Fracture Analysis on the Ball Stud of the Truck’s Tie Rod
摘 要
某卡车转向横拉杆球头销装车使用后立即发生断裂,对其进行了理化检验和模拟试验。结果表明: 失效球头销装车前其颈部就已存在很深的初始裂纹,这是导致其装车使用后立即发生过载断裂的直接原因; 球头销颈部的初始裂纹产生在棒料冷拔阶段。
Abstract
The fracture of ball stud of the truck’s tie rod happened immediately after use and the fracture reason was analyzed by physical and chemical test and simulated experiment. The results indicate that the immediate fracture cause was that there was a critical original crack on the neck area of the ball stud,and the original crack was caused during the bar stock’s cold-drawing process.
中图分类号 TB115
所属栏目 质量控制与失效分析
基金项目
收稿日期 2009/7/3
修改稿日期
网络出版日期
作者单位点击查看
备注杨 帆(1982-),男,工程师。
引用该论文: YANG Fan,ZHANG Mei,FENG Ji-jun,HUANG Wen-zhang. Fracture Analysis on the Ball Stud of the Truck’s Tie Rod[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2010, 46(2): 125~127
杨 帆,张 梅,冯继军,黄文长. 卡车转向横拉杆球头销断裂分析[J]. 理化检验-物理分册, 2010, 46(2): 125~127
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张栋,钟培道,陶春虎,等. 失效分析[M]. 北京: 国防工业出版社,2008.
相关信息