Interpretation of Key Issues about New Version of GB/T 7704
摘 要
分析了我国X射线应力测试技术的发展现状,在深入理解欧盟标准EN 15305-2008的基础上,对新版GB/T 7704中若干关键问题进行了解析,阐述了其必要性、合理性和可行性,以帮助广大X射线应力测试工作者正确理解和执行标准,为获得比较可靠的试验结果提供必要的理论解惑和技术支持。
Abstract
The current development situation of domestic X-ray measuring technique of residual stress was analyzed. Based on in-depth understanding of EU standard EN 15305-2008, some key issues of new version of GB/T 7704 were expounded, and the necessity, rationality and feasibility were also set forth. The purpose was to help X-ray measuring testers understand and carry out the standard correctly, and provide the necessary theoretical guidance and technical support to get the reliable testing results.
中图分类号 TG115.2 DOI 10.11973/lhjy-wl201707001
所属栏目 专题报道(残余应力)
基金项目
收稿日期 2017/4/5
修改稿日期
网络出版日期
作者单位点击查看
备注吕克茂(1941-),男,教授级高工,主要从事X射线残余应力测试技术和设备研究,tianzhongshan1941@163.com
引用该论文: LÜ,Kemao,BA Fahai,LÜ,Dongyan. Interpretation of Key Issues about New Version of GB/T 7704[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2017, 53(7): 457~465
吕克茂,巴发海,吕东艳. 新版GB/T 7704关键问题解析[J]. 理化检验-物理分册, 2017, 53(7): 457~465
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】GB/T 7704-1987 X射线应力测定方法[S].
【2】MACHERAUCH E, WOHLFAHRT H, WOLFSTIEG U. Zur zweckmäßigen definition von digenspannungen[J]. Härtereitechnische Mitteilungen, 1973(28):203-211.
【3】EN 15305-2008 Non-destructive testing-Test method for residual stress analysis by X-ray diffraction[S].
【4】MACHERAUCH E, MVELLER P. Das sin2ψ-verfahren der r ntgenographischen Spannungsmessung[J]. Zeitschrift für Angewandte Physik, 1961(13):305-312.
【5】李家宝.入射线无负η倾角侧倾法X射线应力测定技术[J].金属学报,1977,(z1):6-27.
【6】ASTM E915-2010 Standard test method for verifying the alignment of X-Ray diffraction instrumentation for residual stress measurement[S].
【2】MACHERAUCH E, WOHLFAHRT H, WOLFSTIEG U. Zur zweckmäßigen definition von digenspannungen[J]. Härtereitechnische Mitteilungen, 1973(28):203-211.
【3】EN 15305-2008 Non-destructive testing-Test method for residual stress analysis by X-ray diffraction[S].
【4】MACHERAUCH E, MVELLER P. Das sin2ψ-verfahren der r ntgenographischen Spannungsmessung[J]. Zeitschrift für Angewandte Physik, 1961(13):305-312.
【5】李家宝.入射线无负η倾角侧倾法X射线应力测定技术[J].金属学报,1977,(z1):6-27.
【6】ASTM E915-2010 Standard test method for verifying the alignment of X-Ray diffraction instrumentation for residual stress measurement[S].
相关信息