Study on the Simulated CGHAZ Microstructure and Property of JG590 Steel
摘 要
以焊接热循环的计算结果为基础,采用Gleeble-1500型热模拟试验机研究了JG590钢焊接热循环对焊接热影响区粗晶区(CGHAZ)组织、冲击韧度和硬度的影响规律,获得了模拟焊接热影响区连续冷却组织转变图(SH-CCT图):通过传热计算数据和焊接热模拟测试结果,实现了对JG590钢CGHAZ区组织性能的预测和控制.
Abstract
Based on the calculated results of the welding heat cycle,influencing rules of the welding heat cycle on the CGHAZ microstructure,impact toughness and hardness are studied by Gleeble-1500,and SH-CCT chart for JG590 steel is obtained.The paper successively realizes the prediction and the control of CGHAZ microstructure and property through the results of heat transmission calculation and thermal simulation.
中图分类号 TG401 TG457.11
所属栏目
基金项目 山东省中青年科学家奖励基金资助项目(03BS105)
收稿日期 2006/11/27
修改稿日期 2006/12/30
网络出版日期
作者单位点击查看
备注孙俊生(1963-),男,山东济南人,教授,博士.
引用该论文: SUN Jun-sheng,CHEN Ye,LUAN Shou-cheng,WANG Hou-xiao. Study on the Simulated CGHAZ Microstructure and Property of JG590 Steel[J]. Materials for mechancial engineering, 2007, 31(6): 76~78
孙俊生,陈晔,栾守成,王后孝. JG590钢模拟热影响区粗晶区的组织和性能[J]. 机械工程材料, 2007, 31(6): 76~78
被引情况:
【1】杨浩,曲锦波, "热循环对13MnNiMoR钢焊接热影响区显微组织和韧性的影响",机械工程材料 39, 37-40(2015)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张文钺.焊接冶金原理[M].北京:机械工业出版社,1997.
【2】牛济泰.材料和热加工领域的物理模拟技术[M].北京:国防工业出版社,1999.
【3】Wang H X,Sun J S.Simulation of the GMAW thermal process based on string heat source model[J].Science and Technology of Welding and Joining,2005,10(5):511-520.
【4】王后孝,孙俊生,魏艳红,等.基于点热源的GMAW焊接热输入分布模式及应用[J].焊接学报,2006,27(5):27-30.
【2】牛济泰.材料和热加工领域的物理模拟技术[M].北京:国防工业出版社,1999.
【3】Wang H X,Sun J S.Simulation of the GMAW thermal process based on string heat source model[J].Science and Technology of Welding and Joining,2005,10(5):511-520.
【4】王后孝,孙俊生,魏艳红,等.基于点热源的GMAW焊接热输入分布模式及应用[J].焊接学报,2006,27(5):27-30.
相关信息