The Establishment of NDT Laboratory
摘 要
无损检测实验室主要按照ISO/IEC17025和CNAS-CL01建立, 每个管理人员对标准的理解不同, 导致指导方针的偏差。人员、设备的管理, 体系文档建立以及日常运行管理为实验室建立的要素。通过对四个要素的流程梳理, 为无损检测实验室的建立提供借鉴。
Abstract
NDT lab was built according to ISO/IEC17025 and CNAS-CL01 the guidelines will make some difference due to different understanding of managers. Management of people, equipment, creation of system files and ordinary operations are mainly elements for setting up lab. Via packing up the four elements, this article gives you suggestions for setting up NDT lab.
中图分类号 TG115.28
所属栏目 质量控制与管理
基金项目
收稿日期 2008/8/28
修改稿日期
网络出版日期
作者单位点击查看
备注田安定(1978-), 男, 工程师, 学士, 主要从事实验室管理和无损检测新技术开发等。
引用该论文: TIAN An-Ding,SHI Tian-Ming,ZHUANG Zhi-Quang. The Establishment of NDT Laboratory[J]. Nondestructive Testing, 2009, 31(10): 814~818
田安定,施天敏,庄志强. 无损检测实验室的建立[J]. 无损检测, 2009, 31(10): 814~818
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】国家认证认可监督管理委员会编.实验室资质认定工作指南[M].北京: 中国计量出版社,2007.
相关信息