Effect of Technical Data of an Industrial CT on its Performance(Continuation): a Guide for Industrial CT System Selection
摘 要
叙述了工业CT技术参数对性能指标的影响,以便读者在选择和购买工业CT设备时,能恰如其分地提出技术要求,合理地在性能和价格之间取得折中。
Abstract
The influence of technical specifications of industrial computed tomography(ICT) equipment on its application performance is discussed. So that the readers are able to put forward their technical requirement appropriately and make a reasonable trade-off between the performance and price, when they prepare to select or purchase a ICT equipment.
中图分类号 TG115.28
所属栏目 综 述
基金项目
收稿日期 2006/4/28
修改稿日期
网络出版日期
作者单位点击查看
备注张朝宗(1938-),男,研究员,从事无损检测科研工作。
引用该论文: ZHANG Chao-zong. Effect of Technical Data of an Industrial CT on its Performance(Continuation): a Guide for Industrial CT System Selection[J]. Nondestructive Testing, 2007, 29(3): 142~145
张朝宗. 工业CT技术参数对性能指标的影响(续)——兼谈如何选择工业CT产品[J]. 无损检测, 2007, 29(3): 142~145
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】康克军.实验工业CT系统及其图像重建方法研究[D].北京:清华大学,1988.
【2】张朝宗,郭志平,吕军震.检测陶瓷零件的微焦点X-CT实验研究[J].科学技术研究成果公报,1993(11):29.
【3】张朝宗,郭志平,吕军震,等.用于检测陶瓷零件的微焦点X-CT实验系统[J].CT理论与应用研究,1991(2):5-9.
【4】Zhiping Guo, Qing Ye, Jiemo Tian, et al. High-resolution CT tests cramic parts[J]. American Ceramic Society Bulletin,2000,79(1):59.
【5】陈志强,李 亮,冯建春.高能射线工业CT最新进展[J].CT理论与应用研究,2005,14(4):1-4.
【6】Chaozong Zhang, Zhiping Guo, Xiangang Wang, et al. 3-D computed tomography for testing ceramic parts[J]. American Ceramic Society Bulletin,2002,81(7):57.
【7】倪培君,王存龙,李旭东.工业CT系统的结构及配置[J].无损检测,1996,18(3):84-87.
【8】Jiang Hsieh,著.计算机断层成像——原理、设计、伪像和进展[M].张朝宗,郭志平,王贤刚,等,译.北京:科学出版社,2006.
【9】GJB 5312—2004 工业射线层析成像(CT)检测[S].
【10】GJB 5311—2004 工业CT系统性能测试方法[S].
【11】ASTM Standard E-1672-95 Standard Guide for Computed Tomography (CT) System Selection[S].
【2】张朝宗,郭志平,吕军震.检测陶瓷零件的微焦点X-CT实验研究[J].科学技术研究成果公报,1993(11):29.
【3】张朝宗,郭志平,吕军震,等.用于检测陶瓷零件的微焦点X-CT实验系统[J].CT理论与应用研究,1991(2):5-9.
【4】Zhiping Guo, Qing Ye, Jiemo Tian, et al. High-resolution CT tests cramic parts[J]. American Ceramic Society Bulletin,2000,79(1):59.
【5】陈志强,李 亮,冯建春.高能射线工业CT最新进展[J].CT理论与应用研究,2005,14(4):1-4.
【6】Chaozong Zhang, Zhiping Guo, Xiangang Wang, et al. 3-D computed tomography for testing ceramic parts[J]. American Ceramic Society Bulletin,2002,81(7):57.
【7】倪培君,王存龙,李旭东.工业CT系统的结构及配置[J].无损检测,1996,18(3):84-87.
【8】Jiang Hsieh,著.计算机断层成像——原理、设计、伪像和进展[M].张朝宗,郭志平,王贤刚,等,译.北京:科学出版社,2006.
【9】GJB 5312—2004 工业射线层析成像(CT)检测[S].
【10】GJB 5311—2004 工业CT系统性能测试方法[S].
【11】ASTM Standard E-1672-95 Standard Guide for Computed Tomography (CT) System Selection[S].
相关信息