Influence of Surface Roughness on EMAT Detection of Round Steel
摘 要
介绍了棒材电磁超声探伤仪的结构、功能、主要性能参数以及工作原理, 针对检测过程中发生缺陷误报的情况, 通过试验分析了表面粗糙度对电磁超声检测的影响。结果表明, 棒材表面粗糙度较大是造成误报的直接原因; 要降低误报率, 可采用降低表面粗糙度或降低检测灵敏度的方法。
Abstract
The equipment structure, its function, main performance parameters and basic principles of electromagnetic ultrasonic detector for round steel inspection were introduced. Aiming at false alarm of EMAT detection, the influence of surface roughness was tested and analyzed. Results showed that the surface roughness was the direct cause of false alarm. In order to reduce the rate of false alarm, the method of reducing surface roughness and detection sensitivity should be taken.
中图分类号 TG115.28 DOI 10.11973/wsjc201602011
所属栏目 表面状态对检测的影响专题
基金项目
收稿日期 2015/2/2
修改稿日期
网络出版日期
作者单位点击查看
备注闻小德(1985-), 男, 工程师, 大学本科, 主要从事无损检测技术管理工作。
引用该论文: WEN Xiao-de. Influence of Surface Roughness on EMAT Detection of Round Steel[J]. Nondestructive Testing, 2016, 38(2): 45~47
闻小德. 表面粗糙度对棒材电磁超声检测的影响[J]. 无损检测, 2016, 38(2): 45~47
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】李振才.电磁超声技术(EMAT)的发展与应用[J].无损探伤,2006,30(6):13-14.
【2】陈鹏,韩德来,蔡强富,等.电磁超声检测技术的研究进展[J].国外电子测量技术,2012,31(11):18-21.
【3】张勇,陈强,孙振国,等.用于无损检测的电磁超声换能器研究进展[J].无损检测,2004,26(6):275-279.
【4】马小怀.钛合金超声波检测中杂波产生原因分析[J].无损检测,2006,28(12):649-651.
【5】夏纪真.工业超声波无损检测技术[M].广州:广东科技出版社,2012.
【2】陈鹏,韩德来,蔡强富,等.电磁超声检测技术的研究进展[J].国外电子测量技术,2012,31(11):18-21.
【3】张勇,陈强,孙振国,等.用于无损检测的电磁超声换能器研究进展[J].无损检测,2004,26(6):275-279.
【4】马小怀.钛合金超声波检测中杂波产生原因分析[J].无损检测,2006,28(12):649-651.
【5】夏纪真.工业超声波无损检测技术[M].广州:广东科技出版社,2012.
相关信息