Acoustic Emission Signal Propagation Characteristics of Glass Fiber Composite Material Plate
摘 要
以玻璃纤维复合材料板为研究对象,通过断铅试验分析了声发射信号在复合材料中的衰减规律和传播速度规律。根据试验结果对波速表达式进行了多项式拟合,得到了声发射信号沿任意方向传播时的传播速度,利用多项式计算得到的波速进行线性定位,其定位误差在3%以内,验证了波速-传播方向多项式的有效性,为后期玻璃纤维复合材料声发射源定位研究奠定了基础。
Abstract
Attenuation and speed law of acoustic emission signal in composite materials were analyzed through breaking the pencil lead to simulate acoustic emission signals in glass fiber composite material plate. The polynomial of propagation speed was got based on the measured result by fitting. The signal propagation velocity of any angle can be got through the polynomial of wave-direction of propagation. And the polynomial was verified by lead positioning test that the position error with the speed calculated by the polynomial was less than three percent,which laid a foundation for the research of acoustic emission source localization period of glass fiber reinforced plastic.
中图分类号 TG115.28 DOI 10.11973/wsjc201701004
所属栏目 试验研究
基金项目
收稿日期 2016/7/6
修改稿日期
网络出版日期
作者单位点击查看
备注马波(1970-),男,高级工程师,主要从事油田科研和油田地面工程检验检测等相关工作。
引用该论文: MA Bo,CHEN Jian-fei,LI Biao,YANG Yong,JIANG Wen-jun,CHOU Dong-quan,XIE Ke-ming,ZHOU Xian-jun. Acoustic Emission Signal Propagation Characteristics of Glass Fiber Composite Material Plate[J]. Nondestructive Testing, 2017, 39(1): 16~18
马波,陈健飞,李标,杨勇,江文军,仇东泉,谢珂铭,周先军. 玻璃纤维复合材料板声发射信号传播特性[J]. 无损检测, 2017, 39(1): 16~18
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】袁振明,马羽宽, 何泽云. 声发射技术及其应用[M]. 北京:机械工业出版社,1985.
【2】冯琰妮,禄芳菊,庞虎平,等.声发射波在不同复合材料容器表面的衰减特性[J]. 无损检测,2014,36(12):69-72.
【3】杨瑞峰,马铁华.声发射技术研究及应用进展[J].中北大学学报,2006,27(5):456-460.
【4】张少时,庄茁.复合材料与粘弹性力学[M].北京:机械工业出版社,2005.
【2】冯琰妮,禄芳菊,庞虎平,等.声发射波在不同复合材料容器表面的衰减特性[J]. 无损检测,2014,36(12):69-72.
【3】杨瑞峰,马铁华.声发射技术研究及应用进展[J].中北大学学报,2006,27(5):456-460.
【4】张少时,庄茁.复合材料与粘弹性力学[M].北京:机械工业出版社,2005.
相关信息