搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
钒-钛微合金化钢焊接热影响区晶内铁素体与夹杂物的界面关系
          
THE INTER-PHASE BOUNDARY OF INTRA-GRANULAR FERRITE AND INCLUSION IN WELDING HEAT AFFECTED ZONE OF VANADIUM AND TITANIUM MICRO-ALLOYED STEEL

摘    要
采用聚焦离子束方法制备试样,利用最高加速电压为1 300 kV的高分辨电镜观察钒-钛微合金化钢100 kJ/cm大线能量热模拟焊接热影响区,对作为晶内铁素体形核核心的夹杂物形貌与结构及夹杂物与晶内铁素体界面关系进行了研究。结果表明,晶内铁素体在MnS+V(C,N)复合夹杂物相上形核析出,夹杂物和晶内铁素体存在确定的晶体学位向关系。
标    签 热影响区   晶内铁素体   夹杂物   相界   Heat affected zone   Intra-granular ferrite   Inclusion   Inter-phase boundary  
 
Abstract
The morphology and structure of inclusions as nuclei of intra-granular ferrite,inter-phase boundary of inclusion and intra-granular ferrite in heat affected zone of 100 kJ/cm large heat input simulated welding of vanadium and titanium micro-alloyed steel was studied by using a super high resolution electron microscopy (HREM) with a maximal accelerated voltage of 1 300 kV,and the sample was processed by focus ion beam. It was found that intra-granular ferrite nucleated on MnS+V(C,N) composite inclusions,and there was certain crystallography lattice relationship between inclusion and intra-granular ferrite.

中图分类号 TB303

 
  中国光学期刊网论文下载说明


所属栏目 试验与研究

基金项目

收稿日期 2006/11/3

修改稿日期

网络出版日期

作者单位点击查看

备注张莉芹(1972-),女,博士。

引用该论文: ZHANG Li-qin,YUAN Ze-xi,BU Yong. THE INTER-PHASE BOUNDARY OF INTRA-GRANULAR FERRITE AND INCLUSION IN WELDING HEAT AFFECTED ZONE OF VANADIUM AND TITANIUM MICRO-ALLOYED STEEL[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2007, 43(8): 379~381
张莉芹,袁泽喜,卜 勇. 钒-钛微合金化钢焊接热影响区晶内铁素体与夹杂物的界面关系[J]. 理化检验-物理分册, 2007, 43(8): 379~381


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】Maki T,Furohara T. Kinetics and crystallography of intragranular ferrite formed on MnS+V(C,N) complex precipitate in austenite[J]. Iron and Steel Supplement,2005,40:16-22.
 
【2】Furuhara T,Yamaguchi J,Sugita N,et al. Nucleation of Proeutectoid Ferrite on Complex Precipitates in Austenite[J]. ISIJ International,2003,43(10):1630-1639.
 
【3】Furuhara T,Shinyoshi T,Miyamoto G,et al. Multiphase Crystallography in the Nucleation of Intragranular Ferrite on MnS+V(C,N) Complex Precipitate in Austenite[J]. ISIJ International,2003,43(12):2028–2037.
 
【4】Fusao Ishikawa,Toshihiko Takahashi,Tatsurou Ochi. Intragranular ferrite nucleation in medium-carbon vanadium steels[J]. Metallurgical and Materials Transactions,1994,25A(5):929-936.
 
【5】YIN Gui-quan,YANG Cai-fu,WANG shi-jun. Second phase particles and intragranular ferrite nucleation in microalloyed V-N steels[J]. Iron and Steel Supplement,2005,40:315-319.
 
【6】Fusao Ishikawa,Toshihiko Takahashi. The Formation of Intragranular Ferrite Plates in Medium-carbon Steels for Hot-forging and Its Effect on the toughness[J]. ISIJ International,1995,35(9):1128-1133.
 
【7】Hyung-Ha Jin,Hu-Chul Lee. Acicular Ferrite Microstructure under Isothermal Transformation in Low Carbon Steel containing V and Mo[J]. Iron and Steel Supplement,2005,40:719-722.
 
【8】Miyamoto G,Shinyoshi T,Yamaguchi J,et al. Crystallography of intragranular ferrite formed on (MnS+V(C,N)) complex precipitate in austenite[J]. Scripta Materialia,2003,48:371-377.
 
【9】古原忠.鉄鋼材料における界面構造とエネルギー[J].鉄と鋼,2003,89(5):497-509.
 
相关信息
   标题 相关频次
 钼、铌含量对耐火结构钢组织与性能的影响
 3
 0Cr13铁素体不锈钢丝在模压过程中开裂的原因
 2
 0Cr18Ni9不锈钢热轧卷分层原因分析
 2
 1000MW超超临界机组C12A堵板阀裂纹成因分析
 2
 13Cr钢防砂工具转换接头开裂原因分析
 2
 2.25Cr1Mo钢中的夹杂物和晶粒度
 2
 2.25CrMoV钢于夹杂物和晶界处开裂低周疲劳裂纹扩展的原位观测
 2
 20CrMnTi齿轮钢铸坯缺陷引起的开裂分析
 2
 20SiMn钢水轮机主轴超声波探伤不合格原因分析
 2
 27CrMoTi钢套管螺纹表面裂纹成因分析
 2
 304L不锈钢管失效分析
 2
 304奥氏体不锈钢管焊接接头开裂原因
 2
 304不锈钢编码器小轴断裂原因
 2
 304不锈钢表面锈蚀原因分析
 2
 316L奥氏体不锈钢稳定辊轴头断裂的原因
 2
 316L钢内衬复合管焊接接头的耐点蚀性能
 2
 32CrMo4钢射孔枪管探伤不合格原因分析
 2
 37Mn5钢管内壁起皮原因分析
 2
 37Mn钢无缝气瓶局部位置厚度异常原因
 2
 40Cr钢汽车半轴断裂原因分析
 2
 40Cr钢油缸断裂原因
 2
 4130钢锻件超声检测不合格原因
 2
 42CrMo4钢断口蓝化效果的影响因素
 2
 45钢棒料冲击功偏低的原因分析
 2
 5083铝合金支架开裂失效分析
 2
 55CrSi钢气门弹簧断裂原因分析
 2
 70 mm厚度Q345E钢板低温冲击吸收功不合格原因分析
 2
 700 MPa级热轧高强钢在剪切加工过程中分层开裂的原因
 2
 718H钢与40Cr13钢中心疏松的原因分析及改进措施
 2
 B7螺杆上的螺纹剥落原因分析
 2