纯铝表面机械研磨纳米化后的显微组织和硬度
Microstructure and Hardness of Pure Aluminum Surface Nanocrystallization after SMAT
摘 要
对纯铝进行表面机械研磨处理形成纳米层,用XRD、TEM对表面纳米层进行了表征,并对沿深度方向的硬度变化进行分析.结果表明:晶粒细化后的主要微观特征是在原始晶粒内形成位错缠结、位错胞和高密度位错墙;随着应变的增加,这些位错组态逐渐演变成位错胞、亚晶、位错墙-显微带结构和层状胞块结构;随着应变和应变速率的进一步增加,晶粒细化遵循逐渐细分原则,逐渐在表面形成随机取向的纳米晶;与试样心部硬度相比,其表面硬度明显提高.
晶粒细化
硬度
表面机械研磨
surface nanocrystallization
grain refinement
hardness
surface mechaincal attrition treatment
Abstract
A nanostructured surface layer was formed on pure Al by means of surface mechanical attrition treatment (SMAT).The microstructure of the surface layer of the sample treated by SMAT was characterized by means of X-ray diffraction(XRD) and transmission electron microscopy (TEM).Hardness variation along the depth direction was tested.The results showed that the grain refinement process at the surface layer involves formation of dislocation tangles (DTs),dislocation cells (DCs) and dense dislocation walls (DDWs) in original grains.With the increase of strain the dislocation walls and tangling transformed into dislocation cells,subgrains,dense dislocation walls-microbands (DDWs-MBs) and lamellar boundaries (LBs).With the increase of strain and strain rate further,grains were subdivided on a smaller scale and finally equiaxed nanocrystallites with random crystallographic orientations were formed.The hardness of nanostructured surface layer was enhanced significantly after SMAT compared with that of the initial sample.
中图分类号 TG113.1 TG146.2
所属栏目 新材料 新工艺
基金项目 国家自然科学基金资助项目(50471070,50644041);教育部新世纪优秀人才资助项目(NCET-04-0257);山西省自然科学基金资助项目(20051050)
收稿日期 2007/12/19
修改稿日期 2008/5/26
网络出版日期
作者单位点击查看
备注邹途祥(1982-),男,江西临川人,硕士研究生.
引用该论文: ZOU Tu-xiang,WEI Ying-hui,HOU Li-feng,XU Bing-she,LIU Gang. Microstructure and Hardness of Pure Aluminum Surface Nanocrystallization after SMAT[J]. Materials for mechancial engineering, 2009, 33(1): 40～43
邹途祥,卫英慧,侯利锋,许并社,刘刚. 纯铝表面机械研磨纳米化后的显微组织和硬度[J]. 机械工程材料, 2009, 33(1): 40～43
共有人对该论文发表了看法，其中：
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】Lu K.Nanocrystalline metals crystallized from amorphous so-lids: Nanocrystallization structure and properties[J].Mater Sci Eng R,1996,16:161-221.
【2】Jang J S C,Koch C C.Hall-petch relationship in nanocrysta-lline iron produced by ball milling[J].Scr Metall Mater,1990,24:1599-1604.
【3】Jeong D H,Gonzalez F,Palumbo G,et al.The effect of grain size on the wear properties of electrodeposited nanoorystalline nickel coatings[J].Scripta Mater,200,44:493-499.
【4】Erb U,Elsherik A M,Palumbo G,et al.Synthesis,structure and properties of electroplated nanocrystalline materials[J].Nanostr Mater,1993,2(4):383-390.
【5】Koch C C.Synthesis of nanostructured materials by mechanical milling problems and opportunities[J].Nanostr Mater,1997,9(1):13-22.
【6】Valiev R Z,Islamgaliev R K,Alexandrov I V. Bulk nanostructured materials from severe plastic deformation[J].Progr Mat Sci,2000,45:103-189.
【7】卢柯,吕坚.一种金属材料表而纳米层的制备方法:中国,99122670.4[P].1999-12-24.
【8】Liu Q,Juul Jensen D,Hansen N.Effect of grain orientation on deformation structure in cold-rolled polycryatalline alumi-nium[J].Acta mater,1998,46:5819-5838.
【2】Jang J S C,Koch C C.Hall-petch relationship in nanocrysta-lline iron produced by ball milling[J].Scr Metall Mater,1990,24:1599-1604.
【3】Jeong D H,Gonzalez F,Palumbo G,et al.The effect of grain size on the wear properties of electrodeposited nanoorystalline nickel coatings[J].Scripta Mater,200,44:493-499.
【4】Erb U,Elsherik A M,Palumbo G,et al.Synthesis,structure and properties of electroplated nanocrystalline materials[J].Nanostr Mater,1993,2(4):383-390.
【5】Koch C C.Synthesis of nanostructured materials by mechanical milling problems and opportunities[J].Nanostr Mater,1997,9(1):13-22.
【6】Valiev R Z,Islamgaliev R K,Alexandrov I V. Bulk nanostructured materials from severe plastic deformation[J].Progr Mat Sci,2000,45:103-189.
【7】卢柯,吕坚.一种金属材料表而纳米层的制备方法:中国,99122670.4[P].1999-12-24.
【8】Liu Q,Juul Jensen D,Hansen N.Effect of grain orientation on deformation structure in cold-rolled polycryatalline alumi-nium[J].Acta mater,1998,46:5819-5838.
相关信息
