Design and Development of Numerical Simulation Software for Cathodic Protection of Stations Based on Boundary Element Method
摘 要
边界元法在阴极保护电位分布计算方面有着明显的优势,采用边界元法对数值模型边界进行离散,计算节点少,计算速率快。站场阴极保护数值模拟软件基于边界元法对站场阴极保护电位分布进行计算,得到可视化结果,通过该结果可以发现屏蔽和干扰位置,对辅助阳极位置进行优化,从而解决站场阴极保护系统腐蚀区域不能预测的困难,使站场阴极保护系统工程更加合理有效。
Abstract
Boundary element method in distributed computing of cathodic protection potential has a distinct advantage. When the boundary element method to scatter a numerical model was used, the calculation nodes were less and calculation speed was fast. The software based on the boundary element method calculated the cathodic protection potential distribution in cathodic station, and the results were visual, shielding and interference position could be found through the results, auxiliary anode position could be optimized in order to resolve the difficulty that the station cathodic corrosion protection system area could not be predicted, so the station cathodic protection system engineering could be more rational and effective.
中图分类号 TE88 DOI 10.11973/fsyfh-201707015
所属栏目 应用技术
基金项目
收稿日期 2016/1/15
修改稿日期
网络出版日期
作者单位点击查看
引用该论文: LIAO Kexi,MA Xiaolei,ZHANG Zhongfang,ZHOU Weijun,ZHANG Yao,REN Chiyuan. Design and Development of Numerical Simulation Software for Cathodic Protection of Stations Based on Boundary Element Method[J]. Corrosion & Protection, 2017, 38(7): 551
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】陈洪源,范志刚,刘玲莉,等. 区域性阴极保护技术在输气站场中的应用[J]. 油气储运,2005,24(5):41-44.
【2】张丰,陈洪源,李国栋,等. 数值模拟在管道和站场阴极保护中的应用[J]. 油气储运,2011,30(3):208-212.
【2】张丰,陈洪源,李国栋,等. 数值模拟在管道和站场阴极保护中的应用[J]. 油气储运,2011,30(3):208-212.
相关信息