搜索热:失效分析 陶瓷
扫一扫 加微信
首页 > 期刊论文 > 论文摘要
DD9单晶高温合金在800 ℃的高周旋弯疲劳性能
          
Rotary Bending High Cycle Fatigue Properties of DD9 Single Crystal Superalloy at 800 ℃

摘    要
研究了第三代单晶高温合金DD9在800 ℃的高周旋弯疲劳性能, 并用扫描电镜和透射电镜分析了其断口形貌和断裂机制。结果表明: DD9合金在800 ℃的高周旋弯疲劳性能优异; 疲劳裂纹起源于试样表面、亚表面的滑移带、氧化物、显微疏松处, 沿{111}面扩展, 断裂机制为类解理断裂, 断口上有典型的疲劳条带; 断裂后,γ′相的形状没有发生改变, 沿滑移带形成了二次裂纹,位错密度分布不均匀;位错主要在基体通道中通过交滑移扩展运动。
标    签 DD9合金   单晶高温合金   高周旋弯疲劳性能   断裂机制   DD9 alloy   single crystal superalloy   rotary bending high cycle fatigue property   fracture mechanism  
 
Abstract
Rotary bending high cycle fatigue properties of the third generation single crystal superalloy DD9 were investigated at 800 ℃. SEM and TEM were used to study fracture surface morphology and fracture mechanism of the alloy. The results show that the rotary bending high cycle fatigue properties of DD9 alloy were excellent. The fatigue crack initiated slip band, oxide and microporosity at or near the surface. Crack propagated along {111} octahedral slip planes and the fracture mechanism was quasi-cleavage fracture. The γ′ phase still maintained same shape after fracture, the secondary crack formed along the slip band, and dislocation density distributed unevenly. The dislocation moved mainly by cross-slip in substrate channel.

中图分类号 TG132.3   DOI 10.11973/jxgccl201601004

 
  购买该论文  中国光学期刊网论文下载说明


所属栏目 试验研究

基金项目

收稿日期 2014/11/30

修改稿日期 2015/11/2

网络出版日期

作者单位点击查看

备注史振学(1975-), 男, 山东曲阜人, 高级工程师, 博士。

引用该论文: SHI Zhen-xue,WANG Xiao-guang,LIU Shi-zhong,LI Jia-rong. Rotary Bending High Cycle Fatigue Properties of DD9 Single Crystal Superalloy at 800 ℃[J]. Materials for mechancial engineering, 2016, 40(1): 16~19
史振学,王效光,刘世忠,李嘉荣. DD9单晶高温合金在800 ℃的高周旋弯疲劳性能[J]. 机械工程材料, 2016, 40(1): 16~19


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】CARON P, KHAN T. Evolution of Ni-based superalloys for single crystal gas turbine blade applications[J]. Aerospace Science and Technology, 1999,3:513-523.
 
【2】史振学, 李嘉荣, 刘世忠. 一种镍基单晶高温合金组织稳定性[J]. 机械工程材料, 2013, 37(11): 82-86.
 
【3】史振学, 刘世忠, 李嘉荣. 镍基单晶高温合金不同角度晶界在高温氧化过程中的组织演化[J]. 机械工程材料, 2013, 37(12): 75-79.
 
【4】ARGENCE D, VERNAULT C, DESVALLEES Y, et al. MC-NG: A 4′ generation single crystal superalloy for future aeronautical turbine blades and vanes[C]// Superalloys.Warrendale: TMS, 2000: 829-837.
 
【5】WALSTON S, CETEL A, MACKAY R, et al. Joint development of a fourth generation single crystal superalloy [C]// Superalloys. Pennsylvania: TMS, 2004: 15-24.
 
【6】WALSTON W S, O′HARA K, ROSS E W, et al. RenéN6: third generation single crystal superalloy[C]// Superalloys. Warrendale: TMS, 1996: 27-34.
 
【7】李嘉荣, 刘世忠, 史振学, 等. 第三代单晶高温合金[J]. 钢铁研究学报, 2011(增1): 337-340.
 
【8】SHI Z X, LI J R, LIU S Z. Effect of long term aging on microstructure and stress rupture properties of a nickel based single crystal superalloy[J]. Progress in Natural Science: Materials International, 2012,22:426-432.
 
【9】SHI Z X, LI J R, LIU S Z. Influence of withdrawal rate on tensile and stress rupture properties of the single crystal superalloy DD9[J]. Materials Science Forum, 2013,747/748:625-628.
 
【10】WANG X G, LI J R, SHI Z X, et al. Effect of solid solution heat treatment on microstructures of the third generation single crystal superalloy DD9 [J]. Materials Science Forum, 3012, 747/748: 549-558.
 
