Electrochemical Behavior of Pt/Ti Electrodes Prepared by Explosive Combination Method
摘 要
Pt/Ti电极作为一种优良的耐腐蚀复合材料, 被广泛应用于海洋工业、氯碱工业及电子工业。根据铂层厚度及性能的差异, 电镀与爆炸复合工艺均被广泛应用于Pt/Ti复合电极的工业化生产。采用SEM对爆炸复合Pt/Ti电极的表面及扩散层形貌进行了研究; 采用PARSTAT4000型电化学分析仪对爆炸复合Pt/Ti电极试样的极化曲线(Tafel 曲线)及循环伏安特性曲线(CV 曲线)进行了测试, 对比了电镀工艺Pt/Ti电极的电化学性能。结果表明,Pt/Ti复合电极的表面形貌对其电化学活性具有重要影响, 爆炸复合工艺制备的Pt/Ti电极表面十分致密, 沿着轧制方向具有明显的加工流线, 抗腐蚀性能较佳; 电镀工艺制备的Pt/Ti复合电极表面铂层呈颗粒状分布, 增大了与溶液的实际接触面积, 表面活性较好。
Abstract
Pt/Ti electrodes as an excellent anti-corrosion complex material are wildly used for marine and underground cathodic protection, chemistry industry and electronic industry. According to the thickness and morphology of Pt layer, explosive combination and electroplating methods are used for fabricating Pt/Ti electrodes. The electrochemical properties of Pt/Ti electrodes prepared by explosive combination method were investigated, the morphology and interface were studied by scanning electron microscopy. The results show that the morphology of Pt layer played an important role in the electrochemical properties of Pt/Ti electrodes. The surface of Pt/Ti electrode prepared by explosive combination method was dense. There were obvious machining lines along the rolling direction on the surface of Pt/Ti electrodes prepared by explosive combination method, which improved the self-corrosion potentials. But Pt layer on the particle suface of Pt/Ti electrode prepared by electroplating method distributed as particles and owed relatively good surface activity.
中图分类号 TG171 DOI 10.11973/fsyfh-201512006
所属栏目 试验研究
基金项目
收稿日期 2014/12/17
修改稿日期
网络出版日期
作者单位点击查看
备注韩吉庆(1974-),高级工程师,硕士,从事稀贵金属深加工方面的研究,
引用该论文: HAN Ji-qing,XING Jian,ZHAO Tao,MA Xiao-long. Electrochemical Behavior of Pt/Ti Electrodes Prepared by Explosive Combination Method[J]. Corrosion & Protection, 2015, 36(12): 1143
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】WALKIDEN G W,SC B. Platinum in anodes cathodic protection applications-part I[J]. Corrosion Technology,1962:14-16.
【2】张建华. 镀铂钛电极的研究[J]. 广东有色金属学报,2001,16(2):35,108-111.
【3】张玉萍, 鞠鹤, 武宏让. 铂复合电极研究进展[J]. 表面技术, 2005,34(5):16-18.
【4】PREISER H S. Cathodic protection applications using platinum anodes[J]. Platinum Metals Rev,1959,3(2):38-43.
【5】张玉萍, 鞠鹤, 武宏让, 等. 铂钛不溶性阳极研制[J]. 表面技术,2002,31(4):37-39.
【6】丁昊冬. 碱性镀浴中钛基体化学镀铂的研究[J]. 材料保护,2008,41(5):29-32.
【7】IGUMENOV I K,GELFOND N V,GALKIN P S,et al. Corrosion testing of platinum metals CVD coated titanium anodes in seawater-simulated solution[J]. Desalination,2001,136:273-280.
【8】潘建跃, 陶自春, 罗启富. 纳米级镀铂的钛阳极研究[J]. 机械工程材料,2003,27(12):23-25.
【9】杨扬, 李正华, 吕培成, 等. 爆炸复合界面温度场模型及应用[J]. 稀有金属材料与工程,2000,29(3):161-163.
【10】JIANG Q,MIU Q,TONG F,et al. Electrochemical corrosion behavior of arc sprayed Al-Zn-Si-RE coatings on mild steel in 3.5% NaCl solution[J]. Transaction of Nonferrous Metals Society of China,2014,24(8):2712-2722.
【11】FUMIHIRO K,YU K,AKIRA N,et al. Electrochemical corrosion of platinum electrode in concentrated sulfuric acid[J]. Journal of Power Sources,2007,172:698-703.
【2】张建华. 镀铂钛电极的研究[J]. 广东有色金属学报,2001,16(2):35,108-111.
【3】张玉萍, 鞠鹤, 武宏让. 铂复合电极研究进展[J]. 表面技术, 2005,34(5):16-18.
【4】PREISER H S. Cathodic protection applications using platinum anodes[J]. Platinum Metals Rev,1959,3(2):38-43.
【5】张玉萍, 鞠鹤, 武宏让, 等. 铂钛不溶性阳极研制[J]. 表面技术,2002,31(4):37-39.
【6】丁昊冬. 碱性镀浴中钛基体化学镀铂的研究[J]. 材料保护,2008,41(5):29-32.
【7】IGUMENOV I K,GELFOND N V,GALKIN P S,et al. Corrosion testing of platinum metals CVD coated titanium anodes in seawater-simulated solution[J]. Desalination,2001,136:273-280.
【8】潘建跃, 陶自春, 罗启富. 纳米级镀铂的钛阳极研究[J]. 机械工程材料,2003,27(12):23-25.
【9】杨扬, 李正华, 吕培成, 等. 爆炸复合界面温度场模型及应用[J]. 稀有金属材料与工程,2000,29(3):161-163.
【10】JIANG Q,MIU Q,TONG F,et al. Electrochemical corrosion behavior of arc sprayed Al-Zn-Si-RE coatings on mild steel in 3.5% NaCl solution[J]. Transaction of Nonferrous Metals Society of China,2014,24(8):2712-2722.
【11】FUMIHIRO K,YU K,AKIRA N,et al. Electrochemical corrosion of platinum electrode in concentrated sulfuric acid[J]. Journal of Power Sources,2007,172:698-703.
相关信息