Effect of Scanning Strategy and Preheating Temperature on Properties of Large-Scale AlSi10Mg Alloy Prepared by Selective Laser Melting
摘 要
采用激光选区熔化技术制备大尺寸AlSi10Mg合金试样,研究了扫描方式(棋盘式扫描与均匀扫描)及基板预热温度(80℃和120℃)对AlSi10Mg合金试样显微组织、密度和力学性能等的影响。结果表明:扫描方式是影响试样相对密度、拉伸性能和冲击性能的主要因素,而预热温度主要影响试样的硬度;预热温度80℃、棋盘式扫描方式下试样的相对密度最大(98.69%),拉伸性能和冲击韧性最好;预热120℃、棋盘式扫描方式下试样的硬度最高(257 HV)。
Abstract
The influence of scanning strategy (chessboard scanning and meander scanning) and substrate preheating temperature (80℃ and 120℃) on microstructure, mechanical properties and density of large-scale AlSi10Mg alloy sample prepared by selective laser melting. The results show that relative density, impact property and tensile property were mainly affected by the scanning strategy, while the preheating temperature determined the hardness of sample. When scanning strategy was chessboard scanning and preheating was at 80℃, the sample had the highest relative density (98.69%), the best tensile property and impact toughness. When scanning strategy was chessboard scanning and preheating was at 120℃, the sample had the highest hardness (257 HV).
中图分类号 TB31 DOI 10.11973/jxgccl201710012
所属栏目 新材料 新工艺
基金项目
收稿日期 2016/6/1
修改稿日期 2017/6/9
网络出版日期
作者单位点击查看
备注孙靖(1989-),女,陕西渭南人,工程师,硕士
引用该论文: SUN Jing,ZHU Xiaogang,WANG Lianfeng,CHENG Lingyu,ZHANG Chenglin. Effect of Scanning Strategy and Preheating Temperature on Properties of Large-Scale AlSi10Mg Alloy Prepared by Selective Laser Melting[J]. Materials for mechancial engineering, 2017, 41(10): 52~57
孙靖,朱小刚,王联凤,程灵钰,张成林. 扫描方式与预热温度对激光选区熔化制备大尺寸AlSi10Mg合金性能的影响[J]. 机械工程材料, 2017, 41(10): 52~57
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】王东山, 薛向欣, 刘然,等. B4C/Al复合材料的研究进展及展望[J]. 材料导报, 2007, 21(s1):388-390.
【2】沈春雷, 石建敏, 张玲,等. 球磨工艺对B4C-Al复合粉末性能的影响[J]. 功能材料, 2011, 42(S2):365-369.
【3】MACHIELS A, LAMBERT R. Handbook of neutron absorber materials for spent nuclear fuel transportation and storage applications[M]. California:Electric Power Research Institute, 2009.
【2】沈春雷, 石建敏, 张玲,等. 球磨工艺对B4C-Al复合粉末性能的影响[J]. 功能材料, 2011, 42(S2):365-369.
【3】MACHIELS A, LAMBERT R. Handbook of neutron absorber materials for spent nuclear fuel transportation and storage applications[M]. California:Electric Power Research Institute, 2009.
相关信息