扫一扫 加微信
首页 > 期刊论文 > 论文摘要
金属磁记忆检测技术的兴起与发展
          
The Rise and Development of Metal Magnetic Memory Testing Technology

摘    要
金属磁记忆检测技术可以用来检测铁磁金属构件上以应力集中为特征的危险区域, 其可对受载铁磁构件的损伤进行早期诊断, 预防灾难事故的发生。概述了金属磁记忆检测的原理和特点, 分析了磁记忆检测的国内外研究现状, 介绍了关于应力集中定量问题的几种计算算法和目前出现的几种新型磁记忆检测仪器和系统, 并提出了目前磁记忆检测研究中亟待解决的关键性问题, 以及磁记忆检测技术的未来发展方向。
标    签 磁记忆检测   铁磁构件   应力集中   早期诊断   Magnetic memory testing   Ferromagnetic member   Stress concentration   Early diagnosis  
 
Abstract
Metal magnetic memory testing technology can detect the danger zone characterized by the stress concentration in a ferromagnetic metal member. It can thus implement an early diagnosis of the damage for the ferromagnetic member and prevent disaster accidents. This article outlines the metal magnetic memory testing principles and characteristics, analyzes the research status of magnetic memory testing, introduces a quantitative problem of stress concentration on several computational algorithms and several new types of magnetic memory testing instruments and systems currently emerging, and presents the current research in magnetic memory testing key issues to be studied and the magnetic memory testing technology in the future development direction.

中图分类号 TG115.28   DOI 10.11973/wsjc201611002

 
  中国光学期刊网论文下载说明


所属栏目 磁记忆检测技术应用与发展专题

基金项目

收稿日期 2016/1/7

修改稿日期

网络出版日期

作者单位点击查看


备注任吉林(1945-), 男, 教授, 主要从事电磁无损检测技术的研究工作。

引用该论文: REN Ji-lin,LIU Hai-chao,SONG Kai. The Rise and Development of Metal Magnetic Memory Testing Technology[J]. Nondestructive Testing, 2016, 38(11): 7~15
任吉林,刘海朝,宋凯. 金属磁记忆检测技术的兴起与发展[J]. 无损检测, 2016, 38(11): 7~15


论文评价
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
分享论文
分享到新浪微博 分享到腾讯微博 分享到人人网 分享到 Google Reader 分享到百度搜藏分享到Twitter

参考文献
【1】DOUBOV A A.Diagnostics of boiler tubes with usage of metal magnetic memory [M]. Moscow: Energoatomizdat, 1995.
 
【2】DOUBOV A A.Study of metal properties using magnetic memory method [C]//Proceedings of the 7th European Conference on Nondestructive Testing.Copenhagen: [s.n], 1998: 920-927.
 
【3】DOUBOV A A.The method of metal magnetic memory-The new trend in engineering diagnostics[J].Welding in the World, 2005, 49(9): 314-319.
 
【4】JILE D C.Theory of the magnetomechanical effeet [J]. Journal of Physics D-Applied physiecs, 1995, 28(8): 1537-1546.
 
【5】DEVIN M K, JILE D C. Composition dependence of the magnetomechanical effect and magnetostriction[J]. IEEE. Trans. on Magnetics, 1996, 32(5): 4740-4742.
 
【6】SABLIK M J, JILE D C. Modeling effects of varying torsion in magnetized steel[J].IEEE Transactions on Magnetics, 2000, 36(5): 3248-3250.
 
【7】CHEN Y H, JILE D C. Magnetomechanical effeets under torsional strain in ron cobalt and nickel[J]. Journal of Magnetism and Magnetic Materials, 2001, 236: 131-138.
 
【8】ZHU B, LO C C H, LEE S J, et al. Micromagnetic modeling of the effects of stress on magnetic properties[J]. Journal of Applied Physics, 2001, 89(11): 7009-7011.
 
【9】SUKEGAWA T.Magnetic nondestructive evaluation of ferromagnetic steel due to mechanical loading[J].Electromagnetic Nondestructive Evaluation IOS Press, 2002: 135-142.
 
【10】KALETA J, PRZEYSLAW W. Magnetovision as a tool for investigation of fatigue process of ferromagnetics[C]//SAE Brasil International Conference on Fatigue.Brasil: [s.n], 2002.
 
【11】JOHN W, WILSON. Residual magnetic field sensing for stress measurement[J]. Sensors and Actuators, 2006, 135(2007): 381-387.
 