【11】SHI Z X, LI J R, LIU S Z, et al. Creep properties and microstructure evolution of nickel-based single crystal superalloy at different conditions[J]. Trans Nonferrous Met Soc China, 2014,24:2536-2543.
 
【12】WRIGHT P K, JAIN M, CAMERON D. High cycle fatigue in a single crystal superalloy: time dependence at elevated temperature [C]// Superalloys. Pennsylvania, TMS, 2004: 657-666.
 
【13】LUKAS P, KUNZ L, SVOBODA M. High cycle fatigue of superalloy single crystals at high mean stress [J]. Materials Science and Engineering:A, 2004, 387/389: 505-510.
 
【14】WASSON A J, FUCHS G E. The effect of carbide morphologies on elevated temperature tensile and fatigue behavior of a modified single crystal Ni-base superalloy [C]// Superalloys. Pennsylvania, TMS, 2008: 489-497.
 
【15】SHI Z X, LI J R, LIU S Z, et al. High cycle fatigue behavior of the second generation single crystal superalloy DD6 [J]. Transaction Nonferrous Metal Society of China, 2011, 21: 998-1003.
 
【16】WAN J S, YUE Z F. A low-cycle fatigue life model of nickel-based single crystal superalloys under multiaxial stress state[J]. Materials Science and Engineering: A,2005,392:145-149.
 
【17】史振学, 李嘉荣, 刘世忠, 等. 第二代单晶高温合金DD6的低周疲劳行为[J]. 材料热处理学报, 2011, 32(5): 41-45.
 
【18】黄志伟, 袁福河, 王中光, 等. 铸造镍基高温合金M963的高温低周疲劳行为[J]. 金属学报, 2007, 43(7): 678-682.
 
【19】ZHANG J X, MURAKUMO T, HARADA H. Creep deformation mechanisms in some modern single crystal superalloys[C]// Superalloys. Pennsylvania, TMS, 2004: 189-195.
 
相关信息
   标题 相关频次
 一种镍基单晶高温合金的组织稳定性
 8
 检验腐蚀对镍基单晶高温合金力学性能的影响
 6
 镍基单晶高温合金在高温氧化过程中不同角度晶界显微组织的演化
 6
 新型单晶高温合金长期高温时效后的显微组织和高温拉伸性能
 4
 不同温度下镍基单晶高温合金的低周疲劳性能
 3
 FGH97粉末高温合金的断裂特征
 2
 SiCp粒径及含量对铝基复合材料拉伸性能和断裂机制的影响
 2
 T651态7075铝合金的显微组织与拉伸断裂机制
 2
 Ti-5Al-5Mo-5V-3Cr-1Zr合金α相的析出行为及其对断裂机制的影响
 2
 动态条件下Fe-24Mn-0.5C孪晶诱发塑性钢的断裂机制
 2
 含碳镍基单晶高温合金的再结晶倾向性
 2
 铼含量对第四代镍基单晶高温合金凝固组织的影响
 2
 热等静压对第二代DD6单晶高温合金高温高周疲劳性能的影响
 2
 一种镍基单晶高温合金的热机械疲劳行为
 2
 预热时间对钢轨铝热焊焊缝组织和力学性能的影响
 2
 铸锻复合成形后AZ91镁合金的组织和力学性能
 2
 5754铝合金钨极氩弧焊和搅拌摩擦焊接头的疲劳性能及断裂机理
 1
 980 MPa级低碳贝氏体高强钢MAG焊接接头不同试样的拉伸断裂机理
 1
 DP780高强度钢MAG焊搭接接头的组织和拉剪性能
 1
 TiAl基合金的拉伸疲劳断裂机理
 1
 北京科技大学冯强Acta Materialia:在二代单晶高温合金中通过少量添加Hf和B来改善晶界容限
 1
 钢板表面热浸镀锌层的拉伸断裂机理
 1
 航空用纤维增强树脂基复合材料加筋板的剪切屈曲特性
 1
 回火和冲击试验温度对套管钻井钢冲击韧性及断裂机理的影响
 1
 激光选区熔化成形Al-Si合金高周疲劳性能的研究进展
 1
 热镀锌合金化镀层裂纹的产生与扩展机理
 1
 稀土永磁材料力学性能改善方法及加工方法的研究进展
 1
 系列高效复合防腐蚀融雪剂的研制
 1
 一种新型980 MPa高强钢的低温四点弯曲断裂行为
 1
 用不同方法评估2024-T62铝合金结构件的原始疲劳质量
 1