,An G B,Ohmura T,et al.Strength and fracture in the undermatched joint by dynamic loading-studies on characteristics of dynamic deformation and fracture in welded joint with strength heterogeneity[J].Quarterly Journal of the Japan Welding Society,2001,19(3):547-555.
【8】张建勋,巩水利.焊接接头高应变率下的动态断裂韧度分析[J].焊接学报,2002,23(4):53-56.
【9】Shul′ginov B S,Matveyev V V.Impact fatigue of low-alloy steels and their welded joints at low tempera-ture[J].International Journal of Fatigue,1997,19(8/9):621-627.
【10】Kumar Prashant,Tiwari Shishir,Singh R K.Characteri-zation of toughened bonded interface against fracture and impact loads[J].International Journ-al of Adhesion & Adhesives,2005,25(6):527-533.
【11】Martínez M A,Chocron I S,Rodríguez J,et al.Confined com-pression of elastic adhesives at high rates of strain[J].International Journal of Adhesion and Adhesives,1998,18(8/9):375-383.
【12】Yokoyama T.Experimental determination of im-pact tensile properties of adhesive butt joints with the split hopkinson bar[J].Journal of Strain Analysis,2003,38(3):233-245.
【13】Katoh Mitsuaki,Nishio Kazumasa,Yamaguchi Tomiko.Materials evaluation of diffusion bonded steel bar and its impact characteristics[J].NDT and E International,2002,35(4):263-271.
【14】Belingardi G,Goglio L,Rossetto M.Impact behaviour of bonded built-up beams:experimental results[J].Interna-tional Journal of Adhesion & Adhesives,2005,25(2):173-180.
【15】Adams R D,Harris J A.A critical assessment of the block impact test for measuring the impact strength of adhesive bonds[J].Interna-tional Journal of Adhesion and Adhesives,1996,16(2):61-71.
【16】Kihara Koichiro,Isono Hiroaki,Yamabe Hidetoshi,et al.A study and evaluation of the shear strength of adhesive layers subjected to impact loads[J].International Journal of Adhe-sion & Adhesives,2003,23(4):253-259.
【17】李玉龙,索涛,郭伟国,等.确定材料在高温高应变率下动态性能的Hopkinson杆系统[J].爆炸与冲击,2005,25(6):487-492.
【18】Pang Su-Seng,Yang Chihdar,Zhao Yi.Impact response of single-lap composite joints[J].Composites Engineering,1995,5(8):1011-1027.
【19】Sato C,Ikegami K.Dynamic deformation of lap joints and scarf joints under impact loads[J].Inter-national Journal of Adhesion & Adhesives,2000,20(1):17-25.
【20】Vaziri A,Nayeb-Hashemi H.Dynamic response of tubular joints with an annular void subjected to a harmonic axial load[J].International Journal of Adhesion & Adhesives,2002,22(5):367-373.
【21】江帆,刘堂红.帽型、点焊薄壁柱壳轴向挤压性能分析[J].中国铁道科学,2003,24(2):103-108.
【22】徐修祝,涂善东,徐思浩.胶接接头断裂及相关断裂准则探讨[J].石油化工设备,2005,34(3):37-40.
【23】Yancey Robert N.Impact Modeling of Spot Welds.Materials processing and design:Modeling,simulation and applications[C]//8th International Conference on Numerical Methods in Industrial Forming Processing.New York:Amer Inst Physics,2004.
【24】Combescure A,Delcroix F,Caplain L,et al.A finite ele-ment to simulate the failure of weld points on impact[J].International Journal of Impact Engineering,2003,28(7):783-802.
【2】巩水利,张建勋,裴怡,等.焊接接头动态力学的应变率效应[J].西安交通大学学报,2000,34(11):82-86.
【3】巩水利,张建勋,裴怡,等.高应变率下焊接接头的动态性能测试技术[J].焊接学报,1999,20(12):86-92.
【4】Vikas Srivastava,Arun Shukla,Venkitanarayanan Parameswaran.Experimental evaluation of the dynamic shear strength of adhesive-bonded lap joints[J].Journal of Testing and Evaluation,2000,28(6):438-442.