【12】林俊明.一种在役部件早期损伤的无损检测新方法[C]//2000年火电厂寿命管理与延寿国际会议暨全国第六届电站金属构件失效分析与寿命管理学术会议论文集.西安: 中国电机工程学会, 2000.
 
【13】任吉林, 林俊明.金属磁记忆检测技术[M].北京: 中国电力出版社, 2000.
 
【14】黎连修.磁记忆技术若干问题的讨论[J].无损检测, 2015, 37(2): 63-66.
 
【15】张卫民, 邱忠超, 袁俊杰, 等.关于利用金属磁记忆方法进行应力定量化评价问题的讨论[J].机械工程学报, 2015, 51(8): 9-13.
 
【16】YANG En, LI Lu-ming, CHEN Xing. Magnetic field aberration induced by cycle stress [J].Journal of Magnetism and Magnetic Materials, 2003, 261: 385-391.
 
【17】李一, 任尚坤.铁磁试件静拉伸时应力磁化的反转现象[J].钢铁研究学报, 2013, 25(3): 30-33.
 
【18】饶琪.磁记忆二维检测定量评价的研究[D].南昌: 南昌航空大学, 2014.
 
【19】周培.磁记忆二维检测定量分析[D].南昌: 南昌航空大学, 2013.
 
【20】任文坚.金属磁记忆检测技术基础问题的实验研究[D].南昌: 南昌航空大学, 2013.
 
【21】陈鑫彧.焊缝应力集中的磁记忆信号特征研究[D].大庆: 东北石油大学, 2011.
 
【22】胡先龙, 池永滨.磁记忆诊断技术中应力集中水平定量评估方法[J].华北电力技术, 2005(6): 9-13.
 
【23】张颖, 李彬, 周俊鹏, 等.15CrMoR钢焊接冷裂纹的磁记忆特性[J].无损检测, 2015, 37(5): 46-51.
 
【24】王慧鹏, 董丽虹, 董世运, 等.基于磁记忆的应力集中神经网络识别[J].理化检验-物理分册, 2013, 49(9): 576-579.
 
【25】刘斌, 付英, 于慧, 等.基于GGA算法磁记忆检测模型的研究[J].仪器仪表学报, 2014, 35(10): 2200-2207.
 
【26】刘斌, 曹阳, 付英, 等.基于NCPP平面波算法磁记忆信号特征研究[J].仪器仪表学报, 2015, 36(7): 1538-1547.
 
【27】任吉林, 邓胤, 刘海朝, 等.二维磁记忆检测仪器的研制与试验研究[J].南昌航空大学学报, 2014, 28(4): 43-49.
 
【28】李建勇.便携式金属磁记忆检测仪的设计研究[D].太原: 太原理工大学, 2013.
 
相关信息
   标题 相关频次
 金属磁记忆检测技术研究现状与发展前景
 8
 35冷轧钢在应力作用下的磁学特征
 6
 新型磁记忆检测仪器
 6
 磁记忆检测技术研究现状及展望
 5
 基于磁畴聚合模型的磁记忆效应机理研究
 5
 CNG储气瓶的金属磁记忆检测
 4
 磁饱和后的涡流检测信号的非涡流效应
 4
 钢丝绳疲劳的磁记忆检测系统
 4
 基于BP神经网络的油气管道缺陷磁记忆检测
 4
 基于磁记忆检测方法的45钢应力集中评价
 4
 基于有限元分析的磁记忆关联模型试验
 4
 交流电磁场检测技术中传感器的设计和信号的小波降噪
 4
 金属构件磁记忆效应影响因素研究
 4
 静载荷下硅钢片的磁畴结构变化
 4
 静载拉伸下20号钢磁记忆检测二维信号试验
 4
 疲劳试验下应力集中与磁信号的关系
 4
 碳纤维复合材料涂层厚度的涡流测量
 4
 应力对20号冷轧钢试件磁性特征的影响
 4
 35号冷轧钢在不同阶段应力作用下的磁效应特征
 3
 磁记忆检测周:专家谈发展进程?
 3
 磁记忆切向分量信号的检测试验
 3
 地磁场方向对应力集中引起的磁场畸变的影响
 3
 地磁场中铁磁构件应力集中区的力磁耦合模型
 3
 基于磁记忆机理的焊缝疲劳累积损伤特征
 3
 几种电磁无损检测方法的工作特征
 3
 某超临界机组锅炉受热面异种钢焊口开裂原因分析
 3
 应力对铁磁构件磁畴组织的影响
 3
 钻具试样的磁记忆检测技术研究
 3
 1 000 MW超超临界机组电动闸阀阀杆的断裂原因
 2
 10 t吊钩断裂原因分析
 2