Repeatability and Accuracy of Tensile Property Measured by Instrumented Indentation Technique
摘 要
采用新型便携式压痕仪和传统万能拉伸试验机两种测试仪器,对相同种类和尺寸的碳钢试块进行了拉伸性能测试,测试试块的屈服强度和抗拉强度,以验证仪器化压痕试验结果的重复性和准确性。结果表明:仪器化压痕技术测试屈服强度和抗拉强度的重复性较好,准确性较高;不同于现有的破坏性测试设备和评估方法,压痕系统使用无损害、经济和高效的仪器化压痕测试方法,可以通过评估从局部区域的纳米尺度到现有工业设施的宏观属性来提供可靠的解决方案。
Abstract
The tensile property property tests were carried out on the carbon steel blocks of the same type and dimension by both new type of portable hardness tester and the traditional universal tensile machine. The yield strength and tensile strength of test blocks were tested to verify the repeatability and accuracy of the test results. The results show that:the test results of yield strength and tensile strength obtained by the instrumented indentation technique had good repeatability and high accuracy; different from the existing destructive measurement equipment and evaluation methods, the non-destructive, economical and efficient instrumented indentation testing method was used in indentation system; the reliable solutions could be provided through assessing from nanoscale size in local region to macroscopic properties of industrial facilities.
中图分类号 TG115.5 DOI 10.11973/lhjy-wl201707008
所属栏目 试验与研究
基金项目
收稿日期 2016/8/1
修改稿日期
网络出版日期
作者单位点击查看
备注李得彬(1984-),男,工学硕士,主要从事无损检测方面的研究,lideb2007@163.com
引用该论文: LI Debin,WANG Xianfeng. Repeatability and Accuracy of Tensile Property Measured by Instrumented Indentation Technique[J]. Physical Testing and Chemical Analysis part A:Physical Testing, 2017, 53(7): 491~495
李得彬,王先锋. 仪器化压痕技术测试拉伸性能的重复性和准确性[J]. 理化检验-物理分册, 2017, 53(7): 491~495
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】KSB 0950:2002压痕法测试拉伸性能[S].
【2】KSB 0951:2005压痕法测试残余应力[S].
【3】KEPIC-MDFA370 CODE:2006压痕法测试拉伸性能和残余应力[S].
【4】ISO/TR 29381:2008 Metallic materials-Measurement of mechanical properties by an instrumented indentation test-Indentation tensile properties[S].
【5】李和平,杨晓晨,李颖,等.仪器化压痕技术的发展和面临的问题[J].工程与试验,2011,51(z1):3-6.
【6】魏中坤.连续球压痕法测试材料J_(0.05)的研究[D].上海:华东理工大学,2015.
【7】JEON S W,KIM J H, KWON O, et al. 适合材料力学性能评价的仪器化压痕法的应用[C]//中国力学大会2015论文集.上海:中国力学学会,2015.
【8】蒋云,孙延松,许学龙,等.压痕法技术在电站设备材料力学性能检测中的研究和应用[C]//中国电机工程学会金属材料专委会第一届学术年会论文集.西安:中国电机工程学会金属材料专委会,2015:6-11.
【9】伍声宝.连续球压痕法表征金属材料拉伸性能的研究[D].上海:华东理工大学,2016.
【2】KSB 0951:2005压痕法测试残余应力[S].
【3】KEPIC-MDFA370 CODE:2006压痕法测试拉伸性能和残余应力[S].
【4】ISO/TR 29381:2008 Metallic materials-Measurement of mechanical properties by an instrumented indentation test-Indentation tensile properties[S].
【5】李和平,杨晓晨,李颖,等.仪器化压痕技术的发展和面临的问题[J].工程与试验,2011,51(z1):3-6.
【6】魏中坤.连续球压痕法测试材料J_(0.05)的研究[D].上海:华东理工大学,2015.
【7】JEON S W,KIM J H, KWON O, et al. 适合材料力学性能评价的仪器化压痕法的应用[C]//中国力学大会2015论文集.上海:中国力学学会,2015.
【8】蒋云,孙延松,许学龙,等.压痕法技术在电站设备材料力学性能检测中的研究和应用[C]//中国电机工程学会金属材料专委会第一届学术年会论文集.西安:中国电机工程学会金属材料专委会,2015:6-11.
【9】伍声宝.连续球压痕法表征金属材料拉伸性能的研究[D].上海:华东理工大学,2016.
相关信息