The Eddy Current Array Testing Technology of the Aluminum Alloy Welding Seam
摘 要
由于渗透检测中的渗透剂具有较强的渗透性,需考虑残留的渗透剂与产品的相容性问题,且渗透剂喷灌中的氟利昂对环境有污染,开展了铝合金熔焊缝涡流阵列检测技术的研究工作。结果表明,铝合金熔焊缝表面缺陷涡流阵列检测工艺可替代原有的着色渗透检测工艺。
Abstract
Dye-penetrant testing method is used to detect the surface defects of the aluminum alloy welding seam. The penetrant has a strong penetrating ability, and hence the compatibility of the residual penetrant and rocket fuel is needed to be considered. The Freon in penetrant sprinkler irrigation has pollution to the environment. The detection speed of PT is slow,and the detection results are affected by human factors.Aiming at to solve the above problems, the eddy current array testing technology of aluminum alloy welding seam is carried out, and the results showing that eddy current array testing technology of the aluminum alloy welding seam can replace the Dye-penetrant testing method.
中图分类号 TG115.28 DOI 10.11973/wsjc201703012
所属栏目 试验研究
基金项目
收稿日期 2016/7/10
修改稿日期
网络出版日期
作者单位点击查看
备注金翠娥(1985-),女,硕士,工程师,主要从事无损检测技术研究工作。
引用该论文: JIN Cui-e,ZHOU Jian-ping,FAN Chen-jie. The Eddy Current Array Testing Technology of the Aluminum Alloy Welding Seam[J]. Nondestructive Testing, 2017, 39(3): 47~50
金翠娥,周建平,范晨洁. 铝合金熔焊缝的阵列涡流检测工艺[J]. 无损检测, 2017, 39(3): 47~50
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】徐可北.涡流阵列检测技术[J].冶金分析,2004,24(S2):645-647.
【2】周建平.阵列涡流成像技术数值仿真及应用[J].无损检测,2014,36(12):42-45.
【3】高春法,宋凯,唐继红.涡流检测传感器提离效应的抑制[J].无损检测,2003,25(12):606-608.
【2】周建平.阵列涡流成像技术数值仿真及应用[J].无损检测,2014,36(12):42-45.
【3】高春法,宋凯,唐继红.涡流检测传感器提离效应的抑制[J].无损检测,2003,25(12):606-608.
相关信息