Transient Liquid-phase Bonding with Two-step Heating Process of TP304H/12Cr2MoWVTiB Dissimilar Steel Pipe
摘 要
采用传统的和双温瞬时液相扩散(TLP)焊接工艺对TP304H/12Cr2MoWVTiB异种钢管进行了焊接,研究了不同焊接工艺对接头组织与性能的影响.结果表明:采用双温TLP焊接工艺所获得的焊接接头的组织和性能优于传统TLP焊接工艺的;采用1 240 ℃加热30 s、1 200 ℃加热3 min的双温焊接工艺所获得的接头抗拉强度为570 MPa,弯曲角达180°时不断裂.
Abstract
The TP304H/12Cr2MoWVTiB dissimilar steel pipe were welded by traditional transient liquid-phase(TLP) bonding and two-step heating TLP bonding process respectively.The influences of the different welding processes on microstructure and mechanical properties of bonding joint were studied.The results show that the joint obtained by twe step TLP bonding process had better microstructure and properties than that of obtained by traditional TLP process.The joint had a tensile strength of 570 MPa,and was not fractured up to bending angle of 180° as the steel pipes were heated at 1 240 ℃ for 30 s,and then at 1 200 ℃ for 3 min.
中图分类号 TG456.9
所属栏目 新材料 新工艺
基金项目
收稿日期 2008/7/29
修改稿日期 2009/3/18
网络出版日期
作者单位点击查看
备注陈思杰(1964-),男,河南沁阳人,副教授,博士.
引用该论文: CHEN Si-jie,GAO Zeng. Transient Liquid-phase Bonding with Two-step Heating Process of TP304H/12Cr2MoWVTiB Dissimilar Steel Pipe[J]. Materials for mechancial engineering, 2009, 33(8): 28~31
陈思杰,高增. TP304H/12Cr2MoWVTiB异种钢管的双温瞬时液相扩散焊工艺[J]. 机械工程材料, 2009, 33(8): 28~31
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】赖新华.TP304H与12Cr1MoV锅炉管异种钢的焊接[J].焊管,2002(2):23-25.
【2】范长信,张红军,周荣灿.超超临界机组锅炉用新型耐热钢的焊接[J].电力设备,2006(4):12-16.
【3】MACDOWALD W D,EAGAR T W.Transient liquid phase bonding[J].Annu Rev Mater Sci,1992,22(8):23-46.
【4】井晓天,陈思杰,卢俊峰,等.TP304H/12Cr1MoV异种钢管的瞬时液相扩散焊接[J].焊接学报,2006(2):97-101.
【5】陈思杰,井晓天,李辛庚.瞬时液相扩散焊接的双温工艺模型[J].焊接学报,2005,4(4):69-73.
【6】SHIRZADI A A,WALLACH E R.Analytical modelling of transient liquid phase (TLP) diffusion bonding when a temperature gradient is imposed[J].Acta Materialia,1999,47(13):3551-3560.
【2】范长信,张红军,周荣灿.超超临界机组锅炉用新型耐热钢的焊接[J].电力设备,2006(4):12-16.
【3】MACDOWALD W D,EAGAR T W.Transient liquid phase bonding[J].Annu Rev Mater Sci,1992,22(8):23-46.
【4】井晓天,陈思杰,卢俊峰,等.TP304H/12Cr1MoV异种钢管的瞬时液相扩散焊接[J].焊接学报,2006(2):97-101.
【5】陈思杰,井晓天,李辛庚.瞬时液相扩散焊接的双温工艺模型[J].焊接学报,2005,4(4):69-73.
【6】SHIRZADI A A,WALLACH E R.Analytical modelling of transient liquid phase (TLP) diffusion bonding when a temperature gradient is imposed[J].Acta Materialia,1999,47(13):3551-3560.
相关信息