Preparation and Properties of AlN/LLDPE Thermal Conductive Composites
摘 要
为提高线性低密度聚乙烯(LLDPE)材料的导热性能,利用钛酸酯偶联剂(NDZ-105)对AlN粉进行表面处理后,用粉末共混法制备了AlN/LLDPE导热复合材料;探讨了AlN和NDZ-105含量对复合材料导热性能的影响,并对其进行了DSC分析.结果表明:AlN的加入能促使复合材料结晶度的提高;复合材料的导热性能随着AlN含量的增加而增加,当AlN质量分数为50%时,材料的导热系数λ为0.883 4 W·(mK)-1,约为纯LLDPE的3倍;经NDZ-105表面处理后,复合材料的导热性能得到进一步改善.
Abstract
To improve the thermal conductive properties of the linear low density polyethylene (LLDPE),the aluminum nitride (AlN) particles surface-modified by titanate coupling reagent (NDZ-105) were added into LLDPE and AlN/LLDPE thermal conductive composites were prepared through the powder blending method.The effects of AlN and NDZ-105 content on the thermal conductive property of the composites were discussed.DSC analysis results showed that AlN could enhance the crystallinity of the composites.Results of mechanical properties revealed that the thermal conductive property of the composites increased with the increase of AlN content,and the thermal conductivity coefficient λ came up to 0.883 4 W·(mK)-1 with 50% mass fraction of AlN,being three times of that of pure LLDPE.The thermal conductive property of the composites was further improved after the surface treatment by NDZ-105.
中图分类号 TQ325.1
所属栏目 材料性能及其应用
基金项目
收稿日期 2007/9/26
修改稿日期 2008/2/26
网络出版日期
作者单位点击查看
备注张兴军(1963-),男,山东济宁人,副教授,学士.
引用该论文: ZHANG Xing-jun,WANG Ming-ming. Preparation and Properties of AlN/LLDPE Thermal Conductive Composites[J]. Materials for mechancial engineering, 2008, 32(10): 56~59
张兴军,王明明. AlN/线性低密度聚乙烯导热复合材料的制备及性能[J]. 机械工程材料, 2008, 32(10): 56~59
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】朱东生,王忠民,林琳,等.导热高分子材料研究进展[J].工程热物理学报,1999,20(1):94-97.
【2】秦明礼,曲选辉,林健凉,等.氮化铝陶瓷研究和进展[J].稀有金属材料与工程,2002,31(1):8-12.
【3】Dai Xiaming,Li Qingfeng,Ding Mingqin.Synthesis of ultra-fine AlN powders in an Al-O-C-N system[J].Tsinghua Science and Technology,1999,4(2):1480-1484.
【4】师瑞霞,尹衍升.氮化铝陶瓷的制备及其在复合材料中的应用研究[J].硅酸盐通报,2004(1):58-61.
【5】Agari Y,Ueda A,Nagai S.Thermal-conductivity of a polyethylene filled with disoriented short-cut carbon fibers[J].Journal of Applied Polymer Science,1991,43(6):1117-1124.
【6】Agari Y,Ueda A,Nagai S.Thermal-conductivity of a polymer composite[J].Journal of Applied Polymer Science,1993,49(9):1625-1634.
【7】Agari Y,Uno T.Estimation on thermal-conductivities of filled polymers[J].Journal of Applied Polymer Science,1986,32(7):5705-5712.
【8】Agari Y,Ueda A,Tanaka M,et al.Thermal-conductivity of a polymer filled with particles in the wide-range from low to superhigh volume content[J].Journal of Applied Polymer Science,1990,40(5):929-941.
【9】Agari Y,Uno T.Thermal-conductivity of polymer filled with carbon materials-effect of conductive particle chains on thermal-conductivity[J].Journal of Applied Polymer Science,1985,30(5):2225-2235.
【2】秦明礼,曲选辉,林健凉,等.氮化铝陶瓷研究和进展[J].稀有金属材料与工程,2002,31(1):8-12.
【3】Dai Xiaming,Li Qingfeng,Ding Mingqin.Synthesis of ultra-fine AlN powders in an Al-O-C-N system[J].Tsinghua Science and Technology,1999,4(2):1480-1484.
【4】师瑞霞,尹衍升.氮化铝陶瓷的制备及其在复合材料中的应用研究[J].硅酸盐通报,2004(1):58-61.
【5】Agari Y,Ueda A,Nagai S.Thermal-conductivity of a polyethylene filled with disoriented short-cut carbon fibers[J].Journal of Applied Polymer Science,1991,43(6):1117-1124.
【6】Agari Y,Ueda A,Nagai S.Thermal-conductivity of a polymer composite[J].Journal of Applied Polymer Science,1993,49(9):1625-1634.
【7】Agari Y,Uno T.Estimation on thermal-conductivities of filled polymers[J].Journal of Applied Polymer Science,1986,32(7):5705-5712.
【8】Agari Y,Ueda A,Tanaka M,et al.Thermal-conductivity of a polymer filled with particles in the wide-range from low to superhigh volume content[J].Journal of Applied Polymer Science,1990,40(5):929-941.
【9】Agari Y,Uno T.Thermal-conductivity of polymer filled with carbon materials-effect of conductive particle chains on thermal-conductivity[J].Journal of Applied Polymer Science,1985,30(5):2225-2235.
相关信息