Automotive Measurement for Defect Depth of Composite Material in Infrared Nondestructive Testing
摘 要
红外热波检测复合材料的缺陷深度计算中, 由于其热扩散系数随材料铺层方式及材料温度的不同而不同, 致使缺陷深度不易实现自动测量。为此, 依据一维热传导理论模型, 用非线性拟合方法, 从红外热图序列获取了被测材料的热扩散系数, 结合缺陷深度计算公式, 最终实现对复合材料缺陷深度的自动测量。
Abstract
To the composite material, its thermal diffusivity is always changed with layer orientations and material temperatures, which makes it difficult to realize the automatic measurement of defect depth of composite material. To solve this problem, a method was provided, the thermal diffusivity of the detected material could be obtained from infrared thermal imaging series with non-linear fitting based on one-dimensional thermal conduction theoretical model, then combining the formula of depth calculatian, automotic measurement of defect depth of composite material was easy to be achieved.
中图分类号 TN219 TG115.28
所属栏目 科研成果与学术交流
基金项目
收稿日期 2008/6/13
修改稿日期
网络出版日期
作者单位点击查看
备注先明乐(1979-), 女, 讲师, 硕士研究生, 从事飞机修理及无损检测专业的教学及科研工作。
引用该论文: XIAN Ming-Le,XU Zhen-Gao,YANG Xiao-Lin. Automotive Measurement for Defect Depth of Composite Material in Infrared Nondestructive Testing[J]. Nondestructive Testing, 2009, 31(6): 460~463
先明乐,徐振高,杨小林. 红外热波检测复合材料时缺陷深度的自动测量[J]. 无损检测, 2009, 31(6): 460~463
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】Lau S K, Almond D P. A quantitative analysis of pulsed video thermography[J]. NDT&E International, 1991, (24): 195-202.
【2】陈祥宝.聚合物基复合材料手册[M].北京: 化学工业出版社, 2004.
【3】Douglas M Bates, Donald G Watts.非线性回归分析及其应用[M].北京: 中国统计出版社, 1997.
【4】Edward B Magrab, Balakumar Balachandran, Keith E Herold. MATLAB原理与工程应用[M].北京: 电子工业出版社, 2006.
【5】张永强, 王伟平, 唐小松, 等.两种纤维增强复合材料与连续激光耦合规律[J].强激光与粒子束, 2007, 19(10): 1599-1602.
【2】陈祥宝.聚合物基复合材料手册[M].北京: 化学工业出版社, 2004.
【3】Douglas M Bates, Donald G Watts.非线性回归分析及其应用[M].北京: 中国统计出版社, 1997.
【4】Edward B Magrab, Balakumar Balachandran, Keith E Herold. MATLAB原理与工程应用[M].北京: 电子工业出版社, 2006.
【5】张永强, 王伟平, 唐小松, 等.两种纤维增强复合材料与连续激光耦合规律[J].强激光与粒子束, 2007, 19(10): 1599-1602.
相关信息