Dynamic Tensile Properties and Constitutive Model of 6061 Aluminum Alloy
摘 要
在0.08,35,110,210,550 s-1的应变速率下对6061铝合金进行单轴拉伸试验,对其动态拉伸性能进行研究,得到不同应变速率下的真应力-真应变曲线;基于Johnson-Cook本构模型,建立该铝合金的塑性变形本构模型,并对该模型进行了验证。结果表明:随着应变速率增加,6061铝合金的屈服强度增大,断后伸长率降低,但其断裂强度则未发生明显变化;建立的本构模型能够很好地描述6061铝合金在塑性变形过程中流变应力的变化。
Abstract
The dynamic tensile properties of 6061 aluminum alloy was studied by the uniaxial tensile experiment at strain rates of 0.08,35,110,210,550 s-1. The trure stress-ture strain curves were obtained at different strain rates. A plastic deformation constitutive model of the aluminum alloy was established based on the Johnson-Cook model, and the model was verified. The results show that, with the increase of strain rate, yield strength of 6061 aluminum alloy increased and elongation after fracuture decreased, but its fracture strength had not obvious changes. The constitutive model can describe well the change of flow stress of 6061 aluminum alloy during plastic deformation.
中图分类号 TG146.21 DOI 10.11973/jxgccl201703010
所属栏目 材料性能及应用
基金项目
收稿日期 2016/8/20
修改稿日期 2017/1/24
网络出版日期
作者单位点击查看
备注刘军(1991-),男,安徽阜阳人,硕士研究生。
引用该论文: LIU Jun,YANG Li-ming,XIE Shu-gang,WU Hao,ZHANG Sai,HUANG Ya-feng,CHENG Guo-yang,MENG Xian-ming. Dynamic Tensile Properties and Constitutive Model of 6061 Aluminum Alloy[J]. Materials for mechancial engineering, 2017, 41(3): 49~53
刘军,杨黎明,谢书港,吴昊,张赛,黄亚烽,程国阳,孟宪明. 6061铝合金的动态拉伸性能及其本构模型[J]. 机械工程材料, 2017, 41(3): 49~53
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】关绍康, 姚波, 王迎新. 汽车铝合金车身板材的研究现状及发展趋势[J]. 机械工程材料, 2001, 25(5):12-14.
【2】彭晓东, 李玉兰, 刘江. 轻合金在汽车上的应用[J]. 机械工程材料, 1999, 23(2):1-4.
【3】丁向群, 何国求, 陈成澍, 等. 6000系汽车车用铝合金的研究应用进展[J]. 材料科学与工程学报, 2005, 23(2):302-305.
【4】田成达. DP780高强钢动态力学行为研究[D]. 上海:上海交通大学, 2008.
【5】王孟君, 黄电源, 姜海涛. 汽车用铝合金的研究进展[J]. 金属热处理, 2006, 31(9):34-38.
【6】孟宪明, 谢书港, 方锐, 等. B340-590DP双相高强钢板的动态变形行为[J]. 钢铁研究学报, 2015, 27(6):51-55.
【7】刘宏, 赵刚, 刘春明, 等. 6000系铝合金组织性能的研究进展[J]. 机械工程材料, 2004, 28(6):1-4.
【2】彭晓东, 李玉兰, 刘江. 轻合金在汽车上的应用[J]. 机械工程材料, 1999, 23(2):1-4.
【3】丁向群, 何国求, 陈成澍, 等. 6000系汽车车用铝合金的研究应用进展[J]. 材料科学与工程学报, 2005, 23(2):302-305.
【4】田成达. DP780高强钢动态力学行为研究[D]. 上海:上海交通大学, 2008.
【5】王孟君, 黄电源, 姜海涛. 汽车用铝合金的研究进展[J]. 金属热处理, 2006, 31(9):34-38.
【6】孟宪明, 谢书港, 方锐, 等. B340-590DP双相高强钢板的动态变形行为[J]. 钢铁研究学报, 2015, 27(6):51-55.
【7】刘宏, 赵刚, 刘春明, 等. 6000系铝合金组织性能的研究进展[J]. 机械工程材料, 2004, 28(6):1-4.
相关信息