搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
特种设备无损检测人员实践培训的思考
          
Think About Nondestructive Testing Personnel Practical Training of Special Equipment

摘    要
特种设备无损检测人员的资格培训十分重要。在以往的培训中理论培训效果较好, 实践培训存在一定的差距, 满足不了社会的需求。为了提高实践培训的效果, 应当丰富各专业级别实践培训的内容, 编制相应的实践培训作业指导书, 增加培训老师, 提高他们培训水平, 合理安排培训课程, 确保实践培训时间满足要求, 增加设备和器材的投入, 制作统一规范的缺陷试件, 通过提升特种设备无损检测人员实践培训的水平, 使培训机构更加贴近社会需求, 为特种设备的安全运行、保障国家和人民生命财产的安全做出应有的贡献。
标    签 特种设备   人员资格   实践操作培训   Special equipment   Personnel qualification   Practical operation training  
 
Abstract
Nondestructive testing personnel qualification training of special equipment is extremely important, It is better in previous theoretical training, but there is a gap in practical training, and it can not meet the needs of the community. In order to increase the effect of practical training, we should enrich the content of practical training at different levels, draw up operating instructions of practical training, increase training teachers and raise their level of training. At the same time, we should arrange for training courses legitimately in order to ensure the practical training time, and increase investment in equipment and material, and produce a unified standard of defect specimens. Through enhancing the level of practical training, our training institutions will be closer to the needs of society, and do our due contribution for the safe operation of special equipment, protect the safety of national and peoples lives and property.

中图分类号 TG115.28

 
  中国光学期刊网论文下载说明


所属栏目 2010年远东无损检测论坛论文精选

基金项目

收稿日期

修改稿日期

网络出版日期

作者单位点击查看

备注强天鹏(1951-), 男, 研究员, 多年从事无损检测科研、工程应用、人员技术培训和资格考核工作。

引用该论文: QIANG Tian-Peng,GU Yan-Ru,XIE Shuang-Kou. Think About Nondestructive Testing Personnel Practical Training of Special Equipment[J]. Nondestructive Testing, 2010, 32(8): 605~607
强天鹏,顾訚如,谢双扣. 特种设备无损检测人员实践培训的思考[J]. 无损检测, 2010, 32(8): 605~607


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter
相关信息
   标题 相关频次
 “探空飞梭”游艺机钢丝绳在线检测和评估的解决方案
 2
 CR技术与胶片照相技术的特性对比试验
 2
 GB/T 3323—2005与JB/T 4730.2—2005标准的对比解析
 2
 GB/T 3323-2005与JB/T 4730.2-2005标准的对比解析(续)
 2
 GB/T 3323—2005与JB/T 4730.2—2005标准的对比解析(续)
 2
 JB/T 4730—2005《承压设备无损检测》答疑——磁粉检测部分(Ⅰ)
 2
 JB/T 4730—2005《承压设备无损检测》答疑——磁粉检测部分(Ⅱ)
 2
 JB/T 4730—2005《承压设备无损检测》答疑——磁粉检测部分(Ⅲ)
 2
 JB/T 4730—2005《承压设备无损检测》答疑——磁粉检测部分(Ⅳ)
 2
 JB/T 4730—2005《承压设备无损检测》答疑——射线检测部分(Ⅰ)
 2
 JB/T 4730—2005《承压设备无损检测》答疑——射线检测部分(Ⅱ)
 2
 JB/T 4730—2005《承压设备无损检测》答疑——射线检测部分(Ⅲ)
 2
 TOFD技术的检测盲区计算和分析
 2
 场(厂)内机动车辆无损检测技术
 2
 超声相控阵角度偏转极限测试方法探讨
 2
 超声相控阵系统的聚焦特性研究
 2
 从ISO17636-2标准看数字射线检测技术的发展趋势
 2
 对接焊缝相控阵超声检测可靠性的CIVA仿真与试验
 2
 工业数字射线检测(CR与DR)的实验室能力认可
 2
 关于JB/T4730.2—2005射线检测部分标准化修订内容的思考
 2
 管子-管板角焊缝射线照相技术的进展
 2
 基于高斯混合-隐马尔可夫模型的特种设备敲击检测
 2
 计算机射线照相(CR)技术参数对灵敏度的影响
 2
 加氢反应器法兰密封槽裂纹的检测和定量
 2
 加楔块超声相控阵的聚焦特性测试
 2
 胶片射线检测与数字射线检测的焊接缺陷检出能力比较
 2
 目视检测技术在特种设备检验中的应用
 2
 声发射检测在超高压水晶釜安全评估中的应用
 2
 特种设备无损检测技术综述
 2
 特种设备用钢丝绳断裂的原因
 2