Multiple-View Ultrasonic Imaging Technique for Pipe Welds
摘 要
通过超声C扫描和三视投影成像技术对管道焊缝缺陷进行定性定量评估和诊断分析。研究与应用结果表明,采用超声自动扫描多维投影成像方法可以直观地得到焊缝区缺陷的位置、大小、分布和取向等特征信息,使缺陷识别的准确性和检测可靠性明显提高。该项技术已在电力等工业部门管道焊缝的无损检测中得到应用。
Abstract
A new nondestructive testing and evaluation (NDT&E) technique by using multiple-view ultrasonic imaging based on mobile automated scanning system for pipe welds in-service was described. Ultrasonic C-scan and three-dimensional P-scan were established to evaluation and diagnosis of defects in pipe welds. The results presented showed that the characteristics of defect in weld, for examples, location, distribution and orientation and size of defects and so on, were be exhibited well by employing the approach. It offered an effective instrument for improving NDT&E detectable probability and reliability of finding defects. The developed multiple-view ultrasonic imaging technique had been applicated in NDT&E of pipe welds in steam power industry so far.
中图分类号 TG115.28
所属栏目 科研成果与学术交流
基金项目 国家自然科学基金资助项目(60572099)
收稿日期 2007/1/23
修改稿日期
网络出版日期
作者单位点击查看
备注刘松平(1962-),男,俄罗斯莫斯科国立大学理学博士,研究员,全国无损检测学会常务理事,《无损检测》副主编,主要从事材料及其结构的无损检测技术研究与开发。
引用该论文: LIU Song-Ping,LIU Fei-Fei,ZHANG Bing-Fa,WANG Rui-Chuan,LI Le-Gang,GUAN Hong-Guang. Multiple-View Ultrasonic Imaging Technique for Pipe Welds[J]. Nondestructive Testing, 2008, 30(2): 77~80
刘松平,刘菲菲,张丙法,王瑞川,李乐刚,关洪光. 管道焊缝超声多维成像检测技术[J]. 无损检测, 2008, 30(2): 77~80
被引情况:
【1】应烨军,刘松平, "熔焊焊缝超声扫描成像检测",无损检测 35, 23-28(2013)
【2】陈渊,马宏伟, "煤矿液压缸环焊缝缺陷超声成像检测系统的研制",无损检测 31, 715-718(2009)
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】Baldev Raj C V, Jayakumar Subramanian T. Non-destructive test of welds[M]. Alpha Science International Ltd,2000.
【2】Raad de J A, Dijkstra F H. Mechanized ultrasonic testing on girth welds during pipeline construction[J]. Materials Evaluation,1997,55(7):890-895.
【3】Ditchburn R J, Burke S K, Scala C M. NDT of welds: state of the art[J]. NDT&E International,1999,29(2):111-117.
【4】Baldev Raj, Subramanian C V. Nondestructive testing of welds[J]. Materials Evaluation,1999,57(12):1251-1254.
【5】Stuart Kleven. Ultrasonic inspection of explosion welded titanium clad plate[J]. Materials Evaluation,1996,54(5):557-560.
【6】Subramanian C V, Thavasimuthu M, Rajagopalan C, et al. Ultrasonic test procedure for evaluating fuel clad endcap weld joints of PHWRs[J]. Materials Evaluation,1995,53(11):1290-1295.
【7】刘松平,陈积懋,郭恩明.先进的超声手动扫描成像检测技术[J].无损检测,1997,19(6):151-153.
【2】Raad de J A, Dijkstra F H. Mechanized ultrasonic testing on girth welds during pipeline construction[J]. Materials Evaluation,1997,55(7):890-895.
【3】Ditchburn R J, Burke S K, Scala C M. NDT of welds: state of the art[J]. NDT&E International,1999,29(2):111-117.
【4】Baldev Raj, Subramanian C V. Nondestructive testing of welds[J]. Materials Evaluation,1999,57(12):1251-1254.
【5】Stuart Kleven. Ultrasonic inspection of explosion welded titanium clad plate[J]. Materials Evaluation,1996,54(5):557-560.
【6】Subramanian C V, Thavasimuthu M, Rajagopalan C, et al. Ultrasonic test procedure for evaluating fuel clad endcap weld joints of PHWRs[J]. Materials Evaluation,1995,53(11):1290-1295.
【7】刘松平,陈积懋,郭恩明.先进的超声手动扫描成像检测技术[J].无损检测,1997,19(6):151-153.
相关信息