【5】Bezemer A A,Guyt C B,Vlot A.New impact speci-men for adhesives:optimization of high-speed-loaded adhesive joints[J].International Journal of Adhesion and Adhesives,1998,18(4):255-260.
【6】Birch R S,Alves M.Dynamic failure of structu-ral joint systems[J].Thin-Walled Structures,2000,36:137-154.
【7】Mochizuki M,An G B,Ohmura T,et al.Strength and fracture in the undermatched joint by dynamic loading-studies on characteristics of dynamic deformation and fracture in welded joint with strength heterogeneity[J].Quarterly Journal of the Japan Welding Society,2001,19(3):547-555.
【8】张建勋,巩水利.焊接接头高应变率下的动态断裂韧度分析[J].焊接学报,2002,23(4):53-56.
【9】Shul′ginov B S,Matveyev V V.Impact fatigue of low-alloy steels and their welded joints at low tempera-ture[J].International Journal of Fatigue,1997,19(8/9):621-627.
【10】Kumar Prashant,Tiwari Shishir,Singh R K.Characteri-zation of toughened bonded interface against fracture and impact loads[J].International Journ-al of Adhesion & Adhesives,2005,25(6):527-533.
【11】Martínez M A,Chocron I S,Rodríguez J,et al.Confined com-pression of elastic adhesives at high rates of strain[J].International Journal of Adhesion and Adhesives,1998,18(8/9):375-383.
【12】Yokoyama T.Experimental determination of im-pact tensile properties of adhesive butt joints with the split hopkinson bar[J].Journal of Strain Analysis,2003,38(3):233-245.
【13】Katoh Mitsuaki,Nishio Kazumasa,Yamaguchi Tomiko.Materials evaluation of diffusion bonded steel bar and its impact characteristics[J].NDT and E International,2002,35(4):263-271.
【14】Belingardi G,Goglio L,Rossetto M.Impact behaviour of bonded built-up beams:experimental results[J].Interna-tional Journal of Adhesion & Adhesives,2005,25(2):173-180.
【15】Adams R D,Harris J A.A critical assessment of the block impact test for measuring the impact strength of adhesive bonds[J].Interna-tional Journal of Adhesion and Adhesives,1996,16(2):61-71.
【16】Kihara Koichiro,Isono Hiroaki,Yamabe Hidetoshi,et al.A study and evaluation of the shear strength of adhesive layers subjected to impact loads[J].International Journal of Adhe-sion & Adhesives,2003,23(4):253-259.
【17】李玉龙,索涛,郭伟国,等.确定材料在高温高应变率下动态性能的Hopkinson杆系统[J].爆炸与冲击,2005,25(6):487-492.
【18】Pang Su-Seng,Yang Chihdar,Zhao Yi.Impact response of single-lap composite joints[J].Composites Engineering,1995,5(8):1011-1027.
【19】Sato C,Ikegami K.Dynamic deformation of lap joints and scarf joints under impact loads[J].Inter-national Journal of Adhesion & Adhesives,2000,20(1):17-25.
【20】Vaziri A,Nayeb-Hashemi H.Dynamic response of tubular joints with an annular void subjected to a harmonic axial load[J].International Journal of Adhesion & Adhesives,2002,22(5):367-373.
【21】江帆,刘堂红.帽型、点焊薄壁柱壳轴向挤压性能分析[J].中国铁道科学,2003,24(2):103-108.
【22】徐修祝,涂善东,徐思浩.胶接接头断裂及相关断裂准则探讨[J].石油化工设备,2005,34(3):37-40.
【23】Yancey Robert N.Impact Modeling of Spot Welds.Materials processing and design:Modeling,simulation and applications[C]//8th International Conference on Numerical Methods in Industrial Forming Processing.New York:Amer Inst Physics,2004.
【24】Combescure A,Delcroix F,Caplain L,et al.A finite ele-ment to simulate the failure of weld points on impact[J].International Journal of Impact Engineering,2003,28(7):783-802.
相关信息
