Microstructure and Properties of Zr-4 Alloy after Surface Mechanical Attrition Treatment
摘 要
利用表面机械研磨处理(SMAT)技术对Zr-4合金进行了表面纳米化处理,用XRD、光学显微镜、表面粗糙度仪对经SMAT不同时间合金表层的物相组成、平均晶粒尺寸、显微组织和表面粗糙度进行了分析,并使用硬度计测试了距表面不同深度处的硬度.结果表明:经SMAT后Zr-4合金表层的物相组成未改变;SMAT 15 min后Zr-4合金表层平均晶粒尺寸达到最小约为20 nm;SMAT后合金表层出现了一定厚度的塑性变形层;SMAT 60 min后合金表层的硬度约为基体硬度的1.3倍,且沿着深度方向逐渐减小;合金表面粗糙度随SMAT时间的延长先增大后减小最后趋于平稳.
Abstract
Surface nanocrystallization of Zr-4 alloy was conducted by means of surface mechanical attrition treatment (SMAT). The surface layers of samples processed SMAT for different times were characterized by means of X-ray diffraction,optical microscope and roughness instrument. Microhardness tester was applied to identify the hardness of the sample at different depths. The results show that SMAT didnt change the XRD patterns of the sample. The average grain size of Zr-4 alloy surface was refined to the minimum value of 20 nm after SMAT for 15 min. A certain thickness of plastic deformation layer formed on the surface after SMAT. After SMAT for 60 min,the surface hardness of the alloy was about 1.3 times of the base hardness and decreased with the increase of the depth from the surface. Roughness of the alloy increased first and then declined to a stable value with the increase of SMAT time.
中图分类号 TG146.4 TG113.1
所属栏目 材料性能及其应用
基金项目 国家自然科学基金重点资助项目(5043430);陕西省教育厅专项基金资助项目(07JK307)
收稿日期 2008/4/21
修改稿日期 2008/12/15
网络出版日期
作者单位点击查看
备注段晓鸽(1982-),女,陕西西安人,硕士研究生.
引用该论文: DUAN Xiao-ge,ZHAO Xi-cheng,ZHANG Cong-hui,LAN Xin-zhe,HE Xiao-mei. Microstructure and Properties of Zr-4 Alloy after Surface Mechanical Attrition Treatment[J]. Materials for mechancial engineering, 2009, 33(4): 89~92
段晓鸽,赵西成,张聪慧,兰新哲,何晓梅. 表面机械研磨处理后Zr-4合金的组织与性能[J]. 机械工程材料, 2009, 33(4): 89~92
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】LU K,LU L. Surface nanocrystallization of metallic materials presentation of the concept behind a new approach[J].Journal of Materials Science and Technology,1999,15(3):193-197.
【2】张聪慧,刘研蕊,兰新哲.钛合金表面高能喷丸纳米化后的组织与性能[J].热加工工艺,2006,35(2):5-7.
【3】TAO N R,SUI M L. Surface nanocrystallization of iron induced by ultrasonic shot peening,nanostructure[J].Mater,1999,11(4):433-440.
【4】LIU G,WANG S C,LOU X F,et al. Low carbon steel with nanostructured surface layer induced by high energy shot penning[J].Scripte Materialia,2001,44(8):1791-1795.
【5】LIU G,LU J,LU K. Surface nanocrystallizatin of 316L stainless steel induced by ultrosonic shot peening[J].Mater Sci Eng A,2000,286:91-99.
【6】温爱玲,陈春焕,郑德有,等.高能喷丸表面纳米化对工业纯钛组织性能的影响[J].表面技术,2003,32(3):16-18.
【7】HALL W H. X ray line broadening in metals[J].Proceedings of the Physical Society,1949,A62:741.
【8】张淑兰,陈怀宁,林泉洪.工业纯钛的表面纳米化及其机制[J].有色金属,2003,55(4):5-12.
【9】徐滨士.纳米表面工程[M].北京:化学工业出版社,2004:360.
【10】杨磊,赵秀娟,陈春焕,等.纯钛高能喷丸表面纳米化后粗糙度的分析[J].中国表面工程,2006,19(4):44-45.
【2】张聪慧,刘研蕊,兰新哲.钛合金表面高能喷丸纳米化后的组织与性能[J].热加工工艺,2006,35(2):5-7.
【3】TAO N R,SUI M L. Surface nanocrystallization of iron induced by ultrasonic shot peening,nanostructure[J].Mater,1999,11(4):433-440.
【4】LIU G,WANG S C,LOU X F,et al. Low carbon steel with nanostructured surface layer induced by high energy shot penning[J].Scripte Materialia,2001,44(8):1791-1795.
【5】LIU G,LU J,LU K. Surface nanocrystallizatin of 316L stainless steel induced by ultrosonic shot peening[J].Mater Sci Eng A,2000,286:91-99.
【6】温爱玲,陈春焕,郑德有,等.高能喷丸表面纳米化对工业纯钛组织性能的影响[J].表面技术,2003,32(3):16-18.
【7】HALL W H. X ray line broadening in metals[J].Proceedings of the Physical Society,1949,A62:741.
【8】张淑兰,陈怀宁,林泉洪.工业纯钛的表面纳米化及其机制[J].有色金属,2003,55(4):5-12.
【9】徐滨士.纳米表面工程[M].北京:化学工业出版社,2004:360.
【10】杨磊,赵秀娟,陈春焕,等.纯钛高能喷丸表面纳米化后粗糙度的分析[J].中国表面工程,2006,19(4):44-45.
相关信息