Productive Technology and Mechanical Property of SM55 Steel Cavity Forging Die Block
摘 要
对SM55模具钢的一种型腔大模块的锻造加工工艺及加工后材料的组织与力学性能进行了试验研究。结果表明:通过对钢锭进行多火次、多方向锻造,控制不同火次、不同方向的压下量,利用锻造工具进行锻压型腔等生产工艺,生产出了型腔模块外形良好,型腔模块纵向不同位置力学性能、显微组织等较好的模块,SM55钢型腔模块能够满足模具的使用要求。
Abstract
This paper studies the forging productive technology,microstructure and property of SM55 cavity forging die block. The results show that we can produce SM55 cavity die block though the productive technology include that repeatedly forging times and directions,controlling the rolling reduction of different forging times and directions, using specialtools forging the cavity. The outline of cavity forging die block is excellent. We have tested the vertical mechanical property and microscopic structure of SM55 cavity die block. Tests have shown that SM55 steel cavity forging die blockcan satisfy requirements ofthe using measures.
中图分类号 TG31
所属栏目
基金项目
收稿日期
修改稿日期
网络出版日期
作者单位点击查看
备注马野(1982-),工程师,学士,从事模具材料研发
引用该论文: MA Ye,YAN Yun,YU Haipeng. Productive Technology and Mechanical Property of SM55 Steel Cavity Forging Die Block[J]. Materials for mechancial engineering, 2017, 41(Z2): 74~76
马野,燕云,于海鹏. SM55模具钢锻造型腔模块生产工艺及力学性能[J]. 机械工程材料, 2017, 41(Z2): 74~76
共有人对该论文发表了看法,其中:
人认为该论文很差
人认为该论文较差
人认为该论文一般
人认为该论文较好
人认为该论文很好
参考文献
【1】陈诗荪.合金钢锻造[M]. 北京:国防工业出版社,1984:25.
【2】陈再枝,蓝得年.模具钢手册[M].北京:冶金工业出版社,2000:14.
【3】陈再枝,马党参.塑料模具钢应用手册[M].北京:化学工业出版社.2005:29
【2】陈再枝,蓝得年.模具钢手册[M].北京:冶金工业出版社,2000:14.
【3】陈再枝,马党参.塑料模具钢应用手册[M].北京:化学工业出版社.2005:29
相关信息