Failure Analysis of the Fracture of Some High Strength Bolts
摘 要
对某航空设备高强度螺栓的断裂原因进行了分析.结果表明:该螺栓在电镀过程中吸入了氢,在应力作用下发生了氢脆断裂.对钢中的氢陷阱及高强钢的除氢处理进行了讨论.
Abstract
The reason of the fracture of some high strength bolts which were applied to aeronautical facility was analyzed.The results show that the high strength bolt is permeated by hydrogen and the hydrogen enbrittlement fracture occurres under stress.The hydrogen trap and hydrogen-eliminating treatment are discussed.
中图分类号 TG142.41
所属栏目
基金项目
收稿日期 2006/11/27
修改稿日期 2007/2/18
网络出版日期
作者单位点击查看
备注王俊(1976-),男,湖北枝江人,硕士.
引用该论文: WANG Jun,TANG Hong-cai. Failure Analysis of the Fracture of Some High Strength Bolts[J]. Materials for mechancial engineering, 2007, 31(10): 76~77
王俊,汤宏才. 高强度螺栓断裂失效分析[J]. 机械工程材料, 2007, 31(10): 76~77
被引情况:
【1】李春光,于洋, "机翼盖板用30CrMnSiNi2A钢螺钉断裂失效分析",机械工程材料 34, 75-78(2010)
【2】伍超群, "镀锌螺栓的断裂分析",理化检验-物理分册 45, 519-521(2009)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】牛靖,董俊明,李军,等.预热温度对30CrMnSiNi2A钢焊接冷裂纹敏感性的影响[J].西安交通大学学报,2005,39(11):1230-1234.
【2】肖纪美.应力作用下的金属腐蚀[M].北京:化学工业出版社,1990:347-348.
【2】肖纪美.应力作用下的金属腐蚀[M].北京:化学工业出版社,1990:347-348.
相关信息