搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
基于《机械工程材料》杂志的科技期刊质量评价模型
          
Evaluation Model of Quality of Scientific and Technical Periodicals Based on Materials for Mechanical Engineering Journal

张利   王瑜   张涛  
摘    要
以《机械工程材料》杂志3 a共36期刊物每期发表论文的基本情况统计数据为基础,根据BP人工神经网络算法原理,建立了科技期刊每期质量与载文量、基金论文比、研究院校作者比这3个评价指标之间的关系模型,并分析了各指标对每期质量的影响程度.结果表明:BP人工神经网络用于科技期刊每期质量的评价是可行的,所建模型能很好地评价每期杂志的实际质量,可以作为一种科技期刊质量评价方法推广应用,特别是可用于对科技期刊每期质量进行出版前预评:其中载文量是影响科技期刊每期质量的最主要指标,基金论文比和研究院校作者比居其次,且影响程度大致相同.
标    签 科技期刊   质量   人工神经网络   评价模型   scientific and technical periodical   quality   artificial neural network:evaluation model  
 
Abstract
Based on the statistical data about basic situation of papers published in per issue among 36 issues in 3 years of Materials for Mechanical Engineering journal,the predicting model for the relation between per issue quality of the scientific and technical periodical and 3 evaluation factors which were paper quantity,rate of articles supported by foundations and rate of authors from academe and universities had been developed with back propagation (BP) artificial neural network method,and the extent of the influence caused by the factors on per issue quality of scientific and technical periodicals had been analyzed.The results show that it is feasible to evaluate the per issue quality of the scientific and technical periodicals by BP artificial neural network method,and the model which can primely evaluate the practical quality of per issue is worth of spreading and popularizing for the quality evaluation of scientific and technical periodicals,especially for the pre-evaluation of per issue quality of the scientific and technical periodicals before publication.The main influencing factor on per issue quality of scientific and technical periodicals is paper quantity,and the next ones whose influence degree are about the same are rate of articles supported by foundations and rate of authors from academe and universities.

中图分类号 G255

 
  中国光学期刊网论文下载说明


所属栏目 其他

基金项目 2007年北京高校图书馆科研基金资助项目;2008年北京科技大学科研基金资助项目(00009168)

收稿日期 2009/2/9

修改稿日期 2009/11/11

网络出版日期

作者单位点击查看

备注张利(1974-),女,重庆人,馆员,硕士.

引用该论文: ZHANG Li,WANG Yu,ZHANG Tao. Evaluation Model of Quality of Scientific and Technical Periodicals Based on Materials for Mechanical Engineering Journal[J]. Materials for mechancial engineering, 2010, 34(3): 88~92
张利,王瑜,张涛. 基于《机械工程材料》杂志的科技期刊质量评价模型[J]. 机械工程材料, 2010, 34(3): 88~92


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】段青.核心期刊评价的基础理论研究[J].情报科学,2009,27(1):74-77.
 
【2】赖茂生,屈鹏,赵康.论期刊评价的起源和核心要素[J].重庆大学学报:社会科学版,2009,15(3):67-72.
 
【3】俞立平,潘云涛,武夷山.学术期刊评价指标选取若干问题的思考[J].情报杂志,2009,28(3):75-77,100.
 
【4】田玲,邱会中,郑莉华.基于神经网络的电信客户流失预测主题建模及实现[J].计算机应用,2007,27(9):2294-2297.
 
【5】李雪萍,冯凯.基于神经网络的图书馆服务用户满意度评价体系[J].情报杂志,2006(3):87-88.
 
【6】赵磊.基于RBF的高校图书馆信息化水平评价[J].现代情报,2008(4):131-132,135.
 
【7】VAN LEEUWEN T N,VISSER M S,MOED H F,et al.The holy grail of science policy: exploring and combining biblometric tools in search of scientific excellence[J].Scientometrics,2003,57(2):257-280.
 
【8】RONALD N K.Citation analysis of research performer quality[J].Scientometrics,2002,53(1):49-71.
 
【9】HIRSCH J E.An index to qualify an individual’s scientific research output[J].Proceedings of the National Academy of Sciences,2005,102(46):16569-16572.
 
【10】张苏江,许宗运.数据统计分析软件SPSS的应用(一)[J].畜牧与兽医,2003,35(3):23-24.
 
【11】徐洪钟,吴中如,施斌,等.确定大坝效应量分量比例的神经网络方法[J].水利学报,2003(6):111-114.
 
相关信息
   标题 相关频次
 06Ni9DR钢焊接对接接头的射线底片评定
 2
 700 ℃超超临界火电机组用高温材料研究进展
 2
 TC11钛合金高周疲劳性能的定量表征
 2
 TOFD检测质量控制
 2
 爆炸焊接复合板的超声C扫描成像
 2
 不同焊接方法下20Mn23Al无磁钢焊接接头的显微组织与性能
 2
 超临界汽轮机中压调速汽阀2Cr12NiMo1W1V钢阀杆断裂原因分析
 2
 超声提取-气相色谱-质谱法测定水体沉积物中16种多环芳烃
 2
 传感器提离高度对瞬变电磁法检测信号的影响
 2
 电磁法检测油气管道缺陷的影响参数分析
 2
 电站汽动给水泵0Cr13Ni4Mo不锈钢主轴断裂失效分析
 2
 动态直流杂散电流干扰下试片断电法影响因素
 2
 多光谱技术研究隐丹参酮与人血清白蛋白的相互作用
 2
 二元无机溶液的折射分析
 2
 分光光度法测定大气降水中过氧化氢
 2
 分光光度法测定冻干粉针剂和滴眼液中甲磺酸帕珠沙星
 2
 分光光度法测定片剂中的盐酸氯丙嗪
 2
 风机叶片紧固螺栓断裂原因
 2
 风力发电机组主轴连接螺栓断裂原因分析
 2
 干/湿NaCl盐雾条件下钢芯铝绞(ACSR)导线腐蚀层结构及腐蚀机理
 2
 高流速辉光放电质谱法测定镍基单晶高温合金中43种痕量元素
 2
 高温时效Super304H耐热钢的组织、硬度及其关系模型
 2
 高压输电耐张线夹的腐蚀行为及其影响因素
 2
 隔离开关用Al-Mg-Cu合金引流板的腐蚀原因
 2
 管道腐蚀脉冲涡流检测的三维仿真与试验
 2
 管道缺陷位置对瞬变电磁检测信号的影响
 2
 痕量亚硝酸根的光度测定——基于亚硝酸根对溴酸钾氧化甲酚红的催化作用
 2
 火电机组给水前置泵轴断裂原因分析
 2
 基于X射线数字成像技术的500 kV输电线路四分裂导线间隔棒断裂分析
 2
 基于超声波粗晶检测技术的汽轮机汽门螺栓断裂分析
 2