A Multiphase Flow Internal Corrosion Direct Assessment (ICDA) Method for Subsea Pipeline
摘 要
提出了一种适用于海上油田海底管道多相流内腐蚀直接评价(ICDA)方法;基于海底管道基础数据、生产工况以及油气水检测数据,对介质流态的热力学、动力学和水力学影响因子进行分析,评估海管内腐蚀发生的位置及最大局部腐蚀速率;将南海多条海管的直接检测数据与ICDA结果进行对比。结果表明:ICDA评估方法能够准确地反映海管实际内腐蚀状况,为不能采用智能通球FML内检测的海管提供了一种有效的内腐蚀评估方法。
Abstract
A multiphase flow internal corrosion direct assessment (ICDA) method for subsea pipeline of offshore oil field was proposed. The influence factors for thermodynamics, dynamics and hydraulics of flow states were analyzed synthetically based on the basic data of subsea pipeline, production conditions and the inspection data of oil, gas and water. The location of the occurrence of internal corrosion and the maximum corrosion rate of localized corrosion were assessed. And Data from direct testing for subsea pipelines in the South China Sea and from ICDA method were compared. The results show that ICDA method could accurately detect the internal corrosion in subsea pipelines, providing a valid method of internal corrosion assessment for the subsea pipeline which is not suitable for intelligent pigging MFL internal inspection.
中图分类号 TG174 DOI 10.11973/fsyfh-201706014
所属栏目 应用技术
基金项目
收稿日期 2015/11/18
修改稿日期
网络出版日期
作者单位点击查看
引用该论文: YANG Tianxiao,CUI Jianjie. A Multiphase Flow Internal Corrosion Direct Assessment (ICDA) Method for Subsea Pipeline[J]. Corrosion & Protection, 2017, 38(6): 475
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】李晓刚,付冬梅,董超芳,等. 石油化工腐蚀适应性评估专家系统研制[J]. 中国腐蚀与防护学报,2002,22(5):265-267.
【2】陈东,柳伟,路民旭,等. CO2分压对N80钢腐蚀产物膜保护性能的影响[J]. 北京科技大学学报,2007,29(3):290-292.
【3】李桐,高克玮,路民旭. X65钢CO2腐蚀产物膜形成机理[J]. 中国腐蚀与防护学报,2007,27(6):339-340.
【4】白真权,李鹤林,刘道新,等. 模拟油田H2S/CO2环境中N80钢的腐蚀及影响因素研究[J]. 材料保护,2003,36(4):30-31.
【5】周晴. 油气田开发中的CO2腐蚀与控制[J]. 油气田地面工程,2005,24(11):46.
【6】周琦,赵红顺,常春雷,等. X65钢在高温高压CO2酸性溶液中的腐蚀行为[J]. 材料开发与应用,2007:40-43.
【7】陶春达,孟坤六. 输油管弯头腐蚀缺陷应力分析[J]. 管道技术与设备,2007(4):25-26.
【8】刘争芬,张鹏. 多相流管线的内腐蚀直接评价方法[J]. 管道技术与设备,2007(4):33-35.
【9】NACE SP0206-2006 Internal corrosion direct assessment methodology for pipelines carrying normally dry natural gas (DG-ICDA)[S].
【2】陈东,柳伟,路民旭,等. CO2分压对N80钢腐蚀产物膜保护性能的影响[J]. 北京科技大学学报,2007,29(3):290-292.
【3】李桐,高克玮,路民旭. X65钢CO2腐蚀产物膜形成机理[J]. 中国腐蚀与防护学报,2007,27(6):339-340.
【4】白真权,李鹤林,刘道新,等. 模拟油田H2S/CO2环境中N80钢的腐蚀及影响因素研究[J]. 材料保护,2003,36(4):30-31.
【5】周晴. 油气田开发中的CO2腐蚀与控制[J]. 油气田地面工程,2005,24(11):46.
【6】周琦,赵红顺,常春雷,等. X65钢在高温高压CO2酸性溶液中的腐蚀行为[J]. 材料开发与应用,2007:40-43.
【7】陶春达,孟坤六. 输油管弯头腐蚀缺陷应力分析[J]. 管道技术与设备,2007(4):25-26.
【8】刘争芬,张鹏. 多相流管线的内腐蚀直接评价方法[J]. 管道技术与设备,2007(4):33-35.
【9】NACE SP0206-2006 Internal corrosion direct assessment methodology for pipelines carrying normally dry natural gas (DG-ICDA)[S].
相关信息