Optical Measurement and Optical-magnetic Composite Detecting Method of Specimen with Rough Surface
摘 要
在电、磁、声无损检测中,被检工件表面状态对检测结果的精确评判有较大影响。为提高电磁无损检测的精度,提出了光磁复合无损检测方法,将基于线结构光表面粗糙度和形貌的自动测量数据以及漏磁检测数据进行融合,以消除表面状态对检测评判的影响。试验结果表明,对于表面粗糙的工件,结合光学表面测量结果可在一定程度上提高漏磁检测信号的信噪比,进而提升微细裂纹的检测能力;当工件内外表面均存在缺陷时,光磁复合检测方法可有效实现内外伤的区分。
Abstract
In the electrical, magnetic and acoustic nondestructive testing (NDT), the surface state has great influence on the accurate discrimination of the testing results. In order to eliminate the influence of surface state on the discrimination and increase the accuracy of the electromagnetic NDT, the optical-magnetic composite detecting method was proposed in this paper based on the data fusion of the linear structured light surface automatic measurement and the magnetic flux leakage (MFL) testing results. The experiment results show that, the SNR of MFL testing signal is improved with the combination of the optical measurement results when the surface of the workpiece is rough, thereby improving the detecting ability of the tiny cracks. And the optical-magnetic composite NDT method is effective in the discrimination of the internal and external defects according to the results.
中图分类号 TG115.28 DOI 10.11973/wsjc201604014
所属栏目 表面状态对检测的影响专题
基金项目 国家自然科学基金资助项目(51475194,51275193)
收稿日期 2016/1/7
修改稿日期
网络出版日期
作者单位点击查看
联系人作者康宜华(yhkang@263.net)
备注杨芸(1990-),女,博士研究生,研究方向为无损检测技术及仪器。
引用该论文: YANG Yun,ZHANG Ji-kai,PU Hai-ming,KANG Yi-hua. Optical Measurement and Optical-magnetic Composite Detecting Method of Specimen with Rough Surface[J]. Nondestructive Testing, 2016, 38(4): 54~58
杨芸,张继楷,濮海明,康宜华. 粗糙表面试件的光学测量及光磁复合检测方法[J]. 无损检测, 2016, 38(4): 54~58
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】康宜华,武新军.数字化磁性无损检测技术[M]. 北京:机械工业出版社,2006.
【2】于敏. 锈蚀铁磁材料表面的极微裂纹信号的聚类与提取[J]. 中国电机工程学报,2004:145-149.
【3】于敏, 胡红利, 孔忻,等. 粗糙表面铁磁性棒材微裂纹检测与信号处理技术研究[J]. 西安交通大学学报. 2001,35(8):780-784.
【4】王鹏. 线结构光三维自动扫描系统关键技术的研究[D]. 天津:天津大学, 2008.
【5】吴庆华. 基于线结构光扫描的三维表面裂纹在线检测的理论与应用研究[D]. 武汉:华中科技大学, 2013.
【2】于敏. 锈蚀铁磁材料表面的极微裂纹信号的聚类与提取[J]. 中国电机工程学报,2004:145-149.
【3】于敏, 胡红利, 孔忻,等. 粗糙表面铁磁性棒材微裂纹检测与信号处理技术研究[J]. 西安交通大学学报. 2001,35(8):780-784.
【4】王鹏. 线结构光三维自动扫描系统关键技术的研究[D]. 天津:天津大学, 2008.
【5】吴庆华. 基于线结构光扫描的三维表面裂纹在线检测的理论与应用研究[D]. 武汉:华中科技大学, 2013.
相关信息