Ultrasonic Imaging Detection of the Composite Layer Due to Titanium Steel Explosive Welding
摘 要
为了提高爆炸焊接的质量,需要对爆炸焊工件焊层处的结合情况有一个较为全面的了解。以钛-钢爆炸焊试件做为试验对象,利用超声成像扫描研究爆炸焊工件复合层处成像波纹间的距离和波纹的高度两个参量,来评价爆炸焊接的质量。结果表明:可以利用工件底面的脉冲回波和结合界面回波的相对变化、接收回波的异常来判断爆炸焊接质量,该方法对无损评价爆炸焊接质量具有很好的指导意义。
Abstract
In order to improve the quality of explosive welding, a more comprehensive understanding of the explosive welding layer combination is needed. Previous studies on the quality of the explosive welding were almost fully undertaken by means of transmission electron microscopy (TEM), with the help of which the binding to the surface of the material at the tissue was observed to determine whether the combination was good or bad. Although this method is accurate, it however is a destructive test, so it does not apply to the actual work of the 100% detection. In this paper, titanium steel explosive welding specimen was used as the research object, and ultrasonic imaging was employed to study the quality of explosive welding. The height of the ripple and the distance of the ripples were used as the two parameters for the evaluation of the quality of explosive welding.
中图分类号 TG115.28 DOI 10.11973/wsjc201607009
所属栏目 试验研究
基金项目
收稿日期 2015/10/23
修改稿日期
网络出版日期
作者单位点击查看
联系人作者万刚(catsbee@163.com)
备注万刚(1990-),男,硕士研究生,主要从事无损检测技术研究工作。
引用该论文: WAN Gang,WU Wei,WANG Ru,WU Guan-hua,WU Yu. Ultrasonic Imaging Detection of the Composite Layer Due to Titanium Steel Explosive Welding[J]. Nondestructive Testing, 2016, 38(7): 36~39
万刚,吴伟,王茹,邬冠华,吴宇. 钛-钢爆炸焊复合层的超声成像检测[J]. 无损检测, 2016, 38(7): 36~39
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】张文毓.爆炸焊接技术的应用现状与展望[J].工程爆破,2009(4):86-89.
【2】马志新.钛-铝复合板的制备工艺研究及界面组织和性能分析[D].北京:北京有色金属研究总院,2004.
【3】范慧卿.FCB自动焊终端裂纹超声波检测方法的研究[D].大连:大连理工大学,2008.
【4】李建文,徐彦霖,王增勇,等.超声底波成像方法研究[J].无损检测,2005,27(9):457-459.
【5】郑哲敏,谈庆明.爆炸复合界面波的形成机理[J].力学学报,1989(2):129-139.
【6】王耀华.金属板材爆炸焊接研究与实践[M].北京: 国防工业出版社,2007:23-25.
【2】马志新.钛-铝复合板的制备工艺研究及界面组织和性能分析[D].北京:北京有色金属研究总院,2004.
【3】范慧卿.FCB自动焊终端裂纹超声波检测方法的研究[D].大连:大连理工大学,2008.
【4】李建文,徐彦霖,王增勇,等.超声底波成像方法研究[J].无损检测,2005,27(9):457-459.
【5】郑哲敏,谈庆明.爆炸复合界面波的形成机理[J].力学学报,1989(2):129-139.
【6】王耀华.金属板材爆炸焊接研究与实践[M].北京: 国防工业出版社,2007:23-25.
相关信息