扫一扫 加微信
首页 > 期刊论文 > 论文摘要
国内TOFD检测技术的应用进展
          
Application Progress of TOFD Technique in China

摘    要
自2001年来, TOFD检测技术因其高可靠性、高精度、廉价以及高效的优点, 被广泛地应用于国内的锅炉、压力容器和压力管道的检测中。对TOFD检测技术在国内的应用与发展作详细介绍。分析TOFD检测技术原理的同时, 指出了其优缺点。同超声检测技术相比较, TOFD检测技术更适用于对压力容器、锅炉的检测。最后列举了国内TOFD检测技术在用标准, 并对其发展趋势作了预测。相信, 自主研发的设备及相应关键技术将是国内今后发展的重要方向。
标    签 超声   TOFD检测技术   纵波   缺陷   标准   Ultrasonic   TOFD technique   Longitudinal wave   Defect   Standard  
 
Abstract
With the characteristics of high reliability, high quantitative precision, low cost and high efficiency, the time of flight diffraction (TOFD) technique is widely applied to many aspects such as boiler, pressure vessel and pressure piping inspection in China since 2001. In this paper, the application of TOFD technique in China is introduced and discussed. The principle of TOFD was introduced, in which the advantages and disadvantages were pointed out. Then, the application and the development of the technique are discussed in detail. Compared with other ultrasonic techniques, the TOFD is fit for pressure vessels and boils much more. Finally, the existing standards and development trend of standards about TOFD in China are enumerated. Furthermore, we believe that homemade research on key technique and equipment is the important development direction in future in China.

中图分类号 TG115.28

 
  中国光学期刊网论文下载说明


所属栏目 Selected Excellent Papers of 2009 Far East NDT Forum

基金项目

收稿日期

修改稿日期

网络出版日期

作者单位点击查看

引用该论文: LIU Fu-Jun,DING Shou-Bao,HU Dong-Ming,GUO Xiao-Lian,KONG Shuai. Application Progress of TOFD Technique in China[J]. Nondestructive Testing, 2009, 31(10): 762~768
刘富君,丁守宝,胡东明,郭小联,孔帅. 国内TOFD检测技术的应用进展[J]. 无损检测, 2009, 31(10): 762~768


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】Baskaran G, Balasubramaniam K, Lakshmana Rao C. Shear-wave time of flight diffraction (S-TOFD) technique[J]. NDT&E International,2006,39(6):458-467.
 
【2】Chen Y B. The application of TOFD technique on the large pressure vessel[C] //In The 17th World Conference on Nondestructive Testing, Shanghai:[s.n.],2008.
 
【3】Zhang P, Shen G.T, Jing W.K. The progress of TOFD technique in China[C] //In The 17th World Conference on Nondestructive Testing, Shanghai:[s.n.],2008.
 
【4】Ogilvy J A, Temple J A G. Diffraction of elastic waves by cracks: application to time-of-flight inspection[J]. Ultrasonics,1983,21(6):259-269.
 
【5】Charlesworth J P, Temple J A G. Engineering Applications of Ultrasonic Time of Flight Diffraction[M]. [s.L.]: 2nd ed. Research Studies Press Ltd,2001.
 
【6】Chang Y F, Hsieh C I. Time of flight diffraction imaging for double probe technique[J]. IEEE Trans Ultrason Ferroelectr Frequency Control,2002,49(6):76-83.
 
【7】Li Y. The quantification and image of defects for thin plates by TOFD technique[J]. Nondestructive Testing,2005,29(5):1-5.
 
【8】Li Y. The application of TOFD technique for inspection on the pressure vessels with large wall thickness[J]. Nondestructive Testing,2005,29(4):5-8.
 
【9】ASME code case 2235-9Use of ultrasonic examination in lieu of radiography section Ⅰand section Ⅷ, division 1 & 2[S].
 
【10】Li Y. The application of TOFD technique for inspection on the power station boilers[J]. Nondestructive testing,2004,28(3):6-10.
 
【11】BS 7706: 1993Guide to calibration and setting-up of the ultrasonic time of flight diffraction (TOFD) technique for defect detection[S].
 
【12】ENV583-6: 2000Non-destructive Testing-Ultrasonic Examination-Part 6: Time-of-Flight Diffraction Technique as a Method for Defect Detection and Sizing[S].
 
【13】CEN/TS-14715: 2004Welding-Use of time-of-flight diffraction technique (TOFD) for examination of welds[S].
 
【14】ASTM E2373: 2004Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique[S].
 
【15】NDIS 2423: 2001Measurement Technique of Defect Height using Tip Echo Method[S].
 
【16】NEN 1822: 2005Acceptance criteria for the time-of-flight diffraction inspection technique[S].
 
相关信息
   标题 相关频次
 厚壁压力容器声发射技术声源定位误差分析
 10
 常压储罐综合检测与评价技术
 6
 浅谈GB/T226《钢的低倍组织及缺陷酸蚀检验法》新旧版本的差异
 4
 双层罐底板结构立式储罐泄漏扩散数值模拟及结构优化
 4
 裂纹漏磁场的数值模拟
 3
 纵波直探头垂直入射固体界面产生横波试验
 3
 《儿童口罩技术规范》国家标准要义解析
 2
 1 000 MW中压外缸的超声波检查与缺陷处理
 2
 34CrMo1A钢转子内部缺陷分析
 2
 35CrMnSi高强度钢断面收缩率偏低原因
 2
 4130X钢压扁试验裂纹分析
 2
 45钢卸扣断裂原因分析
 2
 550kV断路器操作机构轴销的断裂原因分析
 2
 660 MW高压加热器接管角焊缝开裂原因分析
 2
 ACVG与CIPS技术在埋地管道防腐蚀评价中的组合应用
 2
 AP1000核电站CA01结构模块的环氧涂层缺陷
 2
 AS2207—2007与GB/T11345—1989标准的比较与分析
 2
 ASTM G34-01(2013)剥落腐蚀试验标准的技术要点
 2
 AZ91D镁合金激光熔凝层的缺陷
 2
 B50A800无取向硅钢板小白点缺陷成因分析
 2
 C62AT货车车轮崩裂分析
 2
 DC51D+AZ热镀铝锌薄板弯曲折痕缺陷的形成原因
 2
 EEC-2008net电磁/超声网络智能检测系统的研制
 2
 EPR核电站反应堆压力容器主螺栓超声检查工艺的仿真技术
 2
 GB/T 228.1—2010中最大力塑性延伸率测量新方法及其验证
 2
 GB/T 228.1—2021主要修改内容的对照与理解
 2
 GB/T 229-2007金属材料夏比摆锤冲击试验方法简介
 2
 GB/T 27664标准中3种时基线性测试方法的对比分析
 2
 GB/T 3323—2005与JB/T 4730.2—2005标准的对比解析
 2
 GB/T 3323—2005与JB/T 4730.2—2005射线检测标准对比分析
 2