The Importance of the NDT Technology Schedule Viewing From the Test Results of Two Inspection Methods
摘 要
编制无损检测工艺的目的是检测结果可靠性的重要保证。检测的闸板的基体由1Cr13钢和表面喷焊高CrNi合金两种材料组成, 当分别用磁力检测和渗透检测两种检测工艺进行检测时, 评定结果截然不同。原因是两种检测方法所适用的检测对象有所差异。因此当对新工件进行表面检测时, 应对该工件的生产过程进行详细了解, 由于工件的材质、形状、尺寸及表面状态对操作方法的影响, 建议使用两种表面方法, 互相比对, 以制定出正确的检测工艺。
Abstract
The preparation of non-destructive testing technology is designed to ensure reliable test results. The flashboard matrix was composed of two materials by 1Cr13 steel and CrNi alloy-surface sprayed, when separately in accordance with detected process both the magnetic detection and penetration testing, the evaluation of the results is different. The reason is that the two detection methods apply to different detect object. When detecting the new workpiece surface, we should understand the production process of the new workpiece. Due to the impact of the workpiece matal shape, size and status of the surface, it is suggested to use two ways at the same time and contrast the result, determining the ultimate detection method, formulating the correct detection process.
中图分类号 TG115.28
所属栏目 实践经验
基金项目
收稿日期 2009/2/27
修改稿日期
网络出版日期
作者单位点击查看
备注时明生(1953-), 男, 工程师, 从事特种设备检测工作。
引用该论文: SHI Ming-Sheng,ZHANG Jing-Yu. The Importance of the NDT Technology Schedule Viewing From the Test Results of Two Inspection Methods[J]. Nondestructive Testing, 2009, 31(11): 913
时明生,张靖宇. 从两种检测方法的检验结果看无损检测工艺编制的重要性[J]. 无损检测, 2009, 31(11): 913
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】JB/T 4730.1~4730.6—2005 承压设备无损检测[S].
【2】王晓雷, 主编.承压类特种设备无损检测相关知识[M].北京: 中国劳动社会保障出版社, 2007.
【3】上海锅炉厂技工学校, 主编.马铭刚, 主审.无损检测工艺[M].上海: 上海科技出版社, 1989.
【4】大连工学院, 编写小组.金属学及热处理[M].北京: 科学出版社, 1975.
【5】Baldev Raj, Venkatrman B.浅谈印度无损检测技术[J].无损检测, 2008, 30(10): 679-684.
【2】王晓雷, 主编.承压类特种设备无损检测相关知识[M].北京: 中国劳动社会保障出版社, 2007.
【3】上海锅炉厂技工学校, 主编.马铭刚, 主审.无损检测工艺[M].上海: 上海科技出版社, 1989.
【4】大连工学院, 编写小组.金属学及热处理[M].北京: 科学出版社, 1975.
【5】Baldev Raj, Venkatrman B.浅谈印度无损检测技术[J].无损检测, 2008, 30(10): 679-684.
相关信息