Analysis of Skin Rising on Cold-rolled Q195L Strip Steel Surface
摘 要
通过宏观检验、化学成分分析、金相检验和能谱分析等手段对冷轧Q195L带钢表面翘皮缺陷进行分析。结果表明: 钢中存在的多种非金属夹杂物、氧化铁皮和保护渣是引起带钢翘皮的主要原因。
Abstract
The skin rising flaws on the surface of the cold-rolled Q195L strip steel were analyzed by means of macroscopic examination,chemical composition analysis,metallographic examination and energy spectrum analysis. The results showed that many kinds of non-metallic inclusions and iron scale and slag in the steel were the main reasons led to the skin rising.
中图分类号 TG335.5+6
所属栏目 质量控制与失效分析
基金项目
收稿日期 2009/3/31
修改稿日期
网络出版日期
作者单位点击查看
备注张亚军(1979-),男,助理工程师,学士。
引用该论文: ZHANG Ya-jun,WU Yan-jie,GAO Han-lei. Analysis of Skin Rising on Cold-rolled Q195L Strip Steel Surface[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2009, 45(9): 578~579
张亚军,吴艳杰,高寒蕾. 冷轧Q195L带钢表面翘皮缺陷分析[J]. 理化检验-物理分册, 2009, 45(9): 578~579
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】徐鹤贤.冷轧常见缺陷知识问答[J].特钢技术,2007(2): 65-66.
【2】魏烈省. 冷轧钢带表面缺陷分析[J]. 钢铁, 2006,41(2):386-388.
【3】许俊贻,张雪松,支建华. 冷轧65Mn优质带钢表面起皮分析[J].安徽工业大学学报,2001,18(7): 217-220.
【2】魏烈省. 冷轧钢带表面缺陷分析[J]. 钢铁, 2006,41(2):386-388.
【3】许俊贻,张雪松,支建华. 冷轧65Mn优质带钢表面起皮分析[J].安徽工业大学学报,2001,18(7): 217-220.
相关信